The Effect of Pump Intake Leaning Angle and Flow Rate on the Internal Flow of Pump Sump |
Lee, Youngbum
(Graduate School of Knowledge-based Technology and Energy, Department of Mechanical System Engineering, Korea Polytechnic University)
Kim, Kyung-Yup (Department of Mechanical Engineering, Korea Polytechnic University) Chen, Zhenmu (Graduate School, Department of Mechanical Engineering, Mokpo National University) Choi, Young-Do (Department of Mechanical Engineering, Institute of New and Renewable Energy Technology Research, Mokpo National University) |
1 | Japan Association of Agricultural Engineering Enterprise, 1991, Pumping Station Engineering Handbook, Japan. |
2 | Nagura, T., Shintani, A., Kawaguchi, R., Inagaki, K., Maeda, T., and Hirata, K., 2015, "On Measurements of Complicated Flow Structure in a Suction Sump Using the 3D-PTV and the UVP," Proceeding of the 13th Asian International Conference on Fluid Machinery, Tokyo, Japan. |
3 | Li, S., Silve, J. M., Lai, Y., Weber, L. J., and Patel, V. C., 2006, "Three-dimensional Simulation of Flows in Practical Water-pump Intakes," Journal of Hydroinformatics, Vol. 8, No. 2, pp. 111-124. |
4 | Ansar, M. and Nakato, T., 2001, "Experimental Study of 3D Pumpintake Flows with and without Cross Flow," Journal of Hydraulic Engineering, Vol. 127, No. 10, pp. 825-834. DOI |
5 | Turbomachinery Society of Japan, 2005, Standard Method for Model Testing the Performance of a Pump Sump, TSJ S002. |
6 | ANSYS Inc., 2012, ANSYS CFX Documentation,ver. 13, http://www.ansys.com. |
7 | Matsui, J., Sugino, Y., and Kawakita, K., 2014, "Numerical Simulation on Flow in Pump Sump with Free Surface," In Fluid Machinery and Fluid Engineering, 2014 ISFMFE-6th International Symposium on (pp. 1-5). IET. |
8 | Menter, F. R., Kuntz, M., and Langtry, R., 2003, "Ten Years of Industrial Experience with the SST Turbulence Model," Turbulence, Heat and Mass Yransfer, Vol. 4, No. 1, pp. 625-632. |