Browse > Article
http://dx.doi.org/10.12656/jksht.2012.25.1.014

Cutting Chip Forms on the Cutting Condition and Tempering Temperatures of Lead-free Brass  

Joo, Y.S. (Dept. of Metallurgical Engineering, Pukyong National University)
Lee, S.B. (Essentech Co. Ltd.)
Kim, S.Y. (Dept. of Mechanical Engineering, Pukyong National University)
Joo, C.S. (Dept. of Chemical Engineering, Pukyong National University)
Jung, B.H (Dept. of Metallurgical Engineering, Pukyong National University)
Publication Information
Journal of the Korean Society for Heat Treatment / v.25, no.1, 2012 , pp. 14-21 More about this Journal
Abstract
The effects of cutting condition and tempering temperature for the shape of cutting chip were investigated. For this purpose, a lead-free brass containing 1wt.% of Bi extruded at $750^{\circ}C$ in straight turning was used in this study. The cutting chip preferred was mainly found to be loose form of arc chips with curling discontinuity, and these were formed by shear fracture. However, some of fragmental element chip were found to be mixed when tempering temperature was as high as $500^{\circ}C$. The form and size of chip was more affected by feed rate than by tempering temperature and cutting rate. In addition, the cutting surface was observed to be formed more rough in the case of high feed rate and low cutting rate compared to low feed rate and high cutting rate.
Keywords
Lead-free brass; Cutting chip; Cutting condition; Tempering; Loose arc chip;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 鄭承富, 森搏太郞 等 : J. of the JCBRA, 33 (1994) 132-139.
2 Hisakimi Notoya et al. : J. of the JCBRA, 39 (2000) 121-127.
3 日本伸銅協會(JCBA) : 伸銅品 デ-タ ブック (2009) 255-264.
4 Ryoji Murata et al. : J. of the JCBRA, 11 (1972) 70-77.
5 Tetsuya Ando et al. : J. of the JCBRA, 40 (2001) 253-256.
6 John T. Plews et al. : Advanced Materials & Processes, 10 (1991) 23-27.
7 W. Rosenhain et al. : Engineering, Jan., 30 (1952) 151.
8 D. W Yeon et al. : J. of the KSPE, 11 (1994) 42-49.
9 Zsolt János et al. : Proceedings, XVII IMEKO World Congress (2003) 1469.
10 K. Nakayama : Machining Science and Technology, 1 (1997) 251-262.   DOI
11 Y. S. Joo et al. : J. of the KSHT, 24 (2011) 133-139.
12 Masami Somekawa et al. : 神戶製鋼技報, 51 (2001) 1-16.
13 서남섭 : 절삭가공학, 동명사 (1988) 1-400.
14 C. Vilarino et al. : Materials Processing Technology, 170 (2005) 441-447.   DOI
15 G. Pantazopoulos : Materials Engineering and Performance, 11 (2002) 402-407.   DOI