Browse > Article
http://dx.doi.org/10.12656/jksht.2016.29.2.66

Effects on the Joining Condition of TiAl Alloy and SCM440 by Servo Motor Type Friction Welding  

Park, Jong-Moon (School of Materials Science and Engineering, Kumoh National Institute of Technology)
Kim, Ki-Young (School of Materials Science and Engineering, Kumoh National Institute of Technology)
Kim, Kyoung-Kyun (Asan Friction Welding Co., Ltd.)
Oh, Myung-Hoon (School of Materials Science and Engineering, Kumoh National Institute of Technology)
Publication Information
Journal of the Korean Society for Heat Treatment / v.29, no.2, 2016 , pp. 66-74 More about this Journal
Abstract
In this study, characteristics of TiAl alloy and SCM440 (Cr-Mo steel) have been investigated with the various joining condition by servo motor type friction welder. The experimental factors of friction welder used in this study are spindle revolution, friction speed, and distance, upset speed and distance, respectively. Servo motor type friction welder could be controlled by the level of oil pressure, and it could be performed by position control dependence of electrical energy. Mechanical properties and morphology of welded interface were characterized by various joining condition. This aroused due to the bond strength dependence on friction heat and size of the heat affected zone. Therefore, it is necessary to have enough friction heat and decreased heat affected zone for good friction welding between dissimilar metals. An optimum bond was obtained between TiAl alloy and SCM440 by controlling friction speed and distance. At the spindle revolution 4,000 rpm, friction speed 120 mm/min, friction distance 15 mm, the bond strength was found to be 312 MPa.
Keywords
TiAl alloy; SCM440; Servo-motor type friction welding; Joining factors;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 M. H. Oh, S. H. Hwang, S. N. Choi, I. S. Kim and S. J. Kim : J. Advanced Materials (KNUT). 2 (1995) 7.
2 T. Noda : Intermetallics. 6 (1998) 709.   DOI
3 P. He, J. C. Feng, B. G. Zhang and Y. Y. Qian : Materials Characterization. 48 (2002) 401.   DOI
4 G. X. Luo, G. Q. Wu, Z. Huang and Z. J. Ruan : Scripta Materialia. 57 (2007) 521.   DOI
5 H. Li, H. Wei, P. He, T. Lin, J. Feng and Y. Huang : Intermetallics. 34 (2013) 69.   DOI
6 T. Noda, T. Shimizu, M. Okabe and T. MIikubo : Materials Science and Engineering. A239-240 (1997) 613.
7 W. B. Lee, Y. J. Kim and S. B. Jung : Intermetallics. 12 (2004) 671.   DOI
8 R. Kumar and M. Balasubramanian : Defence Technology. 11 (2015) 65.   DOI
9 이영호, 이규천, 최신접합공학, 인터비전 (2008) 77.
10 S. T. Selvanmani, K. Palanikumar, K. Umanath and D. Jayaperumal : Materials and Design. 65 (2015) 652.   DOI
11 P. Li, J. Li, M. Salman, L. Liang, J. Xiong and F. Zhang : Materials and Design 56 (2014) 649.   DOI
12 M. Hazra, K. S. Rao and G. M. Reddy : J. Materials technol 3(1) (2014) 90.   DOI
13 H. G. Dong, L. Z. Yu, H. M. Gao, D. W. Deng, W. L. Zhou and C. Dong : Trans. Nonferrous Met. Soc. China 24 (2014) 3126.   DOI
14 Y. S. Kong and S. J. Kim : J. of the Korean Society of Mechanical Engineers, 30(4) (2006) 402.   DOI
15 K. S. Koo : J. of the Korean Society of Manufacturing Technology Engineers 21(6) (2012) 932.   DOI
16 M. Takuya and H. Haruki : J. Japan Inst. Matals, 58(2) 1994 215.   DOI
17 W. B. Lee, M. G. Kim and J. M. Koo : J. of Materials Science 39 (2004) 1125.   DOI
18 Y. T. Lee, H. D. Lee and S. K. Oh : J of Korean Welding and Joining Society 1 (1995) 110.
19 S. G. Lee, B. H. Min, S. H. Choi, D. K. Shim and T. K. Min : J of Korean Welding and Joining Society, 25(6) (2007) 53.   DOI
20 M. Karadge, M. Preuss, C. Lovell, P. J. Withers and S. Bray : Materials Science and Engineering A 459 (2007) 182.   DOI
21 M. B. Uday and M. N. Ahmad-Fauzi : Materilals and Design. 59 (2014) 76.   DOI
22 H. Cho and S. Suh : J of Korean Welding and Joining Society, 15(6) (1997) 78.
23 Y. C. Kim and J. U. Park : J of Korean Welding and Joining Society, 18(5) (2000) 84.
24 L. Zhou, H. J. Liu and Q. W. Liu : Materials and Design 31 (2010) 2631.   DOI
25 S. Celik and I. Ersozlu : Materials and Design. 30 (2009) 970.   DOI