Browse > Article
http://dx.doi.org/10.15207/JKCS.2017.8.4.199

Development of 3D printer heating block using clad plate material  

Won, Dae-Hee (Department of Smart Automobile Engineering, Wonkwang University)
Publication Information
Journal of the Korea Convergence Society / v.8, no.4, 2017 , pp. 199-205 More about this Journal
Abstract
In this study, the design analysis and the explosion welding were made into a clad sheet by the convergence method in order to solve the problem of heat transfer to the guide due to the heating of the 3D printer heating block. The shear strength of the clad plate material was tested and the results were analyzed by thermal analysis, thermal conductivity and thermal imaging. The following conclusions were obtained. 3D modeling of the heating block made of copper and titanium clad plate material The thermal analysis showed that the surface temperature of the filament guide area was lower than the heating block surface temperature. The average shear strength of copper and titanium clad plate material was measured and the average value of 195.6MPa was obtained. The thermal conductivity of the heating block made of copper and titanium clad plate material was measured three times and the average value was $62.52W/m{\cdot}K$. The surface temperature of the heating block made of copper and titanium clad plate material was measured by a thermal imaging camera at a maximum of $107.3^{\circ}C$ and $183.2^{\circ}C$ at the filament guide. The temperature distribution was $89^{\circ}C$ lower than that of the existing filament.
Keywords
Heating block; 3D printing; Thermal conductivity; Titanium; Convergence;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 P. S. Jang, W. H. Jung, J. S. Hyun, “Effect of Abstraction and Realism on Uncanny Valley In 3D Character Model,” Journal of Digital Convergence, Vol. 14, No. 10, pp. 277-285, 2016.   DOI
2 M. J. Kim, “Research trends in rehabilitation program for disabled applying virtual reality technology in Korea,” The Journal of Digital Convergence, Vol. 13, No. 2, pp. 381-391, 2015.   DOI
3 Ju-Yang Lee & Phil-Sik Jang, “Effects of Message Polarity and Type on Word of Mouth through SNS (Social Network Service),” The Journal of Digital Policy & Management, Vol. 11, No. 6, pp. 129-135, 2013.
4 Y. S. Jeong, Y. T. Kim, G. C. Park, “A Three-dimensional Numerical Weather Model using Power Output Predict of Distributed Power Source,” Journal of Convergence Soceity for SMB, Vol. 6, No. 4, pp. 93-98, 2016.   DOI
5 H. J. Lee, J. S. Han, Y. K. Jeong, I. W. Lee and S. H. Lee, “A Technology of Context-aware based Building Management for Energy Efficiency,” Journal of Convergence Soceity for SMB, Vol. 2, No. 1, pp. 69-75, 2016.
6 C. H. Jin, X. Li, K. I. Kim, M. Y. Hwang, S. Y. Kim, K. D. Kim, K. H. Ryu, “Filtering Method for Analyzing Renewable Energy Stream Data,” Journal of Convergence Soceity for SMB, Vol. 1, No. 1, pp. 39-44, 2011.
7 J. H. Lee, J. U. Cho, “Convergence Technique Study of Model Tie Rod End by Configuration through Simulation Analysis,” Journal of the Korea Convergence Society, Vol. 7, No. 1, pp. 161-166, 2016.   DOI
8 J. H. Lee, J. U. Cho, “Convergence Technique Study through CAE due to the Shape of Lift for Car,” Journal of the Korea Convergence Society, Vol. 6, No. 5, pp. 49-54, 2015.   DOI
9 E. Shellshear, R. Berlin, and J. S. Carlson, “Maximizing Smart Factory Systems by Incrementally Updating Point Clouds,” IEEE Computer Graphics and Applications, Vol. 35, No. 2, pp. 62-69, 2015.   DOI
10 T. S. Jeong, "The Suggestion for Successful Factory Converging Automation by Reviewing Smart Factories In German," Journal of the Korea Convergence Society Vol. 7, No. 1, pp. 189-196, 2016.   DOI
11 http://navercast.naver.com/magazine_contents.nhn?rid=1697&contents_id=30687
12 http://it.donga.com/20408
13 Chuck Hull, Apparatus for Production of Three-Dimensional Objects by Stereolithography, 1986(Pat. No. : US4575330A)
14 J. J. Kim, D. H. Won, J. S. Gook. "Manufacture of Clad Titanium Alloy Artificial Hip Joint by Explosive Welding," Jou. of Korean Soc. of Mechanical Technology, Vol. 16, No. 1, pp. 1075-1082, 2014.   DOI
15 S. M. Hong, J. H.H wang, J. W. Sim, W. J. Chung, M. S. Joun, "Causes of Fracture Occuring in Plate Forging of Clad Plate," Proceedings of the Korean Society for Technology of Plasticity, Vol. 2015, No. 5, pp. 165-168, 2015.
16 J. K Mun, "A Study on the explosive Cladding of Heterogeneous Materials," Hongik University, Ph. D. thesis, 1993.
17 J. B. Lee, D. H. Yang, S. Y. Kim and K. S. Kim, “A Study on Flow Analysis of the Blast Valve for Anti-aircraft Shelter,” J. Korean Soc. Mech. Technol, Vol. 17, No. 5, pp. 1107-1115, 2015.   DOI
18 M. G. Kim, “Impact pressure range and explosion pressure,” Journal of Basic Sciences, Vol. 9, No. 1, pp. 41-65, 1999.
19 J. J. Kim, D. H. Won, J. S. Gook, “Manufacture of Clad Titanium Alloy Artificial Hip Joint by Explosive Welding,” Jou. of Korean Soc. of Mechanical Technology, Vol. 16, No. 1, pp. 1075-1082, 2014.   DOI
20 S. B. Cho, "A Study on The Parameters For Stress Intensity Factors of An Interface Crack in Anisotropic Dissimilar Materials," Symposium, Vol. 11, No. 1, pp. 33-39, 1999.
21 W. D. Callister. Jr, "Materials science and engineering an introduction 6th edition," John and Wiley & Sons, pp. 781-785, 2004.
22 P. Incropera, D. P. Dewiti, "Introduction To Heat Transfer," John Wiley & Sons, Inc. 1993.