1 |
Lin, T.-K., Lu, L.-Y. and Chang, H. (2014), "Fuzzy logic control of a stiffness-adaptable seismic isolation system", Struct. Control Health Monitor., 22(1), 177-195. https://doi.org/10.1002/stc.1667
DOI
|
2 |
Mitoulis, S.A. (2012), "The Inefficacy of Seismic Isolation in Bridges with Tall Piers", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September.
|
3 |
Pan, P., Ye, L., Shi, W. and Cao, H. (2012), "Engineering practice of seismic isolation and energy dissipation structures in China", Sci. China Technol. Sci., 55(11), 3036-3046. https://doi.org/10.1007/s11431-012-4922-6
DOI
|
4 |
Saiidi, M.S., Vosooghi, A., Choi, H. and Somerville, P. (2014), "Shake table studies and analysis of a two-span RC bridge model subjected to a fault rupture", J. Bridge Eng., 19(8), A4014003. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000478
DOI
|
5 |
Shome, N. and Cornell, C.A. (1999), "Probabilistic seismic demand analysis of nonlinear structures", Ph.D. Dissertation; Stanford University, Stanford, CA, USA.
|
6 |
Tsai, C.S., Chiang, T.C. and Chen, B.J. (2003), "Seismic behavior of MFPS isolated structure under near-fault sources and strong ground motions with long predominant periods", Proceedings of the ASME Pressure Vessels and Piping Conference, Cleveland, OH, USA, July.
|
7 |
Hu, M., Han, Q., Wen, J. and Bai, Y. (2019), "Seismic failure of multi-span simply supported RC slab-on-grider bridge in 2008 Wenchuan earthquake: Case study", Eng. Fail. Anal., 95, 140-153. https://doi.org/10.1016/j.engfailanal.2018.09.011
DOI
|
8 |
Jara, J.M., Lopez, M.G., Jara, M. and Olmos, B.A. (2014), "Rotation and damage index demands for RC medium-length span bridges", Eng. Struct., 74, 205-217. https://doi.org/10.1016/j.engstruct.2014.05.029
DOI
|
9 |
Kumar, M., Whittaker, A.S. amd Constantinou, M.C. (2015), "Characterizing friction in sliding isolation bearings", Earthq. Eng. Struct. D., 44(9), 1409-1425. https://doi.org/10.1002/eqe.2524
DOI
|
10 |
Karim, K.R. and Yamazaki, F. (2007), "Effect of isolation on fragility curves of highway bridges based on simplified approach", Soil. Dyn. Earthq. Eng., 27(5), 414-426. https://doi.org/10.1016/j.soildyn.2006.10.006
DOI
|
11 |
Alcala-Fdez, J., Alcala, R. and Herrera, F. (2011), "A fuzzy association rule-based classification model for high-dimensional problems with genetic rule selection and lateral tuning", IEEE T. Fuzzy Syst., 19(5), 857-872. https://doi.org/10.1109/tfuzz.2011.2147794
DOI
|
12 |
He, X., Wu, T., Zou, Y., Chen, Y.F., Guo, H. and Yu, Z. (2017), "Recent developments of high-speed railway bridges in China", Struct. Infrastruct. E., 13(12), 1584-1595. https://doi.org/10.1080/15732479.2017.1304429
DOI
|
13 |
Castro, J.R., Castillo, O., Melin, P. and Rodriguez-Diaz, A. (2008), "Building fuzzy inference systems with a new interval type-2 fuzzy logic toolbox", Trans. Comput Sci., 1, 104-114. https://doi.org/10.1007/978-3-540-79299-4_5
DOI
|
14 |
Li, D., Cao, M., Deng, T. and Zhang, S. (2019), "Wavelet packet singular entropy-based method for damage identification in curved continuous girder bridges under seismic excitations", Sensors, 19(19), 4272. https://doi.org/10.3390/s19194272
DOI
|
15 |
Ghosh, J., Padgett, J.E. and Sanchez-Silva, M. (2015), "Seismic damage accumulation in highway bridges in earthquake-prone regions", Earthq. Spectra., 31(1), 115-135. https://doi.org/0.1193/120812eqs347m
DOI
|
16 |
Jiang, L., He, W., Wei, B., Wang, Z. and Li, S. (2019), "The shear pin strength of friction pendulum bearings (FPB) in simply supported railway bridges", B. Earthq. Eng., 17(11), 6109-6139. https://doi.org/10.1007/s10518-019-00698-x
DOI
|
17 |
Khoshnoudian, F. and Hemmati, T.A. (2014), "Impact of structures with double concave friction pendulum bearings on adjacent structures", P. I. Civil Eng.-Str. B., 167(1), 41-53. https://doi.org/10.1680/stbu.12.00001
DOI
|
18 |
Chen, L.K. and Jiang, L.Z. (2011), "Inelastic displacement spectra for displacement-based seismic design of high-speed railway bridge pier", Appl. Mech. Mater., 121-126, 892-896. https://doi.org/10.4028/www.scientific.net/AMM.121-126.892
DOI
|
19 |
Briseghella, B., Zordan, T., Liu, T. and Mazzarolo, E. (2013), "Friction pendulum system as a retrofit technique for existing reinforced concrete building", Struct. Eng. Int., 23(2), 219-224. https://doi.org/10.2749/101686613X13439149157759
DOI
|
20 |
Castro, J., Castillo, O. and Melin, P. (2007), "An interval type-2 fuzzy logic toolbox for control applications", Proceedings of the 2007 IEEE International Fuzzy Systems Conference, London, UK, July.
|
21 |
Choi, K.M., Cho, S.W., Jung, H.J. and Lee, I.W. (2004), "Semiactive fuzzy control for seismic response reduction using magnetorheological dampers", Earthq. Eng. Struct. D., 33(6), 723-736. https://doi.org/10.1002/eqe.372
DOI
|
22 |
Eroz, M. and DesRoches, R. (2013), "The influence of design parameters on the response of bridges seismically isolated with the Friction Pendulum System (FPS)", Eng. Struct., 56, 585-599. https://doi.org/10.1016/j.engstruct.2013.05.020
DOI
|
23 |
Han, Q., Du, X., Liu, J., Li, Z., Li, L. and Zhao, J. (2009), "Seismic damage of highway bridges during the 2008 Wenchuan earthquake", Earthq Eng Eng. Vib., 8(2), 263-273. https://doi.org/10.1007/s11803-009-8162-0
DOI
|
24 |
Zadeh, L.A. (1965), "Fuzzy Sets", Inf. Control, 8(3), 338-353. https://doi.org/10.1016/S0019-9958(65)90241-X
DOI
|
25 |
Kim, Y.S. and Yun, C.B. (2007), "Seismic response characteristics of bridges using double concave friction pendulum bearings with tri-linear behavior", Eng. Struct., 29(11), 3082-3093. https://doi.org/10.1016/j.engstruct.2007.02.009
DOI
|
26 |
Eroz, M. and Desroches, R. (2008), "Bridge seismic response as a function of the Friction Pendulum System (FPS) modeling assumptions", Eng. Struct., 30(11), 3204-3212. https://doi.org/10.1016/j.engstruct.2008.04.032
DOI
|
27 |
Lin, C.C.J., Hung, H.H., Liu, K.Y. and Chai, J.F. (2010), "Reconnaissance observation on bridge damage caused by the 2008 Wenchuan (China) earthquake", Earthq. Spectra., 26(4), 1057-1083. https://doi.org/10.1193/1.3479947
DOI
|
28 |
Usami, T. and Kumar, S. (1998), "Inelastic seismic design verification method for steel bridge piers using a damage index based hysteretic model", Eng. Struct., 20(4-6), 472-480. https://doi.org/10.1016/S0141-0296(97)00023-0
DOI
|
29 |
Wei, B., Yang, T., Jiang, L. and He, X. (2018), "Effects of uncertain characteristic periods of ground motions on seismic vulnerabilities of a continuous track-bridge system of highspeed railway", B. Earthq. Eng., 16(9), 3739-3769. https://doi.org/10.1007/s10518-018-0326-8
DOI
|
30 |
Xia, H., Han, Y., Zhang, N. and Guo, W. (2006), "Dynamic analysis of train-bridge system subjected to non-uniform seismic excitations", Earthq. Eng. Struct. D., 35(12), 1563-1579. https://doi.org/10.1002/eqe.594
DOI
|
31 |
Oh, S.-T. and Kim, Y.S. (1998), "Experimental and analytical investigation of a seismically isolated bridge model with friction pendulum system", KSCE J. Civil Eng., 2(3), 265-272. https://doi.org/10.1007/BF02830480
DOI
|
32 |
Lin, S. and Xiong, H. (2011), Advances in Computer Science, Environment, Ecoinformatics, and Education, Part II: International Conference, CSEE 2011, Wuhan, China, August, pp. 526-527.
|
33 |
Lu, L.-Y. and Lin, G.-L. (2009), "Fuzzy friction controllers for semi-active seismic isolation systems", J Intel. Mater. Syst. Struct., 20(14), 1747-1770. https://doi.org/10.1177/1045389X09343788
DOI
|
34 |
Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2006), OpenSEES command language manual, Department of Civil Environmental Engineering University of California, Berkeley, CA, USA, pp.134-142.
|
35 |
Wei, B., Li, C., Jia, X., He, X. and Yang, M. (2019), "Effects of shear keys on seismic performance of an isolation system", Smart Struct. Syst., Int. J., 24(3), 345-360. https://doi.org/10.12989/sss.2019.24.3.345
DOI
|
36 |
Padgett, J.E., Dennemann, K. and Ghosh, J. (2010), "Risk-based seismic life-cycle cost benefit (LCC-B) analysis for bridge retrofit assessment", Struct. Saf., 32(3), 165-173. https://doi.org/10.1016/j.strusafe.2009.10.003
DOI
|
37 |
Ponzo, F.C., Cesare, A.D., Leccese, G. and Nigro, D. (2015), "Shaking table tests of a base isolated structure with double concave friction pendulum bearings", Bull. New Zealand Soc. Earthq. Eng., 48(2), 136-144. https://doi.org/10.5459/bnzsee.48.2.136-144
DOI
|
38 |
Tsopelas, P., Constantinou, M.C., Kim, Y.S. and Okamoto, S. (1996), "Experimental study of FPS system in bridge seismic isolation", Earthq. Eng. Struct. D., 25(1), 65-78. https://doi.org/10.1016/0148-9062(96)81967-X
DOI
|
39 |
Schanack, F., Valdebenito, G. and Alvial, J. (2012), "Seismic Damage to Bridges during the 27 February 2010 Magnitude 8.8 Chile Earthquake", Earthq. Spectra., 28(1), 301-315. https://doi.org/10.1193/1.3672424
DOI
|
40 |
He, R., Yang, Y. and Sneed, L.H. (2016), "Post-repair seismic assessment of RC bridges damaged with fractured column bars - A numerical approach", Eng. Struct., 112, 100-113. https://doi.org/10.1016/j.engstruct.2016.01.007
DOI
|
41 |
Zayas, V.A., Low, S.S. and Mahin, S.A. (1990), "A simple pendulum technique for achieving seismic isolation", Earthq. Spectra, 6(2), 317-333. https://doi.org/10.1193/1.1585573
DOI
|
42 |
Fenz, D.M. and Constantinou, M.C. (2006), "Behaviour of the double concave friction pendulum bearing", Earthq. Eng. Struct. D., 35(11), 1403-1424. https://doi.org/10.1002/eqe.589
DOI
|
43 |
Roy, A., Bhattacharya, G. and Roy, R. (2017), "Maximum credible damage of RC bridge pier under bi-directional seismic excitation for all incidence angles", Eng. Struct., 152, 251-273. https://doi.org/10.1016/j.engstruct.2017.09.008
DOI
|