Browse > Article

An Analysis of Cut-slope Based on the Prediction of Joint Distribution inside the Cut-face  

Lee Chang-Sup ((주)동해기초)
Chung Jin-Bo (부경대학교 건설공학부)
Cho Taechin (부경대학교 환경탐사공학과)
Publication Information
Tunnel and Underground Space / v.14, no.6, 2004 , pp. 391-398 More about this Journal
Abstract
An algebraic algorithm for predicting the joint trace distribution on the cut-face of rock slope based on the orientations and the locations of joints investigated in the borehole has been developed. Joint trace prediction is manipulated by utilizing the three dimensional plane equations of both joint planes and projection face, and the extent of trace within the projection area is calculated by considering the persistence of each joint plane. Joint trace prediction method is efficiently applied for analyzing the stability and the adequacy of support design of Gimhae Naesam cut-slope, which is structurally unstable due to slumping. Structural characteristics of rock mass is investigated by performing DOM drilling and the potential rock mass sliding inside slope face is analyzed by examining the orientations of joint planes which can induce the slope failure. Also, the efficiency of anchor support design is evaluated by considering the joint trace distribution on the anchor installation area and its sliding potential.
Keywords
Joint trace; Plane equation; Persistence; Slumping DOM drilling Anchor;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Woodcock, N. H., 1977, Specification of fabric shapes using an eigenvalue method, Bulletin of the Geological Society of America, 88, 1231-1236   DOI
2 부경대학교 산업과학기술연구소, 2004, 내삼농공단지 산사태지역 사면의 안정 검토 및 시공에 관한 연구
3 Read, S., Richards, L. and Cook, G., 2003, Rock mass defect patterns and the Hoek-Brown failure criterion, Proc. 10th Cong. ISRM, South Africa
4 Priest, S. D. 1985, Hemispherical Projection Methods in Rock Mechanics, George Allen and Unwin, London
5 Barton, N., Bandis, S. C., and Bakhtar, K. 1985, Strength, deformation and conductivity of rock joints. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 22(3), 121-140   DOI   ScienceOn
6 Mahtab, M. A. & Yegulalp, T. M. 1982, A rejection criterion for definition of clusters in orientation data. In R. E. Goodman and F. E. Heuze (eds),. In Issues in Rock Mechanics Proceedings of the 22nd Symposium on Rock Mechanics, Berkeley. American Institute of Mining Metallurgy and Petroleum. Engineers, New York: 116-23
7 Ladanyi, B. and Archambault, G. 1970, Simulation of shear behavior of a jointed rock mass. Proc. 11th Symp. Rock Mech., AIME, New York, 105-125
8 Yoon, K.S., Cho, T.F., You, B.O. & Won, K.S. 2003, A new approach for borehole joint investigation Development of Discontinuity Orientation Measurement drilling system. Proc. 10th Congress of the ISRM: 1355-1358
9 Fisher, R. 1953, Dispersion on a sphere. Proceedings of the Royal Society of London, A217, 295-305