Browse > Article
http://dx.doi.org/10.15207/JKCS.2020.11.9.169

A Convergent Study on the Structural Analysis of Automotive Support Beam  

Choi, Kye-Kwang (Department of Metal Mold Design Engineering, Kongju national University)
Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
Publication Information
Journal of the Korea Convergence Society / v.11, no.9, 2020 , pp. 169-173 More about this Journal
Abstract
The structural analysis was performed at this study when the axle was loaded by using a total of three automotive support beam models, models A, B and C. Comparing with three models A, B, and C, the equivalent stress is considered to be good for its durability because model C is less than the yield stress of the material. The maximum equivalent stresses happening at models A and B are 1.8 times and 2.5 times higher than the yield stress, respectively, indicating that the material is fractured. So, it does not seem to be efficient as a support beam. Model C can be applied efficiently to the improvement design of axle support beams in terms of durability compared to models A and B. The strength of automotive support beam can be evaluated by applying this research result to the automotive part. And it is seen that this study is adequate at the efficient design and aesthetic convergence practically.
Keywords
Automotive support beam; Equivalent stress; Total deformation; Structural analysis; Convergence;
Citations & Related Records
Times Cited By KSCI : 13  (Citation Analysis)
연도 인용수 순위
1 K. S. Moon, K. S. Jung, J. H. Sang & J. P. Gyung. (2007). Structural analysis and optimization of a low-speed vehicle body. Journal of Automobile Engineering, 221(3), 313-326. DOI : 10.1243/09544070JAUTO36   DOI
2 S. R. Park, D. C. Shim, D. Kim & M. Y. Lyu. (2010). A Study on the Structural Analysis for Plastic Door Handle of Automobile. Transactions of Materials Processing, 19(3), 185-190. DOI : 10.5228/KSPP.2010.19.3.185   DOI
3 J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis. Journal of the Korea Convergence Society, 6(4), 99-105. DOI : 10.15207/jkcs.2015.6.4.099   DOI
4 B. Y. Kang, Y. H. Kim, D. W. Kim, M. H. Kim, J. Y. Han & C. H. Hong. (2011). A Study of the FE Analysis Technique of Hybrid Blades for Large Scale Wind-Turbine. Journal of Ocean Engineering and Technology, 25(1), 61-66. DOI : 10.5574/KSOE.2011.25.1.061   DOI
5 J. U. Cho. (2015). Study on Convergence Technique through Strength Analysis of Stabilizer Link by Type. Journal of the Korea Convergence Society, 6(1), 57-63. DOI : 10.15207/JKCS.2015.6.1.057   DOI
6 Y. K. Park & B. G. Lee. (2018). A Study on the Structural Analysis of the Spindle of Swiss Turn Type Lathe for Ultra Precision Convergence Machining. Journal of the Korea Convergence Society, 9(5), 145-150. DOI : 10.15207/JKCS.2018.9.5.145   DOI
7 J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Structural Analysis due to the Height of the Walker, Journal of the Korea Convergence Society, 6(2), 19-24. DOI : 10.15207/jkcs.2015.6.2.019   DOI
8 J. I. Lee. (2017). The Convergence Design for Stiffness and Structure Advancement of Automotive Body. Journal of the Korea Convergence Society, 8(4), 189-197. DOI : 10.15207/JKCS.2017.8.4.189   DOI
9 J. S. Lee. (2018). Structural Analysis of a 24 Person Elevator Emergency Brake. Journal of the Korea Convergence Society, 9(12), 189-194. DOI : 10.15207/JKCS.2018.9.12.189   DOI
10 Y. T. Oh. (2017). Study on the Structural Analysis of SCARA Industrial Robot. Journal of the Korean Society of Mechanical Technology, 19(6), 866-871. DOI : 10.17958/ksmt.19.6.201712.866   DOI
11 Y. S. Lee & Y. Y. Yang. (2017). Study on Structural Analysis of Variable Roll Unit for Drawing Process of SUS Hexagonal Bar. Journal of the Korean Society of Mechanical Technology, 19(6), 827-833. DOI : 10.17958/ksmt.19.6.201712.827   DOI
12 J. H. Ko & D. M. Kang. (2014). CAE Analysis on Strength and Fatigue of Rear Door of Passenger Car. Journal of the Korean Society of Manufacturing Process Engineers, 13(3), 63-69. DOI : 10.14775/ksmpe.2014.13.3.063   DOI
13 S. H. Ha, S. J. Kim & J. I. Song. (2014). Structure Analysis and Torque Reduction Design of Industrial Ball Valve. Journal of the Korean Society of Manufacturing Process Engineers, 13(6), 37-45. DOI : 10.14775/ksmpe.2014.13.6.037   DOI
14 W. B. Lee, S. H. Ryu, W. Y. Hao & B. P. Kyung. (2015). Dismantling Simulation of Nuclear Reactor Using Partial Mesh Cutting Method for 3D Model. Journal of Digital Convergence, 13(4), 303-310.   DOI
15 J. L. Cui, M. H. Chey & S. I. Kim. (2016). Seismic Performance of Urban Structures with Various Horizontal Irregularities using Equivalent Static Analysis. Journal of Convergence for Information Technology, 6(1), 25-32.