Study on the propagation mechanism of blast waves using the ultra-dynamic strain test system |
Liu, Fei
(Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Shenzhen Clean Energy Research Institute, College of Civil and Transportation Engineering, Shenzhen University)
Gao, Mingzhong (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Shenzhen Clean Energy Research Institute, College of Civil and Transportation Engineering, Shenzhen University) Guo, Ziru (School of Chemical Engineering, Anhui University of Science and Technology) Zhou, Changtai (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Shenzhen Clean Energy Research Institute, College of Civil and Transportation Engineering, Shenzhen University) Wang, Jun (Guangdong Provincial Key Laboratory of Deep Earth Sciences and Geothermal Energy Exploitation and Utilization, Shenzhen Clean Energy Research Institute, College of Civil and Transportation Engineering, Shenzhen University) |
1 | Cho, S.H., Nakamura, Y. and Mohanty, B. (2008), "Numerical study of fracture plane control in laboratory-scale blasting", Eng. Fract. Mech., 75(13), 3966-3984. https://doi.org/10.1016/j.engfracmech.2008.02.007 DOI |
2 | Gao, X.T. (2010), Test on Super Dynamic Strain in Explosion Test Block, D. Huainan: Anhui University of Science & Technology. |
3 | Gary, G. and Bailly, P. (1998), "Behaviour of quasi-brittle material at high strain rate. Experiment and modeling", Eur. J. Mech. - A/Solids, 17(3), 403-420. https://doi.org/10.1016/S0997-7538(98)80052-1 DOI |
4 | Jean, Y., Chen, G. and Gu, C. (2019), "Computational modeling and forensic analysis for terrorist airplane bombing: A case study", Eng. Fract. Mech., 211, 137-160. https://doi.org/10.1016/j.engfracmech.2019.01.032 DOI |
5 | Kim, B. and Yi, J.H. (2020), "Structural model updating of the Gageocho Ocean Research Station using mass reallocation method", Smart Struct. Syst., Int. J., 26(3), 291-309. http://dx.doi.org/10.12989/sss.2020.26.3.291 DOI |
6 | Lee, E.L., Hornig, H.C. and Kury, J.W. (1968), "Adiabatic expansion of high explosive detonation products", Report UCRL-50422, University of California, Lawrence Radiation Laboratory, Livermore, CA, USA. |
7 | Cheng, Z.B., Li, L.H. and Zhang, Y.N. (2020), "Laboratory investigation of the mechanical properties of coal-rock combined body", Bull. Eng. Geol. Environ., 79, 1947-1958. https://doi.org/10.1007/s10064-019-01613-z DOI |
8 | Li, A., Fang, Q., Zhang, D.L., Luo, J.W. and Hong, X.F. (2018), "Blast vibration of a large-span high-speed railway tunnel based on microseismic monitoring", Smart Struct. Syst., Int. J., 21(5), 561-569. http://dx.doi.org/10.12989/sss.2018.21.5.561 DOI |
9 | Choi, J.H., Choi, S.J. and Kim, J.H.J. (2018), "Evaluation of blast resistance and failure behavior of prestressed concrete under blast loading", Constr. Build. Mater., 173, 550-572. https://doi.org/10.1016/j.conbuildmat.2018.04.047 DOI |
10 | Jayasinghe, B., Zhao, Z.Y., Chee, A.G.T., Zhou, H.Y. and Gui, Y.L. (2019), "Attenuation of rock blasting induced ground vibration in rock-soil interface", J. Rock Mech. Geotech. Eng., 11(4), 770-778. https://doi.org/10.1016/j.jrmge.2018.12.009 DOI |
11 | Kong, D., Cheng, Z. and Zheng, S. (2019), "Study on failure mechanism and stability control measures in large-cutting-height coal mining face with deep-buried seam", Bull. Eng. Geol. Environ., 78(8), 6143-6157. https://doi.org/10.1007/s10064-019-01523-0 DOI |
12 | Liu, F., Guo, Z.R., Lv, H.Y. and Cheng, Z.B, (2018), "Test and analysis of blast wave in mortar test block", Int. J. Rock Mech. Min. Sci., 108, 80-85. https://doi.org/10.1016/j.ijrmms.2018.06.003 DOI |
13 | Nelson, S.M. and O'Toole, B.J. (2018), "Computational analysis of blast loaded composite cylinders", Int. J. Impact Eng., 119, 26-39. https://doi.org/10.1016/j.ijimpeng.2018.04.013 DOI |
14 | Rahmani, M., Oskouei, A.N. and Petrudi, A.M. (2020), "Experimental and numerical study of the blast wave decrease using sandwich panel by granular materials core", Defence Technology, In-press. https://doi.org/10.1016/j.dt.2020.09.004 DOI |
15 | Sarfarazi, V., Haeri, H. and Shemirani, A.B. (2018), "Simulation of fracture mechanism of pre-holed concrete model under Brazilian test using PFC3D", Smart Struct. Syst., Int. J., 22(6), 675-687. http://dx.doi.org/10.12989/sss.2018.22.6.675 DOI |
16 | Livermore Software Technology Corporation (LSTC) (2003), LSDYNA Keyword User's Manual, Version 970. Livermore, CA, USA. |
17 | Mehdi, S.C., Ghodrat, K. and Mariusz, Z. (2009), "Numerical analysis of blast-induced wave propagation using FSI and ALEmulti-material formulations", Int. J. Impact Eng., 36(10-11), 1269-1275. https://doi.org/10.1016/j.ijimpeng.2009.03.007 DOI |
18 | Petropoulos, N., Wimmer, M. and Johansson, D. (2018), "Compaction of Confining Materials in Pillar Blast Tests", Rock Mech. Rock Eng., 51, 1907-1919. https://doi.org/10.1007/s00603-018-1447-8 DOI |
19 | Rashad, M., Wahab, M.M.A. and Yang, T.Y. (2019), "Experimental and numerical investigation of RC sandwich panels with helical springs under free air blast loads", Steel Compos. Struct., Int. J., 30(3), 217-230. http://dx.doi.org/10.12989/scs.2019.30.3.217 DOI |
20 | Shi, D.Y., Li, Y.C. and Zhang, S.M. (2005), Display Dynamic Analysis Based on ANSYS/LS-DYNA8.1, Tsinghua University Press, Beijing, China. |
21 | Ajamzadeh, M.R., Sarfarazi, V., Haeri, H. and Dehghani, H. (2018), "The effect of micro parameters of PFC software on the model calibration", Smart Struct. Syst., Int. J., 22(6), 643-662. http://dx.doi.org/10.12989/sss.2018.22.6.643 DOI |
22 | Bai, J.Z. (2005), Theoretical Basis and Case Analysis of LSDYNA3D, Science Press, Beijing, Beijing, China. |
23 | Sarfarazi, V., Abharian, S. and Ghorbani, A. (2021), "Physical test and PFC modelling of rock pillar failure containing two neighboring joints and one hole", Smart Struct. Syst., Int. J., 27(1), 123-137. http://dx.doi.org/10.12989/sss.2021.27.1.123 DOI |
24 | Barla, M., Piovano, G. and Grasselli, G. (2012), "Rock slide simulation with the combined finite-discrete element method", Int. J. Geomech., 12(6), 711-721. https://doi.org/10.1061/(asce)gm.1943-5622.0000204 DOI |
25 | Shi, Y.C., Hao, H. and Li Z.X. (2007), "Numerical simulation of blast wave interaction with structure columns", Shock Waves, 17(1-2), 113-133. https://doi.org/10.1007/s00193-007-0099-5 DOI |
26 | Qiu, P., Yue, Z.W. and Yang, R.S. (2019), "Mode I stress intensity factors measurements in PMMA by caustics method: A comparison between low and high loading rate conditions", Polym. Test., 76, 273-285. https://doi.org/10.1016/j.polymertesting.2019.03.029 DOI |