Browse > Article
http://dx.doi.org/10.15207/JKCS.2020.11.11.233

A Convergent Study on Heat Transfer at Brake Disc of Electric Kickboard  

Choi, Kye-Kwang (Department of Metal Mold Design Engineering, Kongju national University)
Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University)
Publication Information
Journal of the Korea Convergence Society / v.11, no.11, 2020 , pp. 233-237 More about this Journal
Abstract
In this study, the thermal analysis on the brake disc of electric kickboard was analyzed. The different heat is transmitted depending on the pad contact surface of brake disc. The trend that the temperature decreases at the part away from the contact surface was almost constant. And model A showed a slightly lower temperature distribution than model B. Model A has a maximum equivalent stress of 7% higher than model B. By being applied with the higher heat transfer above the contact surface, it is thought that model B has a greater strength than model A if the design takes into account the corner of the brake disc. If this study result is utilized to the design of electric kickboard, the design of brake disc with better strength is considered to be established. The durability of brake against the heat can be evaluated by applying this study result to the brake disc of electric kickboard. And it is seen that the result can be the design of brake with strength and the aesthetic convergence.
Keywords
Electric kickboard; Brake disk; Heat transfer; Temperature; Thermal stress; Convergence;
Citations & Related Records
Times Cited By KSCI : 17  (Citation Analysis)
연도 인용수 순위
1 Z. Y. Guo, D. Y. Li & B. X. Wang. (1998). A novel concept for convective heat transfer enhancement. International Journal of Heat and Mass Transfer, 41(14), 2221-2225. DOI: 10.1016/S0017-9310(97)00272-X   DOI
2 M. C. Jung, S. G. Yoon, D. J. Yoon & J. S. Suh. (2020). Numerical Analysis of Heat Transfer Characteristics inside a Solenoid Motor System. Journal of the Korean Society of Manufacturing Process Engineers, 19(4), 99-104. DOI: 10.14775/ksmpe.2020.19.04.099   DOI
3 Y. S. Yang & K. Y. Bae. (2020). Analysis of Thermal Stress and Fatigue Life in the Steel Shell of a Cupola Furnace. Journal of the Korean Society of Manufacturing Process Engineers, 9(2), 47-54. DOI: 10.14775/ksmpe.2020.19.02.047   DOI
4 K. J. Kim & S. T. Won. (2020). Coupled Simulation of Thermal Stress by using Input Values Through Temperature Distribution by Thermal Conduction After Heat Transfer Analysis for 2.9 Liter Indirect Injection Engine Piston. Journal of the Korean Society of Mechanical Technology, 22(3), 463-468. DOI: 10.17958/ksmt.22.3.202006.463   DOI
5 E. T. Swartz & R. O. Pohl. (1989). Thermal boundary resistance. Reviews of Modern Physics, 61, 605-668. DOI: 10.1103/RevModPhys.61.605   DOI
6 B. S. Oh & J. U. Cho. (2020). Convergent Analysis through Durability by Thermal Stress at Drum Brake. Journal of the Korea Convergence Society, 11(5), 139-144. DOI: 10.15207/JKCS.2020.11.5.139   DOI
7 G. G. Choi & J. U. Cho. (2017). Convergence Study due to the Configuration of Radiant Heat Panel of Automotive LED Heat Lamp. Journal of the Korea Convergence Society, 8(3), 199-204. DOI: 10.15207/JKCS.2017.8.3.199   DOI
8 H. H, Hyeon, B. H, Jeong, J. W. Kim & K. Y. Lee. (2019). A Comparison of Performance on the Orthogonal and Refraction Heat Exchanger Shape in Air Ventilation System. Journal of the Korea Convergence Society, 10(7), 281-287. DOI: 10.15207/JKCS.2019.10.7.281   DOI
9 J. H. Lee & J. U. Cho. (2015). Convergence Technique Study through Simulation Thermal Analysis due to the Shape of Electric Heater. Journal of the Korea Convergence Society, 6(6), 241-246. DOI: 10.15207/JKCS.2015.6.6.241   DOI
10 G. G. Choi & J. U. Cho. (2019). Convergence Study on the Thermal Stress According to the Structure of Automotive Heating Seat. Journal of the Korea Convergence Society, 10(7), 169-174. DOI: 10.15207/JKCS.2019.10.7.169   DOI
11 B. S. Oh & J. U. Cho. (2020). A Convergent Investigation on Structural Analysis with Thermal Stress at the Shape of Brake Disk for Racing Car. Journal of the Korea Convergence Society, 11(6), 209-213. DOI: 10.15207/JKCS.2020.11.6.209   DOI
12 K. S. Moon, K. S. Jung, J. H. Sang & J. P. Gyung. (2007). Structural analysis and optimization of a low-speed vehicle body. Journal of Automobile Engineering, 221(3), 313-326. DOI: 10.1243/09544070JAUTO36   DOI
13 S. C. Han & B. G. Lee. (2018). A Study on Convergence Contact Behavior of Friction Heat and Pad on Disk Brake. Journal of the Korea Convergence Society, 9(1), 283-289. DOI: 10.15207/JKCS.2018.9.1.283   DOI
14 S. H. Chang. (2015). A Consider Mechanical Rock Excavation Focusing on TBM and Roadheader. Journal of Korean Society Mineral Energy Resources Engineers, 52(5), 531-548. DOI: 10.12972/ksmer.2015.52.5.531   DOI
15 C. W. Park. (2011). Injection Molding and Structure Analysis of Inline Skate Frames Using FEA. Journal of the Korean Society of Mechanical Technology, 35(11), 1507-1514. DOI: 10.3795/ksme-a.2011.35.11.1507   DOI