Browse > Article
http://dx.doi.org/10.5293/IJFMS.2016.9.4.313

Centrifugal Impeller Blade Shape Optimization Through Numerical Modeling  

Bellary, Sayed Ahmed Imran (Department of Mechanical Engineering, ADCET Ashta, Shivaji University Kolhapur)
Samad, Abdus (Indian Institute of Technology Madras)
Publication Information
International Journal of Fluid Machinery and Systems / v.9, no.4, 2016 , pp. 313-324 More about this Journal
Abstract
Surrogate model based shape optimization methodology to enhance performance of a centrifugal pump has been implemented in this work. Design variables, such as blade number and blade angles defining the pump impeller blade shape were selected and a three-level full factorial design approach was used for efficiency enhancement. A three-dimensional simulation using Reynolds-averaged Navier Stokes (RANS) equations for the performance analysis was carried out after designing the geometries of the impellers at the design points. Standard $k-{\varepsilon}$ turbulence model was used for steady incompressible flow simulations. The optimized impeller incurred lower losses by shifting the trailing edge towards the impeller pressure side. It is observed that the surrogates are problem dependent and most accurate surrogate does not deliver the best design always.
Keywords
Centrifugal impeller; Optimal design; Blade number; Blade angles; Multiple Surrogate models; Hydraulic efficiency;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Murakami, M., Kikuyama, K., and Asakura, E., 1980, "Velocity and Pressure Distributions in the Impeller Passages of Centrifugal Pump," ASME J. of Fluids Eng., Vol. 102, No. 4, pp. 420-426.   DOI
2 Houlin, L., Yong, W., Shouqi, Y., Minggao, T., and Kai, W., 2010, "Effects of Blade Number on Characteristics of Centrifugal Pumps," Chinese Journalof Mechanical Engineering, Vol. 23, pp. 1-6.   DOI
3 Feng, J., Benra, F. K., and Dohmen, H. J., 2007, "Numerical Investigation on Pressure Fluctuations for Different Configurations of Vaned Diffuser Pumps," International Journal of Rotating Machinery, Volume 2007, Article ID 34752,10pages.doi:10.1155/2007/34752.   DOI
4 Rababa, K. S., 2011, "The Effect of Blades Number and Shape on the Operating Characteristics of Groundwater Centrifugal Pumps," European Journal of Scientific Research, ISSN 1450-216X, Vol.52, No. 2, pp. 243-251.
5 Sanda, B., and Daniela, C. V., 2012, The Influence of the Inlet Angle Over the Radial Impeller Geometry Design Approach with Ansys, Journal of Engineering Studies and Research, Vol. 18, No. 4, pp. 32-39.
6 Luo, X., Zhang, Y., Peng, L., Xu, H., and Yu, W., 2008, Impeller Inlet Geometry Effect on Performance Improvement for Centrifugal Pumps, Journal of Mechanical Science and Technology, Vol. 22, pp. 1971-1976.   DOI
7 Liu, C. H., Vafidis, C., and Whitelaw, J. H., 1994, "Flow Characteristics of a Centrifugal Pump," ASME Journal of Fluids Eng., Vol. 116, No. 2, pp. 303-309.   DOI
8 Varley, F. A., 1961, "Effects of Impeller Design and Surface Roughness on the Performance of Centrifugal Pumps," Proc. Instn. Mech. Engrs, Vol. 175, No. 21, pp. 955-969.   DOI
9 Goel, T., Haftka, R. T., Shyy, W. and Queipo, N., 2007, "Ensemble of Surrogates," Structural and Multidisciplinary Optimization," Vol. 33, No. 3, pp. 199-216.   DOI
10 Li, W. G., 2002, "The Influence of Number of Blades on the Performance of Centrifugal Oil Pumps," World Pumps, Vol. 427, pp. 32-35.
11 Samad, A., 2008, "Numerical Optimization of Turbomachinery Blade Using Surrogate Models," PhD Thesis, School of Mechanical Engineering, Inha University, Republic of Korea.
12 Derakhshan, S., Pourmahdavi, M., Abdolahnejad, E., Reihani, A. and Ojaghi, A., 2013, "Numerical Shape Optimization of a Centrifugal Pump Impeller Using Artificial Bee Colony Algorithm," International Journal of Computers & Fluids, Vol. 81, pp. 145-151.   DOI
13 Ansys-CFX 13.0, 2010, Ansys Inc.
14 Lazarkiewicz, S., and Troskolanski, A. T., 1965, Impeller Pumps, 1st Edition., Pergamon Press Ltd., Oxford.
15 Bellary, S. A. I., and Samad, A., 2015, Numerical Analysis of Centrifugal Impeller for Different Viscous Liquids, International Journal of Fluid Machinery and Systems, Vol. 8, No. 1, DOI: http://dx.doi.org/10.5293/IJFMS.2014.12.26.00033.
16 Wilcox, D. C., 1994, Turbulence Modeling for CFD, DCW Industries, Inc., 2nd Edition, La Canada, California.
17 Srinivasan, K. M., 2008, Rotodynamic Pumps, New Age International (P) Ltd., New Delhi.
18 Stepanoff, A. J., 1964, Centrifugal and Axial Flow Pumps, 2nd Edition., John Wiley and Sons inc., New York.
19 Fard, M. H. S., and Boyaghchi, F. A., 2007, "Studies on the Influence of Various Blade Outlet Angles in a Centrifugal Pump When Handling Viscous Fluids," American Journal of Applied Sciences, Vol. 4, No. 9, pp. 718-724.   DOI
20 Aoki, K., Ohta, H., and Nakayama, Y., 1987, "Study on Centrifugal Pump for High Viscosity Liquids (The 1st Report, Effect of Impeller Output Angle and Number of Blades on the Pump Performance of Closed Type Impellers)," Proceedings of the School of Engineering, Tokai University, Vol. 27, No. 2, pp. 151-158.
21 Samad, A., and Kim, K. Y., 2009, "Application of Surrogate Modeling to Design of a Compressor Blade to Optimize Stacking and Thickness," International Journal of Fluid Machinery and Systems, Vol. 2, No. 1, pp. 1-12.   DOI
22 Gupta, M., Kumar, S., and Kumar, A., 2011, "Numerical Study of Pressure and Velocity Distribution Analysis of Centrifugal Pump," International Journal of Thermal Technologies, Vol.1, No.1, pp. 117-121.
23 Bellary, S. A. I., Husain, A., and Samad, A., 2014, "Effectiveness of Meta-models for Multi-objective Optimization of Centrifugal Impeller," Journal of Mechanical Science and Technology, Vol. 28, No. 12, pp. 4947-4957.   DOI
24 Samad, A., and Nizamuddin, M., 2013, "Flow Analyses inside Jet Pump used for Oil Wells," International Journal of Fluid Machinery and Systems, Vol. 6, No. 1, pp. 1-10.   DOI
25 Bradshaw, P., 1996, "Turbulence Modeling with Application to Turbomachinery," Progress in Aerospace Sciences, Vol. 32, No. 6, pp. 575-624.   DOI
26 Samad, A., Kim, K. Y., Goel, T., Haftka, R. T., and Shyy, W., 2008, "Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization," Journal of Propulsion and Power, Vol. 24, No. 2, pp. 302-310.   DOI
27 Gulich, J. F., 2010, Centrifugal Pumps, 2nd Edition., Springer Publications, Berlin.
28 Zhou, W., Zhao, Z., Lee, T. S., and Winoto, S. H., 2003, "Investigation of Flow through Centrifugal Pump Impellers using Computational Fluid Dynamics," International Journal of Rotating Machinery, Vol. 9, No. 1, pp. 49-61.   DOI
29 Zhang, Y., Zhou, X., Ji, Z., and Jiang, C., "Numerical Design and Performance Prediction of Low Specific Speed Centrifugal Pump Impeller," International Journal of Fluid Machinery and Systems, Vol. 4, No. 1, pp. 133-139.   DOI
30 Kamimoto, G., and Matsuoka, Y., 1956, "On the Flow in the Impeller of Centrifugal Type Hydraulic Machinery (The 2nd Report)," Transactions of the JSME, Series 3, Vol. 22, No. 113, pp. 55-59.   DOI