Browse > Article
http://dx.doi.org/10.12989/sss.2017.20.4.441

Fiber optic shape sensor system for a morphing wing trailing edge  

Ciminello, Monica (Adaptive Structures Division, the Italian Aerospace Research Centre, CIRA)
Ameduri, Salvatore (Adaptive Structures Division, the Italian Aerospace Research Centre, CIRA)
Concilio, Antonio (Adaptive Structures Division, the Italian Aerospace Research Centre, CIRA)
Dimino, Ignazio (Adaptive Structures Division, the Italian Aerospace Research Centre, CIRA)
Bettini, Paolo (Department of Aerospace Science and Technology)
Publication Information
Smart Structures and Systems / v.20, no.4, 2017 , pp. 441-450 More about this Journal
Abstract
The objective of this work is to present a conceptual design and the modelling of a distributed sensor system based on fiber optic devices (Fiber Bragg Grating, FBG), aimed at measuring span-wise and chord-wise variations of an adaptive (morphing) trailing edge. The network is made of two different integrated solutions for revealing deformations of the reference morphing structure. Strains are confined to typical values along the span (length) but they are expected to overcome standard ranges along the chord (width), up to almost 10%. In this case, suitable architectures may introduce proper modulations to keep the measured deformation low while preserving the information content. In the current paper, the designed monitoring system combines the use of a span-wise fiber reinforced patch with a chord-wise sliding beam. The two elements make up a closed grid, allowing the reconstruction of the complete deformed shape under the acceptable assumption that the transformation refers to regular geometry variations. Herein, the design logic and some integration issues are reported. Preliminary experimental test results are finally presented.
Keywords
adaptive structures; fiber optic sensors; shape reconstruction; morphing structures control;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Barret, R.M. and Barret, C.M. (2014), "Biomimetic FAAcertifiable, artificial muscle structures for commercial aircraft wings", Smart Mater. Struct., 23(7), 1-15.
2 Bettini, P., Di Landro, L., Airoldi, A., Baldi, A. and Sala, G. (2011), "Characterization of the interface between composites and embedded fiber optic sensors or nitinol wires", Proceedia Eng., 10, 3490-3496.   DOI
3 Bettini, P., Guerreschi, E. and Sala, G. (2015) "Development and experimental validation of a numerical tool for structural health and usage monitoring systems based on chirped grating sensors", Sensors J., 15(1), 1321-1341.
4 Bosboom, M.B., Van Wijngaarden, M.J., Evenblij, R., Bettini, P., Loutas, T., Kostopoulos, V., Habas, D., Tur, M., Gorbatov, N., Bergman, A., Ben Simon, U., Kressel, I., Koimtzoglou, C., Ciminello, M., Weisser, A. and Paget, C. (2016), "Ribbon tapes, shape sensors and hardware", Proceedings of the SARISTU Final Conference, Final Project Conference, Wolcken, P.C., Papadopoulos, M. (Eds.), Springer, Berlin, Germany.
5 Cassi, M. (2013), "SHM of composite patch repairs with the use of CFBG sensors", M.D. Dissertation, Politecnico di Milano, Milan, Italy, http://hdl.handle.net/10589/87602
6 Ciminello, M., Ameduri, S. and Flauto, D. (2013), "Design of FBG based-on sensor device for large displacement deformation", Proceedings of the IEEE113971IMOC2013, Rio de Janeiro, August.
7 Ciminello, M., Dimino, I., Ameduri, S. and Concilio, A. (2015), "Sensor network structural integration for shape reconstruction of Morphing Trailing Edge", Proceedings of the ICAST2015: 26th International Conference on Adaptive Structures and Technologies, Kobe, Japan, October.
8 Clean Sky (2016), http://www.cleansky.eu
9 Concilio, A., Dimino, I. and Pecora, R. (2016), "An Adaptive Trailing Edge for Large Commercial Aircraft", Proceedings of the ECCOMAS Congress 2016, 7th European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island (GK), 5-10 Giugno 2016.
10 Dimino, I., Ciminello, M., Concilio, A., Gratias, A., Schueller, M. and Pecora, R. (2015), "Control system design for a morphing wing trailing edge", Proceedings of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials, SMART 2015, Ponta Delgada (P), 3-6 June 2015.
11 Dimino, I., Flauto, D., Diodati, G., Concilio, A. and Pecora, R. (2014), "Actuation system design for a morphing wing trailing edge", Recent Patents Mech. Eng., 7(3), 138-148.   DOI
12 Dimino, I., Flauto, D., Diodati, G., Schuller, M. and Gratias, A. (2013), "Adaptive shape control architecture for morphing wings", Proceedings of the 6th ECCOMAS Conference on Smart Structures and Materials. SMART2013, Torino, June.
13 Evenblij, R., Kong, F., Ciminello, M., Dimino, I., Koimtzoglou, C. and Concilio, A., "Shape sensing for morphing structures using fibre Bragg grating technology", Proceedings of the SARISTU Final Conference, proceedings of the Final Project Conference, (Eds., Wolcken, P.C. and Papadopoulos, M.), Springer, Berlin, Germany.
14 Fausz, J. (2010), "Morphing Flight: Beyond Irreducible Complexity", Apologetics Press.
15 Jones, M.E., Duncan, P.G., Crotts, R., Shinpaugh, K., Grace, J.L., Murphy, K.A. and Claus, R.O. (1996) "Multiplexing optical fiber-based pressure sensors for smart wings", Proc. SPIE, Denver, CO, United States, August.
16 Peng, L., Yanju, L. and Jinsong L. (2014), "A new deformation monitoring method for a flexible variable camber wing based on fiber Bragg grating sensors", J. Intel. Mat. Syst. Str., 25(13) 1644-1653.   DOI
17 Ko, S., Bae, J. and Rho, J. (2014) "Development of a morphing flap using shape memory alloy actuators: the aerodynamic characteristics of a morphing flap", Smart Mater. Struct., 23(7), 1-21.
18 Micron Optics sm130 (2016), http://www.micronoptics.com/products/sensingsolutions/support
19 Pecora, R., Amoroso, F., Amendola, G. and Concilio, A. (2014), "Validation of a smart structural concept for wing-flap camber morphing", Smart Struct. Syst., 14(4), 659-679.   DOI
20 Pecora, R., Concilio, A., Dimino, I., Amoroso, F. and Ciminello, M. (2016), "Structural design of an adaptive wing trailing edge for enhanced cruise performance", Proceedings of the 24th AIAA/AHS Adaptive Structures Conference, AIAA SciTech, San Diego (CA-USA), 4-7 January 2016, DOI: http://dx.doi.org/10.2514/6.2016-1317.   DOI
21 Sala, G., Di Landro, L., Airoldi, A. and Bettini, P. (2015), "Fibre optics health monitoring for aeronautical applications", Meccanica, 50(10), 2547-2567.   DOI
22 SARISTU (2011), http://www.saristu.eu
23 Schorsch, O., Luhring, A., Nagel, C., Pecora, R. and Dimino, I. (2015), "Polymer based morphing skin for adaptive wings", Proceedings of the 7th ECCOMAS Thematic Conference on Smart Structures and Materials, SMART 2015, Ponte Delgada, Azores, June.
24 Timoshenko, S.P. and Goodier, J.N. (1970), Theory of Elasticity, (3rd Ed.), McGraw-Hill Book Inc., London, UK.