Browse > Article
http://dx.doi.org/10.5293/kfma..2011.14.6.068

Changes in Performance and Operating Condition of a Gas Turbine Combined Heat and Power System by Steam Injection - A Focus on Compressor Operation  

Kang, Soo-Young (인하대학교 대학원)
Kim, Tong-Seop (인하대학교 기계공학부)
Publication Information
The KSFM Journal of Fluid Machinery / v.14, no.6, 2011 , pp. 68-75 More about this Journal
Abstract
This study simulated the effect of steam injection on the performance and operation of a gas turbine combined heat and power (CHP) system. A commercial simple cycle gas turbine was analyzed. A full off-design analysis was carried out to investigate the variations in not only engine performance but also the operating characteristics of the compressor caused by steam injection. Variation in engine performance and operation characteristics according to various operation modes were examined. First, the impact of full steam injection was investigated. Then, operations aiming to guarantee a minimum compressor surge margin, such as under-firing and partial steam injection, were investigated. The former and latter were turned out to be relatively superior to each other in terms of power and efficiency, respectively.
Keywords
Gas turbine; Steam injection; Off-design; Surge margin; Under-firing; FSTIG; PSTIG;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Srinivas, T., Gupta, V.S.S.K.S. A., Reddy, B. V., 2008, "Sensitivity analysis of STIG based combined cycle with dual pressure HRSG," International journal of thermal sciences, Vol. 47, pp. 1226-1234.   DOI
2 Lee, J. J., Jeon, M. S., Kim, T. S., 2010, "The influence of water and steam injection on the performance of a recuperated cycle microturbine for combined heat and power application," Applied energy, Vol. 87, pp. 1307-1316.   DOI
3 Enter Software. GateCycle ver 6.0, 2006.
4 Kim, Y. S., Lee, J. J., Kim, T. S., Sohn, J. L., 2011, "Effects of syngas type on the operation and performance of a gas turbine in integrated gasification combined cycle," Energy Conversion and Management, Vol. 52, Issue 5, pp. 2262-2271.   DOI   ScienceOn
5 Erbes, M. R., Gay. R. R., 1989, "Gate/Cycle predictions of the off-design performance of combined-cycle power plants," ASME Winter Annual Meeting, Vol. 124, pp. 43-51.
6 http://mysolar.cat.com/cda/files/304496/7/ds65gs.pdf
7 Rocha, G., Reynolds, S., Brown, T., 2008, "Introduction of the TaurusTM65 industrial gas turbine for power generation," GT2008-51328.
8 Ganapathy, V., 1985, "Heat-recovery boiler design for cogeneration," Oil & Gas Journal, pp. 116-125.
9 Kehlhofer, R., 1978, "Calculation for part-load operation of combined gas/steam turbine plants," Brown Boveri Rev, Vol. 65, No. 10, pp. 672-679.
10 Proietti, S., Arcioni, L. and Desideri, U., 2006, "Implementation of a system for the analysis and evaluation of advantages of distributed generation," ASME paper 2006, GT2006-90765, pp. 807-815.
11 Jonsson, M., Yan, J., 2005, "Humidified gas turbines-a review of proposed and implemented cycles," Energy, Vol. 30, Issue 7, pp. 1013-1078.   DOI
12 Paepe, De M., Dick, E., 2000, "Cycle improvements to steam injected gas turbines," International journal of energy research, Vol. 24, pp. 1081-1107.   DOI
13 Bolland, O., Stadaas, J. F., 1995, "Comparative evaluation of combined cycles and gas turbine systems with water injection, steam injection, and recuperation," Transactions of the ASME, Vol. 117, No. 1, pp. 138-145.   DOI
14 Rice, I. G., 1995, "Steam-injected gas turbine analysis: steam rates," Journal of engineering for gas turbines and power, Vol. 117, pp. 347-353.   DOI
15 Kim, T. S., Cho, M. K., Ro, S. T., Kauh, S. K., 1997, "Analysis of small steam injected gas turbine system with heat recovery," Trans. of the KSME(B), Vol. 21, No. 8, pp. 996-1008.   과학기술학회마을
16 Fischer, A. C., Frutschi, H. U., Haselbacher, H., 2001, "Augmentation of gas turbine power output by steam injection," ASME paper, 2001-GT-0107.
17 Yadav, R., Kumar, P., 2003, "Comparative thermodynamic analysis of combined and steam injected gas turbine cycles," IJPGC2003-40118, pp. 531∼537.
18 Bouam, A., Aissani, S., Kadi, R., 2008, "Combustion chamber steam injection for gas turbine performance improvement during high ambient temperature operations," Journal of engineering for gas turbine and power, Vol. 130, No. 4, pp. 1-10.