Browse > Article
http://dx.doi.org/10.12656/jksht.2013.26.2.66

Fabrication of Carbon Fiber/Aluminum Preforms using Cylindrical Sputtering System  

Kim, Y.C. (Korea Institute of Science and Technology Information, Reseat Program)
Han, C.S. (Dept. of Defense Science & Technology, Hoseo University)
Publication Information
Journal of the Korean Society for Heat Treatment / v.26, no.2, 2013 , pp. 66-71 More about this Journal
Abstract
The purpose of this study is to prepare a high-strength Fiberglass Reinforced Metal (FRM). Aluminum covering over carbon fibers (CF) was made to increase their wettability to molten aluminum. A cylindrical sputtering apparatus was used for the covering. One tow of carbon fibers was placed along the central axis of the cylindrical target. Aluminum was uniformly coated around the carbon fiber tow. But in case of CF without sizing treatment, aluminum spread into the inside of the tow. Preforms of carbon fiber/aluminum composite were made by impregnating carbon fiber with molten aluminum. Contact angle of molten aluminum to the aluminum-coated carbon fiber was about $30^{\circ}$. The fractured section of preform was observed by SEM, which showed that molten aluminum wetted the outer part of the tow well but had not penetrated into the center, and that adhesion between CF and aluminum matrix was in good condition.
Keywords
Fiberglass Reinforced Metal; Composite Preforms; Wettability; Sputtering;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 R. Kalfat and R. Al-Mahaidi : Composite structures, 92 (2010) 2738.   DOI   ScienceOn
2 E. L. Rodriguez : J. Mater. Sci. Lett., 8 (1989) 116.   DOI
3 T. A. Ranney and L. V. Parker : Ground water monitoring & remediation, 18 (1998) 127.   DOI   ScienceOn
4 V. Caccese, J. P. Kabche, and K. A. Berube : Composite Structures, 81 (2007) 450.   DOI   ScienceOn
5 T. R. Guess, E. D. Reedy, and A. M. Slavin : J. Compo. Tech. & Res., 17 (1995) 117.   DOI   ScienceOn
6 A. B. Morgan, N. A. Gagliardi, and W. A. Price : Fire & Materials, 33 (2009) 323.   DOI   ScienceOn
7 鹽田一路 : 工業材料, 31 (1983) 27.
8 S. Shimada, M. Takahashi, and J. Tsujino : Surf. & Coat. Tech., 201 (2007) 7194.   DOI   ScienceOn
9 H. Holzschuh : Thin solid films, 469/470 (2004) 92.   DOI   ScienceOn
10 J. Tsujino, K. Tsuda, and I. Yamazaki : Inter. Conf. Euro. Ceramic Soc., (2008) 1179.
11 A. Hiroshi and O. Akimitsu : J. Jap. Ins. Met., 48 (1984) 1119.   DOI
12 A. Liu, M. Guo, and J. Gao : Surf. & Coat. Tech., 201 (2006) 2696.   DOI   ScienceOn
13 C. S. Oh and C. S. Han : J. Kor. Soc. Heat. Treat., 25 (2012) 1.   DOI   ScienceOn
14 北原 晃 : 工業材料, 33 (1985) 66.
15 益田森治, 室田忠雄 : 工業塑性力學 (養賢堂), (1975)
16 S. Ochiai and M. Hojo : J. Jpn. Soc. Powder & Powder Metall., 45 (1998) 302.   DOI
17 K. Y. Rhee, M. K. Shin, and N. S. Choi : J. Adh. Sci. & Tech., 17 (2003) 1619.   DOI   ScienceOn
18 J. Fujimoto and T. Tamura : Adv. Compo. Mat., 7 (1998) 365.   DOI   ScienceOn
19 K. Ogi and N. Takeda : Adv. Compo. Mat., 6 (1997) 175   DOI   ScienceOn
20 R. H. Martin and G. N. Sage : Composite structures, 6 (1986) 141.   DOI   ScienceOn