Browse > Article
http://dx.doi.org/10.12989/sss.2021.27.5.871

Influence of crack on the permeability of plastic concrete  

He, Yongqiang (Yiwu Industrial & Commercial College)
Alyousef, Rayed (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University)
Alaskar, Abdulaziz (Department of Civil Engineering, College of Engineering, King Saud University)
Alabduljabbar, Hisham (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University)
Mohamed, Abdeliazim Mustafa (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University)
Maureira-Carsalade, Nelson (Facultad de Ingenieria, Universidad Catolica de la Santisima Concepcion)
Roco-Videla, Angel (Programa Magister en ciencias quimico-biologicas, Facultad de Ciencias de la Salud, Universidad Bernardo O'Higgins)
Issakhov, Alibek (Al-Farabi Kazakh National University)
Assilzadeh, Hamid (Institute of Research and Development, Duy Tan University)
Publication Information
Smart Structures and Systems / v.27, no.5, 2021 , pp. 871-890 More about this Journal
Abstract
This study examined the relations between permeability of the concrete due to addition of new cracks. The different concrete types analyzed were standard concrete, reinforced steel fiber concrete, and reinforced concrete polypropylene fiber. In consideration of the improved polypropylene content of polypropylene fiber reinforced concrete, the crack diameter was decreased by 72-93% for up to 0.25% fiber and cracks were eliminated with 0.3% fiber inclusion. In terms of steel fiber-reinforced concrete, the results showed that steel reinforcing macro fibers decrease the permeability of cracked concrete at wider crack widths. While the permeability of unreinforced concrete was the highest, 0.5% steel content resulted in lower permeability while a higher steel content concrete with 1% steel had the lowest permeability. Crack stitching phenomenon and the effect of multiple cracks may be attributed to the decrease in the permeability. With respect to normal concrete, the findings showed the crack opening displacement at the highest tension is less than 20 microns. At this loading stage, after unloading, around 80% of the displacement is restored and the residual crack opening is notably small, indicating the low impact of cracking on concrete permeability (CP) and showing that CP was increased with crack width. As a result, adding polypropylene aggregate to concrete could significantly reduce the width of crack, while adding steel fiber to concrete reduces the permeability of cracked concrete compared to normal concrete which may result in a minor crack on CP.
Keywords
plastic concrete; permeability; crack; water to cement ratio (W/C); bentonite to cement ratio (B/C);
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Alam, Z., Zhang, C. and Samali, B. (2020c), "The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures", Earthq. Eng. Eng. Vib., 19(1), 223-237. https://doi.org/10.1007/s11803-020-0558-x   DOI
2 Shariati, M., Rafiei, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N.T., Salih, M.N., Mehrabi, P. and Poi-Ngian, S. (2019c), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., Int. J., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225   DOI
3 Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and PoiNgian, S. (2019b), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., Int. J., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319   DOI
4 Desmettre, C. and Charron, J.-P. (2013), "Water Permeability of Reinforced Concrete Subjected to Cyclic Tensile Loading", ACI Mater. J., 110(1).
5 Chen, Z., Wang, J., Ma, K., Huang, X. and Wang, T. (2020e), "Fuzzy adaptive two-bits-triggered control for nonlinear uncertain system with input saturation and output constraint", Int. J. Adapt. Control Signal Process., 34(4), 543-559. https://doi.org/10.1002/acs.3098   DOI
6 Zhang, W., Tang, Z., Yang, Y. and Wei, J. (2021), "Assessment of FRP-Concrete Interfacial Debonding with Coupled Mixed-Mode Cohesive Zone Model", J. Compos. Constr., 25(2), 04021002. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001114   DOI
7 Afrazi, M., Yazdani, M. and Fakhimi, A. (2017b), "The numerical study of effect of an oversize particle on the shear strength of sand in Triaxial test", Proceedings of the 4th International Conference on Recent Innovations in Civil Engineering, Architecture, and Urban Palnning.
8 Afrazi, M., Yazdani, M., Alitalesh, M. and Fakhimi, A. (2018), "Numerical analysis of effective parameters in direct shear test by hybrid discrete - finite element method", Modares Civil Eng. J., 18(3), 13-24.
9 Zhang, T., He, X., Deng, Y., Tsang, D.C., Yuan, H., Shen, J. and Zhang, S. (2020i), "Swine manure valorization for phosphorus and nitrogen recovery by catalytic-thermal hydrolysis and struvite crystallization", Sci. Total Environ., 729, 138999. https://doi.org/10.1016/j.scitotenv.2020.138999   DOI
10 Arif, M.Z., Ahmed, R., Sadia, U.H., Tultul, M.S.I. and Chakma, R. (2020), "Decision Tree Method Using for Fetal State Classification from Cardiotography Data", J. Adv. Eng. Computat., 4(1). https://doi.org/10.25073/jaec.202041.273   DOI
11 Bahadori, A. and Ghassemieh, M. (2016), "Seismic evaluation of I-shaped beam to box-column connections with top and seat plates by the component method."
12 Bahri, H. and Harrag, A. (2018), "Variable Step Size P&O MPPT Controller to Improve Static and Dynamic PV System Performances", J. Adv. Eng. Computat., 2(2) https://doi.org/10.25073/jaec.201822.94   DOI
13 Bai, B., Guo, Z., Zhou, C., Zhang, W. and Zhang, J. (2021), "Application of adaptive reliability importance sampling-based extended domain PSO on single mode failure in reliability engineering", Inform. Sci., 546, 42-59. https://doi.org/10.1016/j.ins.2020.07.069   DOI
14 Roy, S.K., Nayak, D., Dash, N., Dhawan, N. and Rath, S.S. (2020), "Microwave-assisted reduction roasting-magnetic separation studies of two mineralogically different low-grade iron ores", Int. J. Minerals Metall. Mater., 27(11), 1449-1461. https://doi.org/10.1007/s12613-020-1992-5   DOI
15 Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019a), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534   DOI
16 Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020e), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 267, 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886
17 Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020b), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0   DOI
18 Zhang, C. and Wang, H. (2019a), "Robustness of the active rotary inertia driver system for structural swing vibration control subjected to multi-type hazard excitations", Appl. Sci., 9(20), 4391. https://doi.org/10.3390/app9204391   DOI
19 Zhang, J. and Liu, B. (2019), "A review on the recent developments of sequence-based protein feature extraction methods", Current Bioinform., 14(3), 190-199. https://doi.org/10.2174/1574893614666181212102749   DOI
20 Zhang, C. and Mousavi, A.A. (2020), "Blast loads induced responses of RC structural members: State-of-the-art review", Compos. Part B: Eng., 195, 108066. https://doi.org/10.1016/j.compositesb.2020.108066   DOI
21 Zhang, C. and Wang, H. (2019b), "Swing vibration control of suspended structure using active rotary inertia driver system: Parametric analysis and experimental verification", Appl. Sci., 9(15), 3144. https://doi.org/10.3390/app9153144   DOI
22 Zhang, X., Wang, Y., Chen, X., Su, C.-Y., Li, Z., Wang, C. and Peng, Y. (2018), "Decentralized adaptive neural approximated inverse control for a class of large-scale nonlinear hysteretic systems with time delays", IEEE Transact. Syst. Man Cybernet.: Syst., 49(12), 2424-2437. https://doi.org/10.1109/TSMC.2018.2827101   DOI
23 Zhang, C., Alam, Z., Sun, L., Su, Z. and Samali, B. (2019a), "Fibre Bragg grating sensor-based damage response monitoring of an asymmetric reinforced concrete shear wall structure subjected to progressive seismic loads", Struct. Control Health Monitor., 26(3), e2307. https://doi.org/10.1002/stc.2307   DOI
24 Zhang, C., Gholipour, G. and Mousavi, A.A. (2019b), "Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading", Eng. Struct., 181, 124-142. https://doi.org/10.1016/j.engstruct.2018.12.014   DOI
25 Zhu, J., Wang, X., Chen, M., Wu, P. and Kim, M.J. (2019a), "Integration of BIM and GIS: IFC geometry transformation to shapefile using enhanced open-source approach", Automat. Constr., 106, 102859. https://doi.org/10.1016/j.autcon.2019.102859   DOI
26 Bao, J., Li, S., Zhang, P., Xue, S., Cui, Y. and Zhao, T. (2020a), "Influence of exposure environments and moisture content on water repellency of surface impregnation of cement-based materials", J. Mater. Res. Technol., 9(6), 12115-12125. https://doi.org/10.1016/j.jmrt.2020.08.046   DOI
27 Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., Int. J., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147   DOI
28 Zhu, L., Zhang, C., Guan, X., Uy, B., Sun, L. and Wang, B. (2018), "The multi-axial strength performance of composited structural B-C-W members subjected to shear forces", Steel Compos. Struct., Int. J., 27(1), 75-87. https://doi.org/10.12989/scs.2018.27.1.075   DOI
29 Abedini, M. and Zhang, C. (2020a), "Dynamic performance of concrete columns retrofitted with FRP using segment pressure technique", Compos. Struct., 260, 113473. https://doi.org/10.1016/j.compstruct.2020.113473   DOI
30 Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020c), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., Int. J., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155   DOI
31 Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020d), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., Int. J., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183   DOI
32 Shariati, M., Trung, N.-T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019d), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., Int. J., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427   DOI
33 Liu, J., Wu, C., Wu, G. and Wang, X. (2015), "A novel differential search algorithm and applications for structure design", Appl. Mathe. Computat., 268, 246-269. https://doi.org/10.1016/j.amc.2015.06.036   DOI
34 Liu, S., Chan, F.T. and Ran, W. (2016), "Decision making for the selection of cloud vendor: An improved approach under group decision-making with integrated weights and objective/subjective attributes", Expert Syst. Applicat., 55, 37-47. https://doi.org/10.1016/j.eswa.2016.01.059   DOI
35 Zuo, C., Chen, Q., Tian, L., Waller, L. and Asundi, A. (2015), "Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective", Optics Lasers Eng., 71, 20-32. https://doi.org/10.1016/j.optlaseng.2015.03.006   DOI
36 Afrazi, M. and Rouhanifar, S. (2019), "Experimental study on mechanical behavior of sand-rubber mixtures", Modares Civil Eng. J., 19(4), 83-96.
37 Asadolahi, S.M. and Fanaie, N. (2020), "Performance of self-centering steel moment frame considering stress relaxation in prestressed cables", Adv. Struct. Eng., 1369433219900940. https://doi.org/10.1177/1369433219900940   DOI
38 Xu, M., Li, T., Wang, Z., Deng, X., Yang, R. and Guan, Z. (2018b), "Reducing complexity of HEVC: A deep learning approach", IEEE Transact. Image Process., 27(10), 5044-5059. https://doi.org/10.1109/TIP.2018.2847035   DOI
39 Zhu, J., Wang, X., Wang, P., Wu, Z. and Kim, M.J. (2019b), "Integration of BIM and GIS: Geometry from IFC to shapefile using open-source technology", Automat. Constr., 102, 105-119. https://doi.org/10.1016/j.autcon.2019.02.014   DOI
40 Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., Int. J., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067   DOI
41 Zhao, J., Liu, J., Jiang, J. and Gao, F. (2020), "Efficient Deployment with Geometric Analysis for mmWave UAV Communications", IEEE Wireless Commun. Lett., 9(7), 1115-1119. https://doi.org/10.1109/LWC.2020.2982637   DOI
42 Chen, J., Liu, G. and Liu, Y. (2020d), "Lightweight privacy-preserving raw data publishing scheme", IEEE Transact. Emerg. Topics Comput. https://doi.org/10.1109/TETC.2020.2974183   DOI
43 Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019b), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., Int. J., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415   DOI
44 Wang, J., Huang, Y., Wang, T., Zhang, C. and hui Liu, Y. (2020a), "Fuzzy finite-time stable compensation control for a building structural vibration system with actuator failures", Appl. Soft Comput., 93, 106372. https://doi.org/10.1016/j.asoc.2020.106372   DOI
45 Wang, J., Zhu, P., He, B., Deng, G., Zhang, C. and Huang, X. (2020b), "An adaptive neural sliding mode control with ESO for uncertain nonlinear systems", Int. J. Control Automat. Syst., 1-11. https://doi.org/10.1007/s12555-019-0972-x   DOI
46 Wang, L., Huang, Y., Xie, Y. and Du, Y. (2020c), "A new regularization method for dynamic load identification", Science Progress, 103(3), 0036850420931283. https://doi.org/10.1177/0036850420931283   DOI
47 Wang, W., Guo, J., Long, C., Li, W. and Guan, J. (2015), "Flaky carbonyl iron particles with both small grain size and low internal strain for broadband microwave absorption", J. Alloys Compounds, 637, 106-111. https://doi.org/10.1016/j.jallcom.2015.02.220   DOI
48 Xu, M., Li, C., Chen, Z., Wang, Z. and Guan, Z. (2018a), "Assessing visual quality of omnidirectional videos", IEEE Transact. Circuits Syst. Video Technol., 29(12), 3516-3530. https://doi.org/10.1109/TCSVT.2018.2886277   DOI
49 Afsar Dizaj, E., Fanaie, N. and Zarifpour, A. (2018), "Probabilistic seismic demand assessment of steel frames braced with reduced yielding segment buckling restrained braces", Adv. Struct. Eng., 21(7), 1002-1020. https://doi.org/10.1177/1369433217737115   DOI
50 Liu, G., Ren, G., Zhao, L., Cheng, L., Wang, C. and Sun, B. (2017), "Antibacterial activity and mechanism of bifidocin A against Listeria monocytogenes", Food Control, 73, 854-861. https://doi.org/10.1016/j.foodcont.2016.09.036   DOI
51 Liu, Y., Hu, B., Wu, S., Wang, M., Zhang, Z., Cui, B., He, L. and Du, M. (2019), "Hierarchical nanocomposite electrocatalyst of bimetallic zeolitic imidazolate framework and MoS2 sheets for non-Pt methanol oxidation and water splitting", Appl. Catal. B: Environ., 258, 117970. https://doi.org/10.1016/j.apcatb.2019.117970   DOI
52 Liu, Y., Zhang, B., Feng, Y., Lv, X., Ji, D., Niu, Z., Yang, Y., Zhao, X. and Fan, Y. (2020i), "Development of 340-GHz Transceiver Front End Based on GaAs Monolithic Integration Technology for THz Active Imaging Array", Appl. Sci., 10(21), 7924. https://doi.org/10.3390/app10217924   DOI
53 Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
54 Lv, Z. and Qiao, L. (2020), "Deep belief network and linear perceptron based cognitive computing for collaborative robots", Appl. Soft Comput., 92, 106300. https://doi.org/10.1016/j.asoc.2020.106300   DOI
55 Zhao, H., Li, Y., Song, Q., Liu, S., Ma, Q., Ma, L. and Shu, X. (2019), "Catalytic reforming of volatiles from co-pyrolysis of lignite blended with corn straw over three different structures of iron ores", J. Anal. Appl. Pyrol., 144, 104714. https://doi.org/10.1016/j.jaap.2019.104714   DOI
56 Xu, M., Li, C., Zhang, S. and Le Callet, P. (2020), "State-of-the-art in 360 video/image processing: Perception, assessment and compression", IEEE J. Select. Topics Signal Process., 14(1), 5-26. https://doi.org/10.1109/JSTSP.2020.2966864   DOI
57 Yue, H., Wang, H., Chen, H., Cai, K. and Jin, Y. (2020), "Automatic detection of feather defects using Lie group and fuzzy Fisher criterion for shuttlecock production", Mech. Syst. Signal Process., 141, 106690. https://doi.org/10.1016/j.ymssp.2020.106690   DOI
58 Zhang, C. and Wang, H. (2020c), "Swing vibration control of suspended structures using the Active Rotary Inertia Driver system: Theoretical modeling and experimental verification", Struct. Control Health Monitor., 27(6), e2543. https://doi.org/10.1002/stc.2543   DOI
59 Lv, Z. and Song, H. (2019), "Mobile internet of things under data physical fusion technology", IEEE Internet of Things Journal, 7(5), 4616-4624. https://doi.org/10.1109/JIOT.2019.2954588   DOI
60 Fu, X., Pace, P., Aloi, G., Yang, L. and Fortino, G. (2020), "Topology optimization against cascading failures on wireless sensor networks using a memetic algorithm", Computer Networks, 177, 107327. https://doi.org/10.1016/j.comnet.2020.107327   DOI
61 Han, X., Zhang, D., Yan, J., Zhao, S. and Liu, J. (2020), "Process development of flue gas desulphurization wastewater treatment in coal-fired power plants towards Zero Liquid Discharge: Energetic, economic and environmental analyses", J. Cleaner Product., 261, 121144. https://doi.org/10.1016/j.jclepro.2020.121144   DOI
62 Hannawi, K., Bian, H., Prince-Agbodjan, W. and Raghavan, B. (2016), "Effect of different types of fibers on the microstructure and the mechanical behavior of ultra-high performance fiber-reinforced concretes", Compos. Part B: Eng., 86, 214-220. https://doi.org/10.1016/j.compositesb.2015.09.059   DOI
63 He, L., Chen, Y. and Li, J. (2018a), "A three-level framework for balancing the tradeoffs among the energy, water, and air-emission implications within the life-cycle shale gas supply chains", Resour. Conserv. Recycl., 133, 206-228. https://doi.org/10.1016/j.resconrec.2018.02.015   DOI
64 He, L., Chen, Y., Zhao, H., Tian, P., Xue, Y. and Chen, L. (2018b), "Game-based analysis of energy-water nexus for identifying environmental impacts during Shale gas operations under stochastic input", Sci. Total Environ., 627, 1585-1601. https://doi.org/10.1016/j.scitotenv.2018.02.004   DOI
65 Cao, B., Dong, W., Lv, Z., Gu, Y., Singh, S. and Kumar, P. (2020a), "Hybrid microgrid many-objective sizing optimization with fuzzy decision", IEEE Transact. Fuzzy Syst., 28(11), 2702-2710. https://doi.org/10.1109/TFUZZ.2020.3026140   DOI
66 Bao, J., Xue, S., Zhang, P., Dai, Z. and Cui, Y. (2020b), "Coupled effects of sustained compressive loading and freeze-thaw cycles on water penetration into concrete", Struct. Concrete, 22, E944-E954. https://doi.org/10.1002/suco.201900200   DOI
67 Cai, C., Wu, X., Liu, W., Zhu, W., Chen, H., Qiu, J.C.D., Sun, C.- N., Liu, J., Wei, Q. and Shi, Y. (2020), "Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance", J. Mater. Sci. Technol., 57, 51-64. https://doi.org/10.1016/j.jmst.2020.05.004   DOI
68 Cao, L. (2020), "Changing Port Governance Model: Port Spatial Structure and Trade Efficiency", J. Coastal Res., 95(SI), 963-968. https://doi.org/10.2112/SI95-187.1   DOI
69 Ding, L., Li, S., Gao, H., Liu, Y.-J., Huang, L. and Deng, Z. (2019), "Adaptive neural network-based finite-time online optimal tracking control of the nonlinear system with dead zone", IEEE Transact. Cybernet, 51(1), 382-392. https://doi.org/10.1109/TCYB.2019.2939424   DOI
70 Dinh-Cong, D., Keykhosravi, M.H., Alyousef, R., Salih, M.N., Nguyen, H., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Poi-Ngian, S. (2019), "The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate", Smart Struct. Syst., Int. J., 24(4), 541-552. https://doi.org/10.12989/sss.2019.24.4.541   DOI
71 Lv, Z. and Xiu, W. (2019), "Interaction of edge-cloud computing based on SDN and NFV for next generation IoT", IEEE Internet of Things Journal, 7(7), 5706-5712. https://doi.org/10.1109/JIOT.2019.2942719   DOI
72 Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020d), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Structures, 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031   DOI
73 Alaskar, A., Shah, S., Keerio, M.A., Phulpoto, J.A., Baharom, S., Assilzadeh, H., Alyousef, R., Alabduljabbar, H. and Mohamed, A.M. (2020a), "Development of Pozzolanic material from clay", Adv. Concrete Constr., Int. J., 10(4), 301-310. https://doi.org/10.12989/acc.2020.10.4.301   DOI
74 Aldea, C.-M., Shah, S.P. and Karr, A. (1999), "Permeability of cracked concrete", Mater. Struct., 32(5), 370-376. https://doi.org/10.1007/BF02479629   DOI
75 Mahboubi, A. and Ajorloo, A. (2005), "Experimental study of the mechanical behavior of plastic concrete in triaxial compression", Cement Concrete Res., 35(2), 412-419. https://doi.org/10.1016/j.cemconres.2004.09.011   DOI
76 Marsal, R.J. and Resendiz, D. (1971), "Effectiveness of cutoffs in earth foundations and abutments of dams", Proceedings of the Fourth Pan-American Conference on Soil Mechanics and Foundation Engineering.
77 Miloud, B. (2005), "Permeability and porosity characteristics of steel fiber reinforced concrete", Asian J. Civil Eng. (Build. Hous.), 6(4), 317-330. https://www.sid.ir/en/journal/ViewPaper.aspx?id=48863
78 Cao, Y., Alyousef, R., Baharom, S., Shah, S., Alaskar, A., Alabduljabbar, H., Mustafa Mohamed, A. and Assilzadeh, H. (2020c), "Dynamic attainment of mixed aspect ratio for concrete members reinforced with steel fiber under impact loading", Mech. Adv. Mater. Struct., 1-10. https://doi.org/10.1080/15376494.2020.1847371   DOI
79 Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020e), "Application of extreme learning machine in behavior of beam to column connections", Structures, 25, 861-867. https://doi.org/10.1016/j.istruc.2020.03.058   DOI
80 Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020f), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct., Int. J., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567   DOI
81 He, S., Guo, F. and Zou, Q. (2020b), "MRMD2. 0: A Python Tool for Machine Learning with Feature Ranking and Reduction", Current Bioinform., 15(10), 1213-1221. https://doi.org/10.2174/1574893615999200503030350   DOI
82 Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014   DOI
83 Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833   DOI
84 Mou, B., Li, X., Bai, Y. and Wang, L. (2019a), "Shear behavior of panel zones in steel beam-to-column connections with unequal depth of outer annular stiffener", J. Struct. Eng., 145(2), 04018247. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002256   DOI
85 Huang, H., Huang, M., Zhang, W., Pospisil, S. and Wu, T. (2020a), "Experimental Investigation on Rehabilitation of Corroded RC Columns with BSP and HPFL under Combined Loadings", J. Struct. Eng., 146(8), 04020157. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002725   DOI
86 He, L., Shao, F. and Ren, L. (2020a), "Sustainability appraisal of desired contaminated groundwater remediation strategies: an information-entropy-based stochastic multi-criteria preference model", Environ. Develop. Sustain., 23, 1759-1779. https://doi.org/10.1007/s10668-020-00650-z   DOI
87 Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., Int. J., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279   DOI
88 Cao, B., Zhao, J., Lv, Z., Gu, Y., Yang, P. and Halgamuge, S.K. (2020b), "Multiobjective Evolution of Fuzzy Rough Neural Network via Distributed Parallelism for Stock Prediction", IEEE Transact. Fuzzy Syst., 28(5), 939-952. https://doi.org/10.1109/TFUZZ.2020.2972207   DOI
89 Abedini, M. and Zhang, C. (2020b), "Performance assessment of concrete and steel material models in ls-dyna for enhanced numerical simulation, a state of the art review", Arch. Computat. Methods Eng., 1-22. https://doi.org/10.1007/s11831-020-09483-5   DOI
90 Chen, X., Wang, D., Wang, T., Yang, Z., Zou, X., Wang, P., Luo, W., Li, Q., Liao, L. and Hu, W. (2019b), "Enhanced photoresponsivity of a GaAs nanowire metal-semiconductor-metal photodetector by adjusting the fermi level", ACS Appl. Mater. Interf., 11(36), 33188-33193. https://doi.org/10.1021/acsami.9b07891   DOI
91 Fanaie, N. and Moghadam, H.S. (2019), "Experimental study of rigid connection of drilled beam to CFT column with external stiffeners", J. Constr. Steel Res., 153, 209-221. https://doi.org/10.1016/j.jcsr.2018.10.016   DOI
92 Fanaie, N. and Tahriri, M. (2017), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1016/j.jcsr.2017.06.032   DOI
93 Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016), "Strengthening of moment-resisting frame using cable-cylinder bracing", Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177/1369433216649382   DOI
94 Fanaie, N., Kazerani, S. and Soroushnia, S. (2017), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Numer. Methods Civil Eng., 1(3), 16-23. https://doi.org/10.29252/nmce.1.3.16   DOI
95 Fanaie, N. and Ezzatshoar, S. (2014), "Studying the seismic behavior of gate braced frames by incremental dynamic analysis (IDA)", J. Constr. Steel Res., 99, 111-120. https://doi.org/10.1016/j.jcsr.2014.04.008   DOI
96 Zhang, W. (2020), "Parameter adjustment strategy and experimental development of hydraulic system for wave energy power generation", Symmetry, 12(5), 711. https://doi.org/10.3390/sym12050711   DOI
97 Wang, X.-F., Gao, P., Liu, Y.-F., Li, H.-F. and Lu, F. (2020d), "Predicting Thermophilic Proteins by Machine Learning", Current Bioinform., 15(5), 493-502. https://doi.org/10.2174/1574893615666200207094357   DOI
98 Nguyen, T.B.T. (2017), "Adaptive MIMO Controller Design for Chaos Synchronization in Coupled Josephson Junctions via Fuzzy Neural Networks", J. Adv. Eng. Computat., 1(1), 80-86. http://dx.doi.org/10.25073/jaec.201711.52   DOI
99 Ni, T., Chang, H., Song, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2019a), "Non-intrusive online distributed pulse shrinking-based interconnect testing in 2.5 D IC", IEEE Transact. Circuits Syst. II: Express Briefs, 67(11), 2657-2661. https://doi.org/10.1109/TCSII.2019.2962824   DOI
100 Ni, T., Yao, Y., Chang, H., Lu, L., Liang, H., Yan, A., Huang, Z. and Wen, X. (2019b), "LCHR-TSV: Novel low cost and highly repairable honeycomb-based TSV redundancy architecture for clustered faults", IEEE Transact. Comput.-Aided Des. Integr. Circuits Syst., 39(10), 2938-2951. https://doi.org/10.1109/TCAD.2019.2946243   DOI
101 Desmettre, C. and Charron, J.-P. (2012), "Water permeability of reinforced concrete with and without fiber subjected to static and constant tensile loading", Cement Concrete Res., 42(7), 945-952. https://doi.org/10.1016/j.cemconres.2012.03.014   DOI
102 Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int. J., 19(2), 485-501. https://doi.org/10.12989/scs.2015.19.2.485   DOI
103 Hinchberger, S., Weck, J. and Newson, T. (2010), "Mechanical and hydraulic characterization of plastic concrete for seepage cut-off walls", Can. Geotech. J., 47(4), 461-471. https://doi.org/10.1139/T09-103   DOI
104 Jia, L.-C., Jin, Y.-F., Ren, J.-W., Zhao, L.-H., Yan, D.-X. and Li, Z.-M. (2021), "Highly thermally conductive liquid metal-based composites with superior thermostability for thermal management", J. Mater. Chem. C, 9(8), 2904-2911. https://doi.org/10.1039/D0TC05493C   DOI
105 Abedini, M., Zhang, C., Mehrmashhadi, J. and Akhlaghi, E. (2020b), "Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column", Structures, 28, 456-466. https://doi.org/10.1016/j.istruc.2020.08.084   DOI
106 Abedini, M., Mutalib, A.A., Zhang, C., Mehrmashhadi, J., Raman, S.N., Alipour, R., Momeni, T. and Mussa, M.H. (2020a), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", Front. Struct. Civil Eng., 14(2), 532-553. https://doi.org/10.1007/s11709-020-0604-9   DOI
107 Ni, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2020), "A cost-effective TSV repair architecture for clustered faults in 3D IC", IEEE Transact. Comput.-Aided Des. Integr. Circuits Syst. https://doi.org/10.1109/TCAD.2020.3025169   DOI
108 Pisheh, Y.P. and Hosseini, S.M.M. (2012), "Stress-strain behavior of plastic concrete using monotonic triaxial compression tests", J. Central South Univ., 19(4), 1125-1131. https://doi.org/10.1007/s11771-012-1118-y   DOI
109 Qi, C. and Fourie, A. (2019), "Cemented paste backfill for mineral tailings management: Review and future perspectives", Minerals Eng., 144, 106025. https://doi.org/10.1016/j.mineng.2019.106025   DOI
110 Qi, C., Fourie, A., Chen, Q. and Liu, P. (2019), "Application of first-principles theory in ferrite phases of cemented paste backfill", Minerals Eng., 133, 47-51. https://doi.org/10.1016/j.mineng.2019.01.011   DOI
111 Zhang, J., Chen, Q., Sun, J., Tian, L. and Zuo, C. (2020e), "On a universal solution to the transport-of-intensity equation", Optics Letters, 45(13), 3649-3652. https://doi.org/10.1364/OL.391823   DOI
112 Zhang, H., Qiu, Z., Cao, J., Abdel-Aty, M. and Xiong, L. (2019c), "Event-triggered synchronization for neutral-type semi-Markovian neural networks with partial mode-dependent time-varying delays", IEEE Transact. Neural Networks Learn. Syst., 31(11), 4437-4450. https://doi.org/10.1109/TNNLS.2019.2955287   DOI
113 Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034   DOI
114 Chao, M., Kai, C. and Zhiwei, Z. (2020), "Research on tobacco foreign body detection device based on machine vision", Transact. Inst. Measure. Control, 42(15), 2857-2871. https://doi.org/10.1177/0142331220929816   DOI
115 Yu, H., Zhu, X., Qian, G., Gong, X. and Nie, X. (2020b), "Evaluation of phosphorus slag (PS) content and particle size on the performance modification effect of asphalt", Constr. Build. Mater., 256, 119334. https://doi.org/10.1016/j.conbuildmat.2020.119334   DOI
116 Zhang, C., Abedini, M. and Mehrmashhadi, J. (2020b), "Development of pressure-impulse models and residual capacity assessment of RC columns using high fidelity Arbitrary Lagrangian-Eulerian simulation", Eng. Struct., 224, 111219. https://doi.org/10.1016/j.engstruct.2020.111219   DOI
117 Zhang, C., Chen, Z., Wang, J., Liu, Z. and Chen, C.P. (2020c), "Fuzzy adaptive two-bit-triggered control for a class of uncertain nonlinear systems with actuator failures and dead-zone constraint", IEEE Transac. Cybernetics, 51(1), 210-221. https://doi.org/10.1109/TCYB.2020.2970736   DOI
118 Zhang, C., Gholipour, G. and Mousavi, A.A. (2020d), "State-of-the-Art Review on Responses of RC Structures Subjected to Lateral Impact Loads", Arch. Computat. Methods Eng., 1-31. https://doi.org/10.1007/s11831-020-09467-5   DOI
119 Zhang, J., Sun, J., Chen, Q. and Zuo, C. (2020f), "Resolution analysis in a lens-free on-chip digital holographic microscope", IEEE Transact. Computat. Imag., 6, 697-710. https://doi.org/10.1109/TCI.2020.2964247   DOI
120 Shi, K., Tang, Y., Liu, X. and Zhong, S. (2017), "Non-fragile sampled-data robust synchronization of uncertain delayed chaotic Lurie systems with randomly occurring controller gain fluctuation", ISA Transact., 66, 185-199. https://doi.org/10.1016/j.isatra.2016.11.002   DOI
121 Shi, K., Tang, Y., Zhong, S., Yin, C., Huang, X. and Wang, W. (2018), "Nonfragile asynchronous control for uncertain chaotic Lurie network systems with Bernoulli stochastic process", Int. J. Robust Nonlinear Control, 28(5), 1693-1714. https://doi.org/10.1002/rnc.3980   DOI
122 Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020f), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x   DOI
123 Qiu, T., Shi, X., Wang, J., Li, Y., Qu, S., Cheng, Q., Cui, T. and Sui, S. (2019), "Deep learning: A rapid and efficient route to automatic metasurface design", Adv. Sci., 6(12), 1900128. https://doi.org/10.1002/advs.201900128   DOI
124 Zhang, R., Jiang, T., Li, F., Li, G., Chen, H. and Li, X. (2020g), "Coordinated bidding strategy of wind farms and power-to-gas facilities using a cooperative game approach", IEEE Transact. Sustain. Energy, 11(4), 2545-2555. https://doi.org/10.1109/TSTE.2020.2965521   DOI
125 Zhang, S., Pak, R.Y. and Zhang, J. (2020h), "Vertical time-harmonic coupling vibration of an impermeable, rigid, circular plate resting on a finite, poroelastic soil layer", Acta Geotech., 16, 911-935. https://doi.org/10.1007/s11440-020-01067-8   DOI
126 Zhang, B., Niu, Z., Wang, J., Ji, D., Zhou, T., Liu, Y., Feng, Y., Hu, Y., Zhang, J. and Fan, Y. (2020a), "Four-hundred gigahertz broadband multi-branch waveguide coupler", IET Microwaves, Antennas & Propagation, 14(11), 1175-1179. https://doi.org/10.1049/iet-map.2020.0090   DOI
127 Liu, C., Deng, X., Liu, J., Peng, T., Yang, S. and Zheng, Z. (2020a), "Dynamic response of saddle membrane structure under hail impact", Eng. Struct., 214, 110597. https://doi.org/10.1016/j.engstruct.2020.110597   DOI
128 Liu, C., Wang, F., Deng, X., Pang, S., Liu, J., Wu, Y. and Xu, Z. (2020b), "Hailstone-induced dynamic responses of pretensioned umbrella membrane structure", Adv. Struct. Eng., 1369433220940149. https://doi.org/10.1177/1369433220940149   DOI
129 Mou, B., Zhao, F., Qiao, Q., Wang, L., Li, H., He, B. and Hao, Z. (2019b), "Flexural behavior of beam to column joints with or without an overlying concrete slab", Eng. Struct., 199, 109616. https://doi.org/10.1016/j.engstruct.2019.109616   DOI
130 Qian, J., Feng, S., Li, Y., Tao, T., Han, J., Chen, Q. and Zuo, C. (2020a), "Single-shot absolute 3D shape measurement with deep-learning-based color fringe projection profilometry", Optics Letters, 45(7), 1842-1845. https://doi.org/10.1364/OL.388994   DOI
131 Qu, S., Han, Y., Wu, Z. and Raza, H. (2020), "Consensus modeling with asymmetric cost based on data-driven robust optimization", Group Decision Negotiat., 1-38. https://doi.org/10.1007/s10726-020-09707-w   DOI
132 Rapoport, J., Aldea, C.-M., Shah, S.P., Ankenman, B. and Karr, A. (2002), "Permeability of cracked steel fiber-reinforced concrete", J. Mater. Civil Eng., 14(4), 355-358. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:4(355)   DOI
133 Ren, J., Zhang, C. and Hao, Q. (2020), "A theoretical method to evaluate honeynet potency", Future Generat. Comput. Syst., 116, 76-85. https://doi.org/10.1016/j.future.2020.08.021   DOI
134 Rice, J.D. and Duncan, J.M. (2009), "Findings of case histories on the long-term performance of seepage barriers in dams", J. Geotech. Geoenviron. Eng., 136(1), 2-15. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000175   DOI
135 Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Statist. Mech. Applicat., 124046. https://doi.org/10.1016/j.physa.2019.124046   DOI
136 Zuo, C., Li, J., Sun, J., Fan, Y., Zhang, J., Lu, L., Zhang, R., Wang, B., Huang, L. and Chen, Q. (2020a), "Transport of intensity equation: a tutorial", Optics Lasers Eng., 106187. https://doi.org/10.1016/j.optlaseng.2020.106187   DOI
137 Zuo, C., Sun, J., Li, J., Asundi, A. and Chen, Q. (2020b), "Wide-field high-resolution 3d microscopy with fourier ptychographic diffraction tomography", Optics Lasers Eng., 128, 106003. https://doi.org/10.1016/j.optlaseng.2020.106003   DOI
138 Shi, K., Wang, J., Tang, Y. and Zhong, S. (2020a), "Reliable asynchronous sampled-data filtering of T-S fuzzy uncertain delayed neural networks with stochastic switched topologies", Fuzzy Sets Syst., 381, 1-25. https://doi.org/10.1016/j.fss.2018.11.017   DOI
139 Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
140 Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., Int. J., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433   DOI
141 Shahabi, S., Ramli Sulong, N.H., Shariati, M., Mohammadhassani, M. and Shah, S. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., Int. J., 20(3), 651-669. https://10.12989/scs.2016.20.3.651   DOI
142 Fanaie, N., Faegh, S.S. and Partovi, F. (2019), "An improved and innovative formulation for calculating amplified elastic story drift induced by RBS connections in steel moment frames", J. Constr. Steel Res., 160, 510-527. https://doi.org/10.1016/j.jcsr.2019.06.003   DOI
143 Feng, Q., Li, Y., Wang, N., Hao, Y., Chang, J., Wang, Z., Zhang, X., Zhang, Z. and Wang, L. (2020), "A biomimetic nanogenerator of reactive nitrogen species based on battlefield transfer strategy for enhanced immunotherapy", Small, 16(25), 2002138. https://doi.org/10.1002/smll.202002138   DOI
144 Gao, N. and Lu, K. (2020), "An underwater metamaterial for broadband acoustic absorption at low frequency", Appl. Acoust., 169, 107500. https://doi.org/10.1016/j.apacoust.2020.107500   DOI
145 Gao, N. and Zhang, Y. (2019), "A low frequency underwater metastructure composed by helix metal and viscoelastic damping rubber", J. Vib. Control, 25(3), 538-548. https://doi.org/10.1177/1077546318788446   DOI
146 Liu, C., Wu, X., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R. and Mohamed, A.M. (2020d), "Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns", Steel Compos. Struct., Int. J., 34(5), 743-767. https://doi.org/10.12989/scs.2020.34.5.743   DOI
147 Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997   DOI
148 Trung, N.-T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019a), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., Int. J., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639   DOI
149 Tsai, Y.-H., Wang, J., Chien, W.-T., Wei, C.-Y., Wang, X. and Hsieh, S.-H. (2019), "A BIM-based approach for predicting corrosion under insulation", Automat. Constr., 107, 102923. https://doi.org/10.1016/j.autcon.2019.102923   DOI
150 Liu, C., Wang, F., He, L., Deng, X., Liu, J. and Wu, Y. (2020c), "Experimental and numerical investigation on dynamic responses of the umbrella membrane structure excited by heavy rainfall", J. Vib. Control, 27(5-6). https://doi.org/10.1177/1077546320932691   DOI
151 Liu, J., Wang, C., Sun, H., Wang, H., Rong, F., He, L., Lou, Y., Zhang, S., Zhang, Z. and Du, M. (2020f), "CoOx/CoNy nanoparticles encapsulated carbon-nitride nanosheets as an efficiently trifunctional electrocatalyst for overall water splitting and Zn-air battery", Appl. Catal. B: Environ., 279, 119407. https://doi.org/10.1016/j.apcatb.2020.119407   DOI
152 Liu, Q., Song, Z., Han, H., Donkor, S., Jiang, L., Wang, W. and Chu, H. (2020g), "A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves", Constr. Build. Mater., 260, 119695. https://doi.org/10.1016/j.conbuildmat.2020.119695   DOI
153 Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020a), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., Int. J., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587   DOI
154 Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225   DOI
155 Singh, A. and Singhal, D. (2011), "Permeability of steel fibre reinforced concrete influence of fibre parameters", Procedia Eng., 14, 2823-2829. https://doi.org/10.1016/j.proeng.2011.07.355   DOI
156 Jiao, S.-q., Wang, M.-y. and Song, W.-l. (2020b), "Editorial for special issue on high-temperature molten salt chemistry and technology", Int. J. Minerals Metall. Mater., 27(12), 1569-1571.   DOI
157 Ju, Y., Shen, T. and Wang, D. (2020), "Bonding behavior between reactive powder concrete and normal strength concrete", Constr. Build. Mater., 242, 118024. https://doi.org/10.1016/j.conbuildmat.2020.118024   DOI
158 Kordestani, H., Zhang, C. and Shadabfar, M. (2020), "Beam damage detection under a moving load using random decrement technique and Savitzky-Golay Filter", Sensors, 20(1), 243. https://doi.org/10.3390/s20010243   DOI
159 Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019a), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., Int. J., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207   DOI
160 Mou, B. and Bai, Y. (2018), "Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone", Eng. Struct., 168, 487-504. https://doi.org/10.1016/j.engstruct.2018.04.029   DOI
161 Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081   DOI
162 Huang, Y., Wang, J., Wang, F. and He, B. (2020c), "Eventt-riggered adaptive finite-time tracking control for full state constraints nonlinear systems with parameter uncertainties and given transient performance", ISA Transactions, 108, 131-143. https://doi.org/10.1016/j.isatra.2020.08.022   DOI
163 Huang, Z., Zheng, H., Guo, L. and Mo, D. (2020d), "Influence of the position of artificial boundary on computation accuracy of conjugated infinite element for a finite length cylindrical shell", Acoust. Australia, 48(2), 287-294. https://doi.org/10.1007/s40857-020-00175-5   DOI
164 Yang, S., Deng, B., Wang, J., Li, H., Lu, M., Che, Y., Wei, X. and Loparo, K.A. (2019), "Scalable digital neuromorphic architecture for large-scale biophysically meaningful neural network with multi-compartment neurons", IEEE Transact. Neural Networks Learn. Syst., 31(1), 148-162. https://doi.org/10.1109/TNNLS.2019.2899936   DOI
165 Xue, Q., Zhu, Y. and Wang, J. (2019), "Joint distribution estimation and Naive Bayes classification under local differential privacy", IEEE Transact. Emerg. Topics Comput. https://doi.org/10.1109/TETC.2019.2959581   DOI
166 Yang, M. and Sowmya, A. (2015), "An underwater color image quality evaluation metric", IEEE Transact. Image Process., 24(12), 6062-6071. https://doi.org/10.1109/TIP.2015.2491020   DOI
167 Yang, R., Xu, M., Liu, T., Wang, Z. and Guan, Z. (2018), "Enhancing quality for HEVC compressed videos", IEEE Transact. Circuits Syst. Video Technol., 29(7), 2039-2054. https://doi.org/10.1109/TCSVT.2018.2867568   DOI
168 Yang, J., Li, S., Wang, Z., Dong, H., Wang, J. and Tang, S. (2020), "Using Deep Learning to Detect Defects in Manufacturing: A Comprehensive Survey and Current Challenges", Materials, 13(24), 5755. https://doi.org/10.3390/ma13245755   DOI
169 Yu, H., Dai, W., Qian, G., Gong, X., Zhou, D., Li, X. and Zhou, X. (2020a), "The NOx Degradation Performance of Nano-TiO2 Coating for Asphalt Pavement", Nanomaterials, 10(5), 897. https://doi.org/10.3390/nano10050897   DOI
170 Soroush, A. and Soroush, M. (2005), "Parameters affecting the thickness of bentonite cake in cutoff wall construction: case study and physical modeling", Can. Geotech. J., 42(2), 646-654 https://doi.org/10.1139/t04-090   DOI
171 Sun, L., Li, C., Zhang, C., Su, Z. and Chen, C. (2018), "Early monitoring of rebar corrosion evolution based on FBG sensor", Int. J. Struct. Stabil. Dyn., 18(8), 1840001. https://doi.org/10.1142/S0219455418400011   DOI
172 Sun, L., Li, C., Zhang, C., Liang, T. and Zhao, Z. (2019), "The strain transfer mechanism of fiber bragg grating sensor for extra large strain monitoring", Sensors, 19(8), 1851. https://doi.org/10.3390/s19081851   DOI
173 Sun, L., Yang, Z., Jin, Q. and Yan, W. (2020), "Effect of Axial Compression Ratio on Seismic Behavior of GFRP Reinforced Concrete Columns", Int. J. Struct. Stabil. Dyn., 20(6), 2040004. https://doi.org/10.1142/S0219455420400040   DOI
174 Wang, X.-p., Li, Z.-c., Sun, T.-c., Kou, J. and Li, X.-h. (2020e), "Factor analysis on the purity of magnesium titanate directly prepared from seashore titanomagnetite concentrate through direct reduction", Int. J. Minerals Metall. Mater., 27(11), 1462-1470. https://doi.org/10.1007/s12613-020-1990-7   DOI
175 Wang, X., Liu, Y. and Choo, K. (2020f), "Fault tolerant, ulti-subset aggregation scheme for smart grid", IEEE Transact. Indust. Inform.
176 Li, T., Xu, M., Zhu, C., Yang, R., Wang, Z. and Guan, Z. (2019b), "A deep learning approach for multi-frame in-loop filter of HEVC", IEEE Transact. Image Process., 28(11), 5663-5678. https://doi.org/10.1109/TIP.2019.2921877   DOI
177 Li, B.-H., Liu, Y., Zhang, A.-M., Wang, W.-H. and Wan, S. (2020a), "A Survey on Blocking Technology of Entity Resolution", J. Comput. Sci. Technol., 35(4), 769-793. https://doi.org/10.1007/s11390-020-0350-4   DOI
178 Li, C., Sun, L., Xu, Z., Wu, X., Liang, T. and Shi, W. (2020b), "Experimental Investigation and Error Analysis of High Precision FBG Displacement Sensor for Structural Health Monitoring", Int. J. Struct. Stabil. Dyn., 20(6), 2040011. https://doi.org/10.1142/S0219455420400118   DOI
179 Li, Z., Liu, H., Dun, Z., Ren, L. and Fang, J. (2020d), "Grouting effect on rock fracture using shear and seepage assessment", Constr. Build. Mater., 242, 118131. https://doi.org/10.1016/j.conbuildmat.2020.118131   DOI
180 Huang, J., Alyousef, R., Suhatril, M., Baharom, S., Alabduljabbar, H., Alaskar, A. and Assilzadeh, H. (2020b), "Influence of porosity and cement grade on concrete mechanical properties", Adv. Concrete Constr., Int. J., 10(5), 393-402. https://doi.org/10.12989/acc.2020.10.5.393   DOI
181 Liu, L. and Liu, S. (2020), "Integrated production and distribution problem of perishable products with a minimum total order weighted delivery time", Mathematics, 8(2), 146. https://doi.org/10.3390/math8020146   DOI
182 Hu, Y., Chen, Q., Feng, S. and Zuo, C. (2020), "Microscopic fringe projection profilometry: A review", Optics Lasers Eng., 106192. https://doi.org/10.1016/j.optlaseng.2020.106192   DOI
183 Hubert, M., Desmettre, C. and Charron, J.-P. (2015), "Influence of fiber content and reinforcement ratio on the water permeability of reinforced concrete", Mater. Struct., 48(9), 2795-2807. https://doi.org/10.1617/s11527-014-0354-z   DOI
184 Huo, S.-Y., Huang, H.-B., Wang, L.-J. and Chen, J.-J. (2021), "Deterministic interface modes in two-dimensional acoustic systems", Int. J. Modern Phys. B, 35(1), 2150010. https://doi.org/10.1142/S0217979221500107   DOI
185 ICOLD (1985), Filling Materials: For Watertight Cut Off Walls, CIGB/ICOLD.
186 Islam, G.S. and Gupta, S.D. (2016), "Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete", Int. J. Sustain. Built Environ., 5(2), 345-354. https://doi.org/10.1016/j.ijsbe.2016.05.007   DOI
187 Jiang, Q., Shao, F., Gao, W., Chen, Z., Jiang, G. and Ho, Y.-S. (2018), "Unified no-reference quality assessment of singly and multiply distorted stereoscopic images", IEEE Transact. Image Process., 28(4), 1866-1881. https://doi.org/10.1109/TIP.2018.2881828   DOI
188 Che-Ngoc, H., Pham-Chau, A.-T. and Bora, D.J. (2018), "A New Fuzzy Rule Based Contrast Enhancement Method using The Two-Steps Automatic Clustering Algorithm", J. Adv. Eng. Computat., 2(4), 239-250. http://dx.doi.org/10.25073/jaec.201824.214   DOI
189 Pang, R., Xu, B., Zhou, Y., Zhang, X. and Wang, X. (2020), "Fragility analysis of high CFRDs subjected to mainshock-aftershock sequences based on plastic failure", Eng. Struct., 206, 110152. https://doi.org/10.1016/j.engstruct.2019.110152   DOI
190 Zhang, C. (2014), "Control force characteristics of different control strategies for the wind-excited 76-story benchmark building structure", Adv. Struct. Eng., 17(4), 543-559. https://doi.org/10.1260/1369-4332.17.4.543   DOI
191 Wu, C., Wang, X., Chen, M. and Kim, M.J. (2019a), "Differential received signal strength based RFID positioning for construction equipment tracking", Adv. Eng. Inform., 42, 100960. https://doi.org/10.1016/j.aei.2019.100960   DOI
192 Liu, J., Liu, Y. and Wang, X. (2020e), "An environmental assessment model of construction and demolition waste based on system dynamics: a case study in Guangzhou", Environ. Sci. Pollut. Res., 27(30), 37237-37259. https://doi.org/10.1007/s11356-019-07107-5   DOI
193 Liu, S., Yu, W., Chan, F.T. and Niu, B. (2020h), "A variable weight-based hybrid approach for multi-attribute group decision making under interval-valued intuitionistic fuzzy sets", Int. J. Intell. Syst., 36(2), 1015-1052. https://doi.org/10.1002/int.22329   DOI
194 Shi, K., Wang, J., Zhong, S., Tang, Y. and Cheng, J. (2020b), "Non-fragile memory filtering of TS fuzzy delayed neural networks based on switched fuzzy sampled-data control", Fuzzy Sets Syst., 394, 40-64. https://doi.org/10.1016/j.fss.2019.09.001   DOI
195 Wu, T., Cao, J., Xiong, L. and Zhang, H. (2019b), "New stabilization results for semi-Markov chaotic systems with fuzzy sampled-data control", Complexity, 2019. https://doi.org/10.1155/2019/7875305   DOI
196 Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2020a), "Critical review of data-driven decision-making in bridge operation and maintenance", Struct. Infrastruct. Eng., 1-24. https://doi.org/10.1080/15732479.2020.1833946   DOI
197 Wu, T., Xiong, L., Cheng, J. and Xie, X. (2020b), "New results on stabilization analysis for fuzzy semi-Markov jump chaotic systems with state quantized sampled-data controller", Inform. Sci., 521, 231-250. https://doi.org/10.1016/j.ins.2020.02.051   DOI
198 Al-khafaji, A. (2019), "Some Results of Differential Subordination and Differential Superordination Theorems for Univalent Functions Defined by Ruscheweyh Derivative Operator", J. Adv. Eng. Computat., 3(2). https://doi.org/10.25073/jaec.201932.237   DOI
199 Al Kajbaf, A., Fanaie, N. and Najarkolaie, K.F. (2018), "Numerical simulation of failure in steel posttensioned connections under cyclic loading", Eng. Fail. Anal., 91, 35-57. https://doi.org/10.1016/j.engfailanal.2018.04.024   DOI
200 Mousavi, A.A., Zhang, C., Masri, S.F. and Gholipour, G. (2020), "Structural damage localization and quantification based on a ceemdan hilbert transform neural network approach: A model steel truss bridge case study", Sensors, 20(5), 1271. https://doi.org/10.3390/s20051271   DOI
201 Gao, N., Luo, D., Cheng, B. and Hou, H. (2020), "Teaching-learning-based optimization of a composite metastructure in the 0-10 kHz broadband sound absorption range", J. Acoust. Soc. Am., 148(2), EL125-EL129. https://doi.org/10.1121/10.0001678   DOI
202 Gao, N., Guo, X., Deng, J., Cheng, B. and Hou, H. (2021a), "Elastic wave modulation of double-leaf ABH beam embedded mass oscillator", Appl. Acoust., 173, 107694. https://doi.org/10.1016/j.apacoust.2020.107694   DOI
203 Gao, N., Wang, B., Lu, K. and Hou, H. (2021b), "Complex band structure and evanescent Bloch wave propagation of periodic nested acoustic black hole phononic structure", Appl. Acoust., 177, 107906. https://doi.org/10.1016/j.apacoust.2020.107906   DOI
204 Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. http://dx.doi.org/10.1016/j.conbuildmat.2013.11.036   DOI
205 Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008   DOI
206 Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050   DOI
207 Jiao, S.-q., Jiao, H.-d., Song, W.-l., Wang, M.-y. and Tu, J.-g. (2020a), "A review on liquid metals as cathodes for molten salt/oxide electrolysis", Int. J. Minerals Metall. Mater., 27, 1588-1598. https://doi.org/10.1007/s12613-020-1971-x   DOI
208 Chen, C., Wang, X., Wang, Y., Yang, D., Yao, F., Zhang, W., Wang, B., Sewvandi, G.A., Yang, D. and Hu, D. (2020a), "Additive Manufacturing of Piezoelectric Materials", Adv. Function. Mater., 30(52), 2005141. https://doi.org/10.1002/adfm.202005141   DOI
209 Chen, Y., He, L., Li, J. and Zhang, S. (2018), "Multi-criteria design of shale-gas-water supply chains and production systems towards optimal life cycle economics and greenhouse gas emissions under uncertainty", Comput. Chem. Eng., 109, 216-235. https://doi.org/10.1016/j.compchemeng.2017.11.014   DOI
210 Chen, H., Qiao, H., Xu, L., Feng, Q. and Cai, K. (2019a), "A fuzzy optimization strategy for the implementation of RBF LSSVR model in vis-NIR analysis of pomelo maturity", IEEE Transact. Indust. Inform., 15(11), 5971-5979. https://doi.org/10.1109/TII.2019.2933582   DOI
211 Chen, H., Chen, A., Xu, L., Xie, H., Qiao, H., Lin, Q. and Cai, K. (2020b), "A deep learning CNN architecture applied in smart near-infrared analysis of water pollution for agricultural irrigation resources", Agricul. Water Manage., 240, 106303. https://doi.org/10.1016/j.agwat.2020.106303   DOI
212 Chen, H., Zhang, G., Fan, D., Fang, L. and Huang, L. (2020c), "Nonlinear lamb wave analysis for microdefect identification in mechanical structural health assessment", Measurement, 108026. https://doi.org/10.1016/j.measurement.2020.108026   DOI
213 Guan, Z., Xing, Q., Xu, M., Yang, R., Liu, T. and Wang, Z. (2019), "MFQE 2.0: A new approach for multi-frame quality enhancement on compressed video", IEEE Transact. Pattern Anal. Mach. Intell., 43(3), 949-963. https://doi.org/10.1109/TPAMI.2019.2944806   DOI
214 Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2021), "Ontological knowledge base for concrete bridge rehabilitation project management", Automat. Constr., 121, 103428. https://doi.org/10.1016/j.autcon.2020.103428   DOI
215 Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel and Composite Structures, 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433   DOI
216 Alam, Z., Sun, L., Zhang, C., Su, Z. and Samali, B. (2020a), "Experimental and numerical investigation on the complex behaviour of the localised seismic response in a multi-storey plan-asymmetric structure", Struct. Infrastruct. Eng., 17(1), 86-102. https://doi.org/10.1080/15732479.2020.1730914   DOI
217 Alam, Z., Zhang, C. and Samali, B. (2020b), "Influence of seismic incident angle on response uncertainty and structural performance of tall asymmetric structure", Struct. Des. Tall Special Build., 29(2), e1750. https://doi.org/10.1002/tal.1750   DOI
218 Shariati, M., Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Arabnejad Khanouki, M.M. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017   DOI
219 Gholipour, G., Zhang, C. and Mousavi, A.A. (2020a), "Nonlinear numerical analysis and progressive damage assessment of a cable-stayed bridge pier subjected to ship collision", Marine Struct., 69, 102662. https://doi.org/10.1016/j.marstruc.2019.102662   DOI
220 Gholipour, G., Zhang, C. and Mousavi, A.A. (2020b), "Numerical analysis of axially loaded RC columns subjected to the combination of impact and blast loads", Eng. Struct., 219, 110924. https://doi.org/10.1016/j.engstruct.2020.110924   DOI
221 Han, X., Chen, N., Yan, J., Liu, J., Liu, M. and Karellas, S. (2019), "Thermodynamic analysis and life cycle assessment of supercritical pulverized coal-fired power plant integrated with No. 0 feedwater pre-heater under partial loads", J. Cleaner Product., 233, 1106-1122. https://doi.org/10.1016/j.jclepro.2019.06.159   DOI
222 Ghassemieh, M. and Bahadori, A. (2015), "Seismic evaluation of a steel moment frame with cover plate connection considering flexibility by component method", Proceedings of the 2015 world congress on Advances in Structural Engineering and Mechanics, Incheon, Korea.
223 Chen, Y., Li, J., Lu, H. and Yan, P. (2021b), "Coupling system dynamics analysis and risk aversion programming for optimizing the mixed noise-driven shale gas-water supply chains", J. Cleaner Product., 278, 123209. https://doi.org/10.1016/j.jclepro.2020.123209   DOI
224 Qian, J., Feng, S., Tao, T., Hu, Y., Li, Y., Chen, Q. and Zuo, C. (2020b), "Deep-learning-enabled geometric constraints and phase unwrapping for single-shot absolute 3D shape measurement", APL Photonics, 5(4), 046105. https://doi.org/10.1063/5.0003217   DOI
225 Gao, N., Wu, J.H., Yu, L. and Hou, H. (2016), "Ultralow frequency acoustic bandgap and vibration energy recovery in tetragonal folding beam phononic crystal", Int. J. Modern Phys. B, 30(18), 1650111. https://doi.org/10.1142/S0217979216501113   DOI
226 Chen, F., Zhong, Y., Gao, X., Jin, Z., Wang, E., Zhu, F., Shao, X. and He, X. (2021a), "Non-uniform model of relationship between surface strain and rust expansion force of reinforced concrete."
227 Cheng, H. and Liu, Y. (2020), "An improved RSU-based authentication scheme for VANET", J. Internet Technol., 21(4), 1137-1150.
228 Cheng, X., He, L., Lu, H., Chen, Y. and Ren, L. (2016), "Optimal water resources management and system benefit for the Marcellus shale-gas reservoir in Pennsylvania and West Virginia", J. Hydrol., 540, 412-422. https://doi.org/10.1016/j.jhydrol.2016.06.041   DOI
229 Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., Int. J., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141   DOI
230 Deng, Y., Zhang, T., Sharma, B.K. and Nie, H. (2019), "Optimization and mechanism studies on cell disruption and phosphorus recovery from microalgae with magnesium modified hydrochar in assisted hydrothermal system", Sci. Total Environ., 646, 1140-1154. https://doi.org/10.1016/j.scitotenv.2018.07.369   DOI
231 Zhu, L., Kong, L. and Zhang, C. (2020), "Numerical study on hysteretic behaviour of horizontal-connection and energy-dissipation structures developed for prefabricated shear walls", Appl. Sci., 10(4), 1240. https://doi.org/10.3390/app10041240   DOI
232 Chen, Y., He, L., Guan, Y., Lu, H. and Li, J. (2017), "Life cycle assessment of greenhouse gas emissions and water-energy optimization for shale gas supply chain planning based on multi-level approach: Case study in Barnett, Marcellus, Fayetteville, and Haynesville shales", Energy Convers. Manage., 134, 382-398. https://doi.org/10.1016/j.enconman.2016.12.019   DOI
233 Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L. S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020b), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., Int. J., 35(2), 187-197. https://doi.org/10.12989/scs.2020.35.2.187   DOI
234 Lv, Z. and Kumar, N. (2020), "Software defined solutions for sensors in 6G/IoE", Comput. Commun., 153, 42-47. https://doi.org/10.1016/j.comcom.2020.01.060   DOI
235 Zuo, C., Sun, J., Li, J., Zhang, J., Asundi, A. and Chen, Q. (2017), "High-resolution transport-of-intensity quantitative phase microscopy with annular illumination", Scientif. Reports, 7(1), 7654. https://doi.org/10.1038/s41598-017-06837-1   DOI
236 Li, X., Zhang, R., Zhang, X., Zhu, P. and Yao, T. (2020c), "Silver-Catalyzed Decarboxylative Allylation of Difluoroarylacetic Acids with Allyl Sulfones in Water", Chem. - Asian J., 15(7), 1175-1179. https://doi.org/10.1002/asia.202000059   DOI
237 Afrazi, M., Yazdani, M. and Fakhimi, A. (2017a), "The numerical study of effect of an oversize particle on the shear strength of sand in direct shear test", Proceedings of the 4th International Conference on Recent Innovations in Civil Engineering, Architecture, and Urban Palnning.