Browse > Article
http://dx.doi.org/10.7839/ksfc.2015.12.3.001

Robust Control System Design for Robot Motion Regeneration under Disturbance Input  

Dang, Dac-Chi. (Department of Control & Mechanical Engineering, the Graduate School, Pukyong National University)
Kang, C.N. (Department of Mechanical Engineering, Jeju National University)
Kim, Y.B. (Department of Control & Mechanical Engineering, the Graduate School, Pukyong National University)
Publication Information
Journal of Drive and Control / v.12, no.3, 2015 , pp. 1-10 More about this Journal
Abstract
In this paper, the authors propose a method to easily recognize and reproduce the robot motion made by an operator. This method is targets for applications similar to painting and welding, and it is based on a process of that identifies a family of plants, by control design and by conducting an experimental evaluation. In this study, the models and controllers for all joints of 3DOF robot system are obtained individually. And a robust control system for motion control of the individual joints is designed based on $H_{\infty}$ control framework. An experimental comparison is made between the proposed control method and existing PID control method. And the results indicate that the proposed designing method is more efficient and useful than conventional method.
Keywords
Recognition; Regeneration; Robot; Motion Control; Robust Control; Trajectory Tracking;
Citations & Related Records
연도 인용수 순위
  • Reference
1 C. P. Hung and W. G. Liu, 2012, "Intuitive Embedded Teaching System Design for Multi-Jointed Robots", Int. Journal of Advanced Robotic Systems, Vol. 9, 34:2012.   DOI
2 M. Ishii, 1992, "A Robot Teaching Method Using Hyper Card System", Proc. of Robot and Human Communication, pp. 410-412.
3 R. Ikeura, and H. Inooka, 1994, "Manual Control Approach to the Teaching of a Robot Task", IEEE Trans. on Systems, Man and Cybernetics, Vol. 24, No. 9, pp.1339-1346.   DOI
4 M. T. Soylemez, M. Gokasan and S. Bogosyan, 2003, "Position Control of a Single-Link Robot- Arm Using a Multi-Loop PI Controller", Proc. of IEEE Conf. Vol. 2, pp. 1001-1006.
5 M. Jin, J. Lee, P. H. Chang, and C. Choi, 2009, "Practical Non-singular Terminal Sliding-Mode Control of Robot Manipulators for High-Accuracy Tracking Control", IEEE trans on Industrial Electronics, Vol. 56, No. 9, pp. 3593-3601.   DOI
6 C. Chiena and A. Tayebib, 2008, "Further Results on Adaptive Iterative Learning Control of Robot Manipulators", Automatica, Vol. 44, pp. 830-837.   DOI
7 P. Tomei, 1991, "Adaptive PD Controller for Robot Manipulators", IEEE Transactions on Robotics and Automation, Vol. 7, pp. 565-570.   DOI   ScienceOn
8 T. Sun, H. Pei, Y. Pan, H. Zhou, and C. Zhang, 2011, "Neural Network-based Sliding Mode Adaptive Control for Robot Manipulators", Neuron Computing, Vol. 74, pp. 2377-2384.
9 R. J. Wai and P. C. Chen, 2006, "Robust Neural-Fuzzy-Network Control for Robot Manipulator Including Actuator" IEEE Trans. on Industrial Electronic, Vol. 53, pp. 1328-1349.   DOI
10 J. Swevers, W. Verdonck and J. De Schutter, 2007 "Dynamic Model Identification for Industrial Robots", IEEE Trans on Control System, Vol. 27, Issue 5, pp. 58-71.
11 N. A Bompos, P. K Artemiadis, A. S Oikonomopoulos and K. J Kyriakopoulos, 2007, "Modeling, Full Identification and Control of the Mitsubishi PA-10 Robot Arm", Int. Conference on Advanced Intelligent Mechatronics, pp. 1-6.
12 E. J. Adam and E. D. Guestrin, 2002, "Identification and Robust Control of an Experimental Servo Motor", ISA Trans., Vol. 41, Issue 2, pp. 225-234.   DOI
13 V. A. Oliveira, E. S. Tognetti and Daniel Siqueira, 2006, "Robust Controllers Enhanced with Design and Implementation Processes", IEEE Trans. Educ., Vol. 49, No. 3, pp. 370-382.   DOI
14 R. Y. Chiang and M. G. Safonov, 1996, "Robust Control Toolbox User's Guide", Natick, MA: The MathWorks Inc.
15 Gu D. W., Petrov P. H. and Konstantinov M. M, 2005, "Robust Control Design with Matlab", Springer.