1 |
Moore, F. K. and Greitzer, E. M., 1986, "A Theory of Post-Stall Transients in Axial Compression Systems: Part 1 - Development of Equations," J. Engineering for Gas Turbines and Power, Vol. 108, pp. 68-76
DOI
|
2 |
Mailach, R. and Vogeler, K., 2007, "Unsteady Aerodynamic Blade Excitation at the Stability Limit and During Rotating Stall in an Axial Compressor," ASME J. Turbomachinery, Vol. 129, No. 3, pp. 503-511
DOI
|
3 |
Emmons, H. W., Pearson, C. E. and Grant, H. P., 1955, "Compressor Surge and Stall Propagation," ASME Transactions, Vol. 77, pp. 455-469
|
4 |
McDougall, N. M., Cumpsty, N. A. and Hynes, T. P., 1990, "Stall Inception in Axial Compressors, " J. Turbomachinery, Vol. 112, pp. 116-125
DOI
|
5 |
Wisler, D. C., 1985, "Loss Reduction in Axial Flow Compressor Through Low Speed Model," ASME J. Enginnering for Gas Turbines and Power, Vol. 107, pp. 354-363
DOI
|
6 |
Greitzer, E.M., 1976, "Surge and Rotating Stall in Axial Flow Compressors, Part I: Theoretical Compression System Model, Part II: Experimental Results and Comparison with Theory," ASME J. Engineering for Power, Vol. 98, pp. 190-217
DOI
|
7 |
Camp, T. R. and Day, I. J., 1998, "A Study of Spike and Modal Stall Phenomena in a Low Speed Axial Compressor," ASME J. Turbomachinery, Vol. 120, pp. 393-401
DOI
ScienceOn
|
8 |
Fringe, R. and Van Den Braembussche, R., 1984, "Distinction Between Different Types of Impeller and Diffuser Rotating Stall in a Centrifugal Compressor With Vanless Diffuser," ASME J. Turbomachinery, Vol. 106, No. 2, pp. 468-474
|
9 |
Wisler, D. C., 1981, "Core Compressor Exit Stage Study, Volume IV : Data and Performance Report for the Best Stage Configuration," NASA CR-165357
|
10 |
Wellborn, S. R. and Okiishi, T. H., 1999, "The Influence of Shrouded Stator Cavity Flows on Multistage Compressor Performance," ASME J. Turbomachinery, Vol. 121, pp. 486-498
DOI
|
11 |
Greitzer, E. M. and Moore, F. K., 1986, "A Theory of Post-Stall Transients in Axial Compression Systems: Part 2 - Application," J. Engineering for Gas Turbines and Power, Vol. 108, pp. 231-239
DOI
|