Browse > Article
http://dx.doi.org/10.12656/jksht.2014.27.2.65

A Study on Tribological Characteristics of Powder Sintered Fe-base Alloy (SMF9060)  

Kim, Sang Youn (Department of Nano Fusion Technology, Pusan National University)
Kim, Dae Wook (Department of Nano Fusion Technology, Pusan National University)
Park, Yeong Min (Department of Nano Fusion Technology, Pusan National University)
Shin, Dong Chul (Department of Mechanical Engineering, Koje College)
Kim, Tae Gyu (Department of Nanomechatronics Engineering, Pusan National University)
Publication Information
Journal of the Korean Society for Heat Treatment / v.27, no.2, 2014 , pp. 65-71 More about this Journal
Abstract
SMF9060 material is a Fe-based powder sintered alloy that is used for several automobile components such as Synchronize Hub, oil pump and transmission. These components are required excellent wear resistance and durability. In this study, we have performed a dry wear test at the ambient air and Ar gas conditions in the room temperature, and a lubricant wear test at the room temperature and engine oil temperature of $100^{\circ}C$. The amount of wear volume and coefficient friction are measured by a Profilometer and a Ball on disk type wear tester. The wear volume in Ar gas condition was a little higher than that in the ambient air condition. However the wear volume in the lubricant wear condition was much lower than in the dry wear condition. XRD analysis of the debris in Ar gas condition showed that the oxide film was not formed.
Keywords
SMF9060 material; Wear test; Ball on disk type wear test; Profilometer; XRD;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 T. Hisakado and K. Akiyama : Wear, 224 (1999) 274-281.   DOI
2 K. W. Park, Y. H. Han and S. Y. Lee : KSHT 9 (1996) 271-280.
3 M. K. Kim, B. H. Jung, H. S. Park, B. C. Lee, S. H. Shin and J. S. Lee : KSHT 12 (1999) 166-173.
4 Kazuhisa Miyoshi : Tribology International, 32(1999) 605-616.   DOI
5 Terumasa Hisakado and Hideyuki Tani : Wear, 224 (1999) 165-172.   DOI
6 Naofumi Hiraoka : Wear, 249 (2001) 1014-1020.   DOI
7 Zuomin Liu : Wear 262 (2007) 600-606.   DOI
8 M. M. Yazdanian : Surface and Coatings Technology 202 (2007) 1182-1188.   DOI
9 S. Dhanasekaran and R. Gnanamoorthy : Wear 262 (2007) 617-623.   DOI
10 T Hisakado and N Hashizume : Wear, 237 (2000) 98-106.   DOI
11 김태현, 김상윤, 김태규, 한국기계가공학회지, 11 (2012) 139-144.