Browse > Article
http://dx.doi.org/10.15207/JKCS.2020.11.5.159

Convergent Investigation on Flow Analysis According to the Inlet Port of Air at Car  

Oh, Bum-Suk (Division of Mechanical & Automotive Engineering, Kongju National University)
Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
Publication Information
Journal of the Korea Convergence Society / v.11, no.5, 2020 , pp. 159-164 More about this Journal
Abstract
In this study, the flow analysis of air in the inner side of vehicle due to the position on inlet port of air at car was carried out. Under the comfortable condition as the inlet port in which the air flows, it was possible to confirm that the inlets became the upper and middle sides or the forward side of the vehicle. If the air flow is not evenly distributed within the vehicle, the lower position of the vehicle is the lowest condition among all conditions. The results of this study will help to keep the inner state of the vehicle pleasant by adjusting the location of the inlet to suit the passenger's taste or situation. The design and analysis results of this study can be effectively applied at adjusting the location of the inlet at car. By applying the flow analysis according to the inlet port of air at car, this paper is seen as the convergence study that conforms to aesthetic design.
Keywords
Car; Inlet port of air; Flow analysis; Inlet port; Air; Convergence;
Citations & Related Records
Times Cited By KSCI : 16  (Citation Analysis)
연도 인용수 순위
1 H. C. Lee & J. U. Cho. (2014). A Study on Air Flow Analysis due to the Shape of Automotive Body. Journal of the Korea Convergence Society, 5(2), 19-23. Doi : 10.15207/jkcs.2014.5.2.019   DOI
2 O. B. Suk & J. U. Cho. (2018). A Convergence Study through Flow Analysis due to the Configuration of Automotive Air Breather. Journal of the Korea Convergence Society, 9(10), 265-270. Doi : 10.15207/JKCS.2018.9.10.265   DOI
3 S. H. Jung. (2017). The Control of Spring-Mass-Damper Convergence System using $H{\infty}$ Controller and ${\mu}$-Synthesis Controller. Journal of the Korea Convergence Society, 8(5), 1-11. Doi : 10.15207/JKCS.2017.8.5.001   DOI
4 J. U. Cho. (2014). A Flow Analysis on Wing Shape of Cooling Fan at Automobile. Journal of the Korea Convergence Society, 5(4), 75-79. Doi : 10.15207/jkcs.2014.5.4.075   DOI
5 J. U. Cho. (2015). Study on Convergence Technique through the Flow Analytical Study inside the Faucet for Bathroom. Journal of the Korea Convergence Society, 6(2), 37-42. Doi : 10.15207/JKCS.2015.6.2.037   DOI
6 B. S. Oh & J. U. Cho. (2019). Convergence Study on Durability Analysis of Scooter Seat. Journal of the Korea Convergence Society, 10(6), 165-170. Doi : 10.15207/JKCS.2019.10.6.165   DOI
7 J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Flow Analysis at the Flexible Joint of the Pipe Laying. Journal of the Korea Convergence Society, 6(3), 13-18. Doi : 10.15207/JKCS.2015.6.3.013   DOI
8 H. C. Lee & J. U. Cho. (2014). A Study on Air Flow Analysis due to the Shape of Automotive Body. Journal of the Korea Convergence Society, 5(2), 19-23. Doi : 10.15207/JKCS.2014.5.2.019   DOI
9 R. D. Gyeom & L. K. Bock. (2019). Flow Characteristics and Wind Loads on the Solar Panel and Floating System of Floating Solar Generato. Journal of the Korea Academia-Industrial cooperation Society, 20(10), 229-235. Doi : 10.5762/KAIS.2019.20.10.229
10 D. W. Jeong, Y. S. Won & S. H. Kang. (2019). Comparison Study on Aerodynamic Performance and Wake Flow Field for a MW-Class Wind Turbine Model. Journal of the Korean Society of Visualization, 17(2), 32-38. Doi : 10.5407/jksv.2019.17.2.032   DOI
11 K. C. Ahn, B. H. Kim & C. W. Lee. (2014). Flow Analysis of Flowmeter for High-Viscosity Paint Spraying System. Journal of the Korean Society of Mechanical Technology, 16(4), 1709-1714. Doi : 10.17958/ksmt.16.4.201408.1709   DOI
12 D. R. Lee. (2015). Flow Analysis of a Thermopneumatic Micropump For Different Shapes of PDMS Membrane. Journal of the Korean Society of Mechanical Technology, 17(2), 245-250. Doi : 10.17958/ksmt.17.2.201504.245   DOI
13 H. J. Kim & Y. M. Lee. (2014). Experimental Study on Air Flow Characteristics of Axial Dual-blade Fan. Journal of the Korean Society of Manufacturing Process Engineers, 13(4), 113-120. Doi : 10.14775/ksmpe.2014.13.4.113   DOI
14 C. W. Jun, J. H. Sohn & M. S. Yang. (2017). Comparison of Fluid Modeling Methods Based on SPH and ISPH for a Buoy Design for a Wave Energy Converter. Journal of the Korean Society of Manufacturing Process Engineers, 16(3), 94-99. Doi : 10.14775/ksmpe.2017.16.3.094
15 S. Y. Lee & S. C. Kim. (2015). Flow Analysis for Optimal Design of Small Gear Pump, Journal of Energy Engineering, 24(1), 88-96. Doi : 10.5855/ENERGY.2015.24.1.088   DOI