Browse > Article
http://dx.doi.org/10.12989/sss.2020.25.6.657

A novel multistage approach for structural model updating based on sensitivity ranking  

Jiang, Yufeng (Shandong Provincial Key Laboratory of Ocean Engineering, Ocean University of China)
Li, Yingchao (College of Civil Engineering, Ludong University)
Wang, Shuqing (Shandong Provincial Key Laboratory of Ocean Engineering, Ocean University of China)
Xu, Mingqiang (Shandong Provincial Key Laboratory of Ocean Engineering, Ocean University of China)
Publication Information
Smart Structures and Systems / v.25, no.6, 2020 , pp. 657-668 More about this Journal
Abstract
A novel multistage approach is developed for structural model updating based on sensitivity ranking of the selected updating parameters. Modal energy-based sensitivities are formulated, and maximum-normalized indices are designed for sensitivity ranking. Based on the ranking strategy, a multistage approach is proposed, where these parameters to be corrected with similar sensitivity levels are updated simultaneously at the same stage, and the complete procedure continues sequentially at several stages, from large to small, according to the predefined levels of the updating parameters. At every single stage, a previously developed cross model cross mode (CMCM) method is used for structural model updating. The effectiveness and robustness of the multistage approach are investigated by implementing it on an offshore structure, and the performances are compared with non-multistage approach using numerical and experimental vibration information. These results demonstrate that the multistage approach is more effective for structural model updating of offshore platform structures even with limited information and measured noise. These findings serve as a preliminary strategy for structural model updating of an offshore platform in service.
Keywords
multistage; sensitivity ranking; model updating; CMCM;
Citations & Related Records
Times Cited By KSCI : 9  (Citation Analysis)
연도 인용수 순위
1 Wang, T. and Wu, B. (2014), "Model updating with constrained unscented Kalman filter for hybrid testing", Smart. Struct. Syst., Int. J., 14(6), 1105-1129. https://doi.org/10.12989/sss.2014.14.6.1105   DOI
2 Wang, S.Q., Li, Y.C. and Li, H.J. (2015), "Structural model updating of an offshore platform using cross model cross mode method: an experimental study", Ocean. Eng., 97, 57-64. https://doi.org/10.1016/j.oceaneng.2015.01.007   DOI
3 Banan, M.R. and Huelmstad, K.D. (1994), "Parameter estimation of structures from static response. I: computational aspects", J. Struct. Eng., 120(11), 3243-3258. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:11(3243)   DOI
4 Bayraktar, A., Altunisik, A.C., Sevim, B. and Turker, T. (2010), "Finite element model updating of Komurhan highway bridge based on experimental measurements", Smart. Struct. Syst., Int. J., 6(4), 373-388. https://doi.org/10.12989/sss.2010.6.4.373   DOI
5 Cheng, L., Xie, H.C., Spencer, B.F.J. and Giles, R.K. (2009), "Optimized finite element model updating method for damage detection using limited sensor information", Smart. Struct. Syst., Int. J., 5(6), 681-697. https://doi.org/10.12989/sss.2009.5.6.681   DOI
6 Chung, T.T., Cho, S., Yun, C.B. and Sohn, H. (2012), "Finite element model updating of Canton Tower using regularization technique", Smart. Struct. Syst., Int. J., 10(4-5), 459-470. https://doi.org/10.12989/sss.2012.10.4_5.459   DOI
7 Xu, M.Q., Wang, S.Q. and Jiang, Y.F. (2019), "Iterative two-stage approach for identifying structural damage by combining the modal strain energy decomposition method with the multiobjective particle swarm optimization algorithm", Struct. Control. Health. Monit., 26(2), stc-2301. https://doi.org/10.1002/stc.2301
8 Yuan, Z.X., Liang, P., Silva, T., Yu, K.P. and Mottershead, J.E. (2019), "Parameter selection for model updating with global sensitivity", Mech. Syst. Signal. Pr., 115, 483-496. https://doi.org/10.1016/j.ymssp.2018.05.048   DOI
9 Zhang, D.W. and Wei, F.S. (1999), Model Updating and Damage Detection, Science Press, Beijing, China.
10 Doebling, S.W., Farrar, C.R., Prime, M.B. and Shevitz, D.W. (1998), "A summary review of damage identification methods that examine changes in dynamic properties", Shock Vib. Digest, 30(2), 91-105. https://doi.org/10.1177/058310249803000201   DOI
11 Ewins, D.J. (2000), Modal Testing: Theory, Practice and Application, (2nd Edition), Research Studies Press, London, UK.
12 Fan, W. and Qiao, P.Z. (2011), "Vibration-based damage identification methods: a review and comparative study", Struct. Health. Monit., 10(1), 83-111. https://doi.org/10.1177/1475921710365419   DOI
13 Fox, R. and Kapoor, M. (1968), "Rate of change of eigenvalues and eigenvectors", AIAA. J., 6(12), 2426-2429. https://doi.org/10.2514/3.5008   DOI
14 Friswell, M.I. and Mottershead, J.E. (1995), Finite element model updating in structural dynamics, Kluwer Academic, Norwell, MA, USA.
15 Hu, S.L.J. and Li, H.J. (2007), "Simultaneous mass, damping, and stiffness updating for dynamic systems", AIAA. J., 45(10), 2529-2537. https://doi.org/10.2514/1.28605   DOI
16 Hu, S.L.J., Li, H.J. and Wang, S.Q. (2006), "Cross-modal strain energy method for estimating damage severity", J. Eng. Mech., 132(4), 429-437. https://doi.org/10.1061/(ASCE)0733-9399(2006)132:4(429)   DOI
17 Hu, S.L.J., Li, H.J. and Wang S.Q. (2007), "Cross model cross mode method for model updating", Mech. Syst. Signal. Pr., 21(4), 1690-1703. https://doi.org/10.1016/j.ymssp.2006.07.012   DOI
18 Li, Y.C, Wang, S.Q., Zhang, M. and Zheng, C.M. (2016), "An improved modal strain energy method for damage detection in offshore platform structures", J. Marine. Sci. Appl., 15(2), 182-192. https://doi.org/10.1007/s11804-016-1350-1   DOI
19 Liang, Y.B., Feng, Q., Li, H. and Jiang, J. (2019), "Damage detection of shear buildings using frequency-change-ratio and model updating algorithm", Smart. Struct. Syst., Int. J., 23(2), 107-122. https://doi.org/10.12989/sss.2019.23.2.107
20 Liu, K., Yan, R.J. and Guedes Soares, C. (2018), "An improved model updating technique based on modal data", Ocean. Eng., 154, 277-287. https://doi.org/10.1016/j.oceaneng.2018.02.011   DOI
21 Messina, A., Williams, E.J. and Contursi, T. (1998), "Structural damage detection by a sensitivity and statistical-based method", J. Sound. Vib., 216(5), 791-808. https://doi.org/10.1006/jsvi.1998.1728   DOI
22 Modak, S.V., Kundra, T.K. and Nakra, B.C. (2002), "Comparative study of model updating methods using simulated experimental data", Comput. Struct., 80(5-6), 437-447. https://doi.org/10.1016/s0045-7949(02)00017-2   DOI
23 Ni, P.H. and Ye, X.W. (2019), "Nonlinear finite element model updating with a decentralized approach", Smart. Struct. Syst., Int. J., 24(6), 683-692. https://doi.org/10.12989/sss.2019.24.6.683
24 Perez, J.E.R., Rodriguez, R. and Vazquez-Hernandez, A.O. (2017), "Damage detection in offshore jacket platforms with limited modal information using the damage sub-matrices method", Mar. Struct., 55, 78-103. https://doi.org/10.1016/j.marstruc.2017.05.004   DOI
25 Song, W., Hayati, S. and Zhou, S.L. (2017), "Real-time model updating for magnetorheological damper identification: an experimental study", Smart. Struct. Syst., Int. J., 20(5), 619-636. https://doi.org/10.12989/sss.2017.20.5.619
26 Viero, P.F. and Roitman, N. (1999), "Application of some damage identification methods in offshore platforms", Mar. Struct., 12(2), 107-126. https://doi.org/10.1016/s0951-8339(99)00007-6   DOI
27 Villalba, J.D. and Laier, J.E. (2012), "Localizing and quantifying damage by means of a multi-chromosome genetic algorithm", Adv. Eng. Softw., 50(1), 150-157. https://doi.org/10.1016/j.advengsoft.2012.02.002   DOI
28 Wang, S.Q. (2014), "Model updating and parameters estimation incorporating flexible joints and boundary conditions", Inverse. Probl. Sci. En., 22(5), 727-745. https://doi.org/10.1080/17415977.2013.823413   DOI
29 Wang, S.Q. and Liu, F.S. (2010), "New accuracy indicator to quantify the true and false modes for eigensystem realization algorithm", Struct. Eng. Mech., 34(5), 625-634. https://doi.org/10.12989/sem.2010.34.5.625   DOI
30 Perera, R. and Ruiz, A. (2008), "A multistage FE updating procedure for damage identification in large-scale structures based on multiobjective evolutionary optimization", Mech. Syst. Signal. Pr., 22, 970-991. https://doi.org/10.1016/j.ymssp.2008.06.010   DOI
31 Li, H.J., Fang, H. and Hu, S.L.J. (2007), "Damage localization and severity estimate for three-dimensional frame structures", J. Sound. Vib., 301(3-5), 481-494. https://doi.org/10.1016/j.jsv.2006.08.042   DOI
32 Li, H.J., Wang, J.R. and Hu, S.L.J. (2008), "Using incomplete modal data for damage detection in offshore jacket structures", Ocean. Eng., 35, 1793-1799. https://doi.org/10.1016/j.oceaneng.2008.08.020   DOI
33 Oliveira, G., Magalhaes, F., Alvaro, C. and Caetano, E. (2018), "Vibration-based damage detection in a wind turbine using 1 year of data", Struct. Control. Health. Monit., 25(11), e2238. https://doi.org/10.1002/stc.2238   DOI