Browse > Article
http://dx.doi.org/10.12989/sss.2015.15.4.1085

Characterization of railway substructure using a hybrid cone penetrometer  

Byun, Yong-Hoon (School of Civil, Environmental and Architectural Engineering, Korea University)
Hong, Won-Taek (School of Civil, Environmental and Architectural Engineering, Korea University)
Lee, Jong-Sub (School of Civil, Environmental and Architectural Engineering, Korea University)
Publication Information
Smart Structures and Systems / v.15, no.4, 2015 , pp. 1085-1101 More about this Journal
Abstract
Changes in substructure conditions, such as ballast fouling and subgrade settlement may cause the railway quality deterioration, including the differential geometry of the rails. The objective of this study is to develop and apply a hybrid cone penetrometer (HCP) to characterize the railway substructure. The HCP consists of an outer rod and an inner mini cone, which can dynamically and statically penetrate the ballast and the subgrade, respectively. An accelerometer and four strain gauges are installed at the head of the outer rod and four strain gauges are attached at the tip of the inner mini cone. In the ballast, the outer rod provides a dynamic cone penetration index (DCPI) and the corrected DCPI (CDCPI) with the energy transferred into the rod head. Then, the inner mini cone is pushed to estimate the strength of the subgrade from the cone tip resistance. Laboratory application tests are performed on the specimen, which is prepared with gravel and sandy soil. In addition, the HCP is applied in the field and compared with the standard dynamic cone penetration test. The results from the laboratory and the field tests show that the cone tip resistance is inversely proportional to the CDCPI. Furthermore, in the subgrade, the HCP produces a high-resolution profile of the cone tip resistance and a profile of the CDCPI in the ballast. This study suggests that the dynamic and static penetration tests using the HCP may be useful for characterizing the railway substructure.
Keywords
cone tip resistance; dynamic cone penetration index; dynamic cone penetrometer; mini cone; railway substructure;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Al-Qadi, I.L., Xie, W., Roberts, R. and Leng, Z. (2010), "Data analysis techniques for GPR used for assessing railroad ballast in high radio-frequency environment", J. Transp. Eng.- ASCE, 136(4), 392-399.   DOI
2 Asli, C., Feng, Z.Q., Porcher, G. and Rincent, J.J. (2012), "Back-calculation of elastic modulus of soil and subgrade from portable falling weight deflectometer measurements", Eng. Struct., 34, 1-7.   DOI
3 ASTM C136 (2006), Sieve Analysis of Fine and Coarse Aggregates, Annual Book of ASTM Standard, 04.02, ASTM International, West Conshohocken, PA.
4 ASTM D4633 (2005), Standard test method for energy measurement for dynamic penetrometers, Annual Book of ASTM Standard, 04.08, ASTM International, West Conshohocken, PA.
5 Ayers, M.E. and Thompson, M.R. (1988), Rapid shear strength evaluation of in situ ballast/subballast materials, Department of Civil Engineering, University of Illinois at Urbana-Champaign, Technical report submitted to USA-CERL, June.
6 Bolton, M.D., Gui, M.W., Garnier, J., Corte, J.F., Bagge, G., Laue, J. and Renzi, R. (1999), "Centrifuge cone penetration tests in sand", Geotechnique, 49(4), 543-552.   DOI
7 Brough, M.J., Ghataora, G.S., Stirling, A.B., Madelin, K.B., Rogers, C.D.F. and Chapman, D.N. (2003), "Investigation of railway track subgrade. I: In-situ assessment", Proceedings of the ICE-Transport, 156(3), 145-154.   DOI
8 Brough, M.J., Ghataora, G.S., Stirling, A.B., Madelin, K.B., Rogers, C.D.F. and Chapman, D.N. (2006), "Investigation of railway track subgrade. Part 2: Case study", Proceedings of the ICE-Transport, 159(2), 83-92.   DOI
9 Byun, Y.H., Kim, J.H. and Lee, J.S. (2013), "Cone penetrometer with a helical-type outer screw rod for evaluation of the condition of a railway roadbed", J. Transp. Eng.- ASCE, 139(2), 115-122.   DOI
10 Byun, Y.H., Yoon, H.K., Kim, Y.S., Hong, S.S. and Lee, J.S. (2014), "Active layer characterization by instrumented dynamic cone penetrometer in Ny-alesund, Svalbard", Cold Region Science and Technology, Elsevier (Submitted).
11 Chrismer, S.M. and Li, D. (1997), "Cone penetrometer testing for track substructure design and assessment", Proceedings of the 6th International Heavy Haul Conference: Strategies Beyond 2000, South Africa.
12 Dai, S. and Kremer, C. (2006), Improvement and validation of Mn/DOT DCP specifications for aggregate base materials and select granular (No. MN/RC-2005-32).
13 Embacher, R.A. (2006), "Duration of spring thaw recovery for aggregate-surfaced roads", Transport. Res. Record: J. Transport. Res. Board, 1967(1), 27-35.   DOI
14 Hird, C.C. and Springman, S.M. (2006), "Comparative performance of 5cm2 and 10cm2 piezocones in a lacustrine clay", Geotechnique, 56(6), 427-438.   DOI
15 Hird, C.C., Johnson, P. and Sills, G.C. (2003), "Performance of miniature piezocones in thinly layered soils", Geotechnique, 53(10), 885-900.   DOI
16 Kim, B.I., Jeon, S.I. and Lee, M.S. (2006), "Comparison of Field Bearing Capacity Tests to Evaluate the Field Application of Dynamic Cone Penetrometer Test", Int J. Highway Eng., 8(4), 75-85.
17 Lee, C., Kim, R., Lee, J.S. and Lee, W. (2013), "Quantitative assessment of temperature effect on cone resistance", Bull. Eng. Geology Environ., 72, 3-13.   DOI
18 Kleyn, E.G. and Savage, P.F. (1982), "Application of the pavement DCP to determine the bearing properties and performance of road pavements", Proceedings of the International Symposium on Bearing Capacity of roads and Airfields, Trondheim, Norway, June.
19 Kurup, P.U. and Tumay, M.T. (1998), "Calibration of a miniature cone penetrometer for highway applications", Transport. Res. Record: J. Transport. Res. Board, 1614(1), 8-14.   DOI
20 Kurup, P.U. and Tumay, M.T. (1999), "Continuous intrusion miniature cone penetration test system for transportation applications", Transport. Res. Record: J. Transport. Res. Board, 1652(1), 228-235.   DOI
21 Lee, W.J., Shin, D.H., Yoon, H.K. and Lee, J.S. (2009), "Micro-cone penetrometer for more concise subsurface layer detection", Geotech. Test. J., 32(4), 358-364.
22 Mohammadi, S.D., Nikoudel, M.R., Rahimi, H. and Khamehchiyan, M. (2008), "Application of the dynamic cone penetrometer (DCP) for determination of the engineering parameters of sandy soils", Geology, 101, 195-203.
23 Selig, E.T., and Waters, J.M. (1994), Track geotechnology and substructure management, Thomas Telford.
24 Shin, D.H., Lee, C., Lee, J.S. and Lee, W. (2009), "Detection of smear zone using micro-cone and electrical resistance probe", Can. Geotech. J., 46(6), 719-726.   DOI
25 Siekmeier, J.A., Young, D. and Beberg, D. (2000), "Comparison of the dynamic cone penetrometer with other tests during subgrade and granular base characterization in Minnesota", ASTM Special Technical Publication, 1375, 175-188.
26 Webster, S.L., Brown, R.W. and Porter, J.R. (1994), Force projection site evaluation using the electric cone penetrometer (ECP) and the dynamic cone penetrometer (DCP) (No. WES/TR/GL-94-17), Army Engineer Waterways Experiment Station Vicksburg Ms Geotechnical Lab.
27 Siekmeier, J., Pinta, C., Merth, S., Jensen, J., Davich, P., Camargo, F. and Beyer, M. (2009), Using the dynamic cone penetrometer and light weight deflectometer for construction quality assurance (No. MN/RC 2009-12).
28 Skempton, A.W. (1986), "Standard penetration test procedures and the effects in sands of overburden pressure, relative density, particle size, ageing and overconsolidation", Geotechnique, 36(3), 425-447.   DOI
29 Sussmann, T.R., Selig, E.T. and Hyslip, J.P. (2003), "Railway track condition indicators from ground penetrating radar", NDT & E Int., 36(3), 157-167.   DOI
30 Yoon, H.K., Jung, S.H. and Lee, J.S. (2011), "Characterisation of subsurface spatial variability using a cone resistivity penetrometer", Soil Dyn. Earthq. Eng., 31 (7), 1064-1071.   DOI   ScienceOn
31 Yoon, H.K. and Lee, J.S. (2012), "Micro cones configured with full-bridge circuits", Soil Dyn. Earthq. Eng., 41, 119-127.