1 |
Cheng, M. and Hung, K. C., "Vortex Structure of Steady Flow in a Rectangular Cavity", Computers and Fluids, Vol.35, No.10, pp.1046-1062, 2006.
DOI
ScienceOn
|
2 |
Brizmer, V., Kligerman, Y. and Etsion, I., "A Laser Surface Textured Parallel Thrust Bearing", Tribology Trans., Vol.46, pp.397-403, 2003.
DOI
ScienceOn
|
3 |
Etsion, I., "State of the Art in Laser Surface Texturing", J. of Tribology, Vol.127, pp.248-253, 2005.
DOI
ScienceOn
|
4 |
Feldman, Y., Kligerman, Y., Etsion, I. and Haber, S., "The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces," J. of Tribology, Vol. 128, pp. 250-345, 2006.
|
5 |
박태조, 황윤건, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제1보 - 딤플 깊이의 영향", 한국 윤활학회지, Vol.25, No.5, pp305-310, 2009.
|
6 |
박태조, 황윤건, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제2보 - 딤플 위치의 영향", 한국윤활학회지, Vol.26, No.1, pp.1-6, 2010.
과학기술학회마을
|
7 |
박태조, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제3보 - 딤플 수의 영향", 한국 윤활학회지, Vol.27, No.6, pp.302-307, 2011.
과학기술학회마을
DOI
ScienceOn
|
8 |
박태조, "Laser Texturing한 평행 스러스트 베어링의 윤활특성 : 제4보 - 딤플 형상의 영향", 한국윤활학회지, Vol.27, No.6, pp.338-343, 2011.
과학기술학회마을
DOI
ScienceOn
|
9 |
이준오, 박태조, "표면조직 가공한 유압부품면에서의 윤활특성", 유공압건설기계학회 논문집, Vol.9, No.4, pp.26-31, 2012.
과학기술학회마을
DOI
ScienceOn
|
10 |
Dowson, D., History of Tribology, Professional Engineering Publishing, 1998.
|
11 |
Reynolds, O., "On the Theory of Lubrication and Its Application to Mr. Beauchamp Tower's Experiments, Including an Experimental Determination of the Viscosity of Olive Oil", Philos. Trans. R. Soc. London, Vol.177, pp. 157-234, 1886.
DOI
|
12 |
Hamrock, B., Fundamentals of Fluid Film Lubrication, McGraw-Hill, 1994.
|
13 |
Meritt, H. E., Hydraulic Control Systems, John Wiley & Sons, 1967.
|
14 |
Sweeney, D. C., "Preliminary Investigation of Hydraulic Lock", Engineering, Vol.172, pp.513-516, 1951.
|
15 |
Manhajm, J. and Sweeney, D. C., "An Investigation of Hydraulic Lock", Proc. of Instn. Mech. Engrs., Vol.169, pp.865-879, 1955.
DOI
|
16 |
Mannam, J., "Further Aspects of Hydraulic Lock", Proc. of Instn. Mech. Engrs., Vol.173, pp.699-716, 1959.
DOI
|
17 |
Sweeney, D. C.,, "Eight Ways to Overcome Hydraulic Lock", Engineering, Vol.190, pp.592-593, 1960.
|
18 |
Kettleborough, C. F., "The Effect of Pressure on Viscosity in Hydraulic Lock", Int. J. Mech. Sci., Vol.3, pp.137-142. 1961.
DOI
ScienceOn
|
19 |
Hessey, M. F., Martin, B. P. and Brighton, D. K., "Hydraulic Lock Forces on Tapered Pistons", Proc. Instn. Mech. Engrs., Vol.184, pp.983-992, 1969-1970.
|
20 |
Etsion, I. and Pinkus, O., "The Hydrodynamics of a Plug Bearing", Trans. ASME, J. of Lub. Tech., Vol.98, pp.433-440, 1976.
DOI
|
21 |
Meikandan, N., Raman, R., Singaperumal, M. and Seetharamu, K. N., "Theoretical Analysis of Tapered Pistons in High Speed Hydraulic Actuators", Wear, Vol.137, pp.299-321, 1990.
DOI
ScienceOn
|
22 |
Lee, C. O. und Park, T. J., "Querkrafte an hydraulischen Ventilen mit mehreren Umfangsnuten", Olhydraulik und Pneumatik, Vol.34, pp.269-274, 1990.
|
23 |
이정오, 박태조, 피스톤 형상이 유압피스톤 펌프.모터의 윤활특성에 미치는 영향, 한국윤활학회지, Vol.10, No.3, pp.47-53, 1994.
|
24 |
박태조, 이정오, "그루브를 한 유압 피스톤펌프의 피스톤에 작용하는 측력의 해석", 한국윤활학회지, Vol.8, No.8, pp.44-49, 1992.
|
25 |
Sasaki, A. and Yamamoto, T., "Review of Studies of Hydraulic Lock", Lubrication Engineering, Vol.49, pp.585-593, 1993.
|
26 |
Park, T. J. and Lee, C. O., "Hydrodynamic Lateral Force on a Tapered Piston Subjected to a Large Pressure Gradient", Proc. of 3rd ICFP, pp.44-48, 1993.
|
27 |
Borghi, M., Cantore, G., Milani, M. and Paoluzzi, R., "Numerical Analysis of the Lateral Forces Acting on Spools of Hydraulic Components", Proc. of ASME, Int. Mech. Eng. Congress and Expo., Vol.5, pp.149-156, 1998.
|
28 |
Milani, M., "Designing Hydraulic Locking Balancing Grooves", Proc. of Instn. Mech. Engrs., J. of Systems and Control Eng., Vol.215, pp.453-465, 2001.
|
29 |
Belforte, G., Raparelli, T., Mazza, L. and Trivella, A., "Analysis, Design, and Comparison of Different Types of Pistons for Sealless Pneumatic Cylinders and Valves", Tribology Trans., Vol.48, No.3, pp.377-388, 2005.
DOI
ScienceOn
|
30 |
Borghi, M., "Hydraulic Locking-in Spool- Type Valves : Tapered Clearances Analysis", Proc. of Instn. Mech. Engrs., J. of Systems and Control Eng., Vol.215, pp.157-168, 2001.
|
31 |
박태조, "압력에 따른 점도변화가 그루브를 한 유압 스푸울 밸브에 미치는 영향", 한국윤활학회지, Vol.22, No.6, pp.307-313, 2006.
과학기술학회마을
|
32 |
FLUENT, FLUENT 6.0 Manual, 2002.
|
33 |
Moffatt, H. K., "Viscous and Resistive Eddies near a Sharp Corner", J. Fluid Mech., Vol.18, pp.1-18, 1964.
DOI
|