Browse > Article
http://dx.doi.org/10.15207/JKCS.2017.8.4.189

The Convergence Design for Stiffness and Structure Advancement of Automotive Body  

Lee, Jeong-Ick (Department of mechanical design, INHA Technical College)
Publication Information
Journal of the Korea Convergence Society / v.8, no.4, 2017 , pp. 189-197 More about this Journal
Abstract
In the design of an automotive structural component, one of the more important tasks for a design engineer is to determine the life of the component and to ensure that the component will not fail prematurely. In order to accomplish this, a design engineer will first use simple section analysis to come up with a section shape in the concept design stage and use more advanced analysis for stress level. At this stage, the analysis should focus on understanding overall behavior in terms of load paths and gross stress levels. A model that is adequate for a stiffness analysis of the structure will usually provide an adequate level of stress information in the design process. To perform a detailed stress analysis, the structure models must have the detailed local areas such as stress concentrations or force(or displacement) distributions. This paper is to present the design considerations for the stress analysis of automotive structure.
Keywords
Convergence design; Stiffness; Structure; Advancement; Life analysis;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 J. Y. Kim, “Mathematical Model for Dynamic Performance Analysis of Multi-Wheel Vehicle,” Journal of the Korea Convergence Society, Vol. 3, No. 4, pp. 35-44, 2012.
2 J. W. Cho, "Structural Safety Analysis on Crack Propagation Compact Tension Specimen," Journal of the Korea Convergence Society, Vol. 5, No, pp. 23-37, 2014.
3 M. J. Kang and U. Kim, "A Study on Structural Durability due to the Configuration of Ripper at Excavator," Journal of the Korea Convergence Society, Vol. 5, No. 2 pp. 13-18, 2014.   DOI
4 G. H. Kim, C, G. Kim, S. M. Chang, H. I. Moon, “Design of Curve Road Detection System by Convergence of Sensor,” Journal of digital Convergence, Vol. 14, No. 8, pp. 253-259, 2016.   DOI
5 Y. S. Byun, J. H. Um and B. H. Kim, “Magnetic Makers-based Autonomous Navigation System for a Personal Rapid Transit(PRT) Vehicle,” Journal of digital Convergence, Vol. 13, No. 1, pp. 297-304, 2015.   DOI
6 K. M. Cho, “Development of Guide and Facility Management App. by using Augmented Reality QR Code,” Journal of digital Convergence, Vol. 12, No. 4, pp. 245-249, 2014.   DOI
7 Y. H. Ahn and J. H. Park, “A Study on Development of Sustainable PLM Framework,” Journal of digital Convergence, Vol. 13, No. 3, pp. 65-73, 2015.   DOI
8 M. S. Yoon, C. B. Cho and K. R. Park, “A Design and Implementation of the Temperature Testing Equipment Malfunction Monitering System using Arduino,” Journal of digital Convergence, Vol. 14, No. 5, pp. 317-323, 2016.   DOI
9 Y. Z. Li, Y. S. Choi, “Design and Implementation of Wearable Device Using Lithum Ploymer consist of Peltier,” Journal of Convergency Society for SMB, Vol. 5, No. 2, pp. 15-20, 2015.
10 H. J. Moon, "Polling Method based on Weight Table for Efficient Monitoring", Journal of Convergency Society for SMB, Vol. 5, No. 4, pp. 5-10, 2015.
11 J. I. Lee, “The Development of Decelerating Motor of Electronic Power Steering,” Journal of the Korea Convergence Society, Vol. 2, No. 2, pp. 27-34, 2011.
12 J. A. Bannantine, J. J. Comer, & J. L. Handrock, Fundamentals of metal fatigue analysis, Prentice-Hall, 1990.
13 M. M. Kamal & J. A. Wolf, Jr. Modern Automotive Structural Analysis, Van Nostrand Reinhold Co., 2012.
14 R. R. Craig, Jr., Structural Dynamics: An introduction to computer methods, John Wiley & Sons, 2007.
15 M.F. Nelson & J. A. Wolf, Jr., "The use of inertia relief to estimate impact loads," SAE Transactions, Vol. 86, Paper No. 770604, pp. 2237-2243, 2013.
16 Y. S. Byun, J. H. Um, R. G. Jeong, B. H. Kim, S. W. Kang, “Magnetic Markers-based Autonomous Navigation System for a Personal Rapid Transit (PRT) Vehicle,” Journal of the Korea Convergence Society, Vol. 13, No. 1, pp. 297-304, 2015.
17 J. B. Ma and J. I. Lee, “Mechanical Characteristic Analysis of Structural Light-Weight Aluminum Foam,” Journal of the Korea Convergence Society, Vol. 2, No. 3, pp. 1-6, 2011.
18 J. I. Lee, “Production of Window Motor Assembly Parts in Automotive Body,” Journal of the Korea Convergence Society, Vol. 3, No. 4, pp. 29-34, 2012.