Browse > Article
http://dx.doi.org/10.12989/sss.2015.15.3.787

Damage identification of belt conveyor support structure using periodic and isolated local vibration modes  

Hornarbakhsh, Amin (Honarbakhsh Construction Office)
Nagayama, Tomonori (Department of Civil Engineering, the University of Tokyo)
Rana, Shohel (Department of Civil Engineering, the University of Tokyo)
Tominaga, Tomonori (Nippon Steel and Sumitomo Metal Corporation)
Hisazumi, Kazumasa (Nippon Steel and Sumitomo Metal Corporation)
Kanno, Ryoichi (Nippon Steel and Sumitomo Metal Corporation)
Publication Information
Smart Structures and Systems / v.15, no.3, 2015 , pp. 787-806 More about this Journal
Abstract
Due to corrosion, a large number of belt conveyors support structure in industrial plants have deteriorated. Severe corrosion may result in collapse of the structures. Therefore, practical and effective structural assessment techniques are needed. In this paper, damage identification methods based on two specific local vibration modes, named periodic and isolated local vibration modes, are proposed. The identification methods utilize the facts that support structures have many identical members repeated along the belt conveyor and there exist some local modes within a small frequency range where vibrations of these identical members are much larger than those of the other members. When one of these identical members is damaged, this member no longer vibrates in those modes. Instead, the member vibrates alone in an isolated mode with a lower frequency. A damage identification method based on frequencies comparison of these vibration modes and another method based on amplitude comparison of the periodic local vibration mode are explained. These methods do not require the baseline measurement records of undamaged structure. The methods is capable of detecting multiple damages simultaneously. The applicability of the methods is experimentally validated with a laboratory model and a real belt-conveyor support structure.
Keywords
damage Identification; belt conveyor; local vibration mode; periodic structure; sensitivity analysis;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Abaqus FEA (2015), Dassault Systemes Simulia Corp., Providence, RI, USA.
2 Chang, P.C., Flatau, A. and Liu, S.C. (2003), "Review paper: health monitoring of civil infrastructure", Struct. Health Monit., 2(3), 257-267.   DOI
3 Carden, E.P. and Fanning, P. (2004), "Vibration based condition monitoring: A review", Struct. Health Monit., 3(4), 355-377.   DOI
4 Doebling, S.W., Farar, C.R., Prime, M.B. and Shevitz, D.W. (1996), Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review, Los Alamos National Laboratory Report LA-13070-MS, USA.
5 Dinh, H.M., Nagayama, T. and Fujino, Y. (2012), "Structural parameter identification by use of additional known masses and its experimental application", Struct. Control Health Monit., 19(3), 436-450.   DOI
6 Ewins, D.J. (1985), Modal Testing: Theory and Practice, John wiley & sons, Inc., New York, USA.
7 Farrar, C.R. and Worden, K. (2007), "An Introduction to Structural Health Monitoring", Philos. T. R. Soc. A, 365, 303-315.   DOI
8 Gao, Y. and Spencer Jr., B.F. (2008), Structural Health Monitoring Strategies for Smart Sensor Networks, Newmark Structural Engineering Laboratory Report Series, No. 011, University of Illinois at Urbana-Champaign.
9 Harrison, A. (1980), "Non-destructive testing of industrial steel cord conveyor belts", Process. Eng., 6, 22-25.
10 Kim, H.M. and Bartkowicz, T.J. (2000), "An experimental study for damage detection using a hexagonal truss", J. Comput. Struct., 79(2), 173-182.
11 Law, S.S., Shi, Z.Y. and Zhang, L.M. (1998), "Structural damage detection from incomplete and noisy modal test data", J. Eng. Mech. - ASCE, 124(11), 1280-1288.   DOI
12 Mottershead, J.E. and Friswell, M.I. (1993), "Model updating in structural dynamics: a survey", J. Sound Vib., 167(2), 347-375.   DOI
13 Park, S. and Kim, Y.B. (2002), "Nondestructive damage detection in large structures via vibration monitoring", Electronic J. Struct. Eng., 2, 59-75.
14 Maurizi, M.J., Belles, P.M. and Martin, H.D. (2003), "An almost semi centennial formula for a simple approximation of the natural frequencies of Bernoulli-Euler beams", J. Sound Vib., 260,191-194.   DOI
15 Mazurkiewicz, D. (2008), "Analysis of the ageing impact on the strength of the adhesive sealed joints of conveyor belts", J. Mater. Process. Tech., 208(1-3), 477-485.   DOI
16 Ojalvo, I.U. and Pilon, D. (1988), "Diagnostics for geometrically locating structural math model errors from modal test data", Proceedings of the 29th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conference, Williamsburg, Virginia, April.
17 Ricci, S. (2000), "Best achievable modal eigenvectors in structural damage detection", J. Exper. Mech., 40(4), 425-429.   DOI
18 Ren, W.X. and De Roeck, G. (2002), "Structural damage identification using modal data. I: Simulation verification", J. Struct. Eng .- ASCE, 128, 87-95.   DOI
19 Salawu, O.S. (1997), "Detection of structural damage through changes in frequency: a review", Eng. Struct., 19(9), 718-723.   DOI
20 Shi, Z.Y. and Law, S.S. (1998), "Structural damage localization from modal strain energy change", J. Sound Vib., 218(5), 825-844.   DOI
21 Shi, Z.Y., Law, S.S. and Zhang, L.M. (2000), "Damage localization by directly using incomplete mode shapes", J. Eng. Mech. - ASCE, 126(6), 656-660.   DOI
22 Yang, H., Wu, Z. and Yan, Y. (2009), "A study on structural damage identification method based on model updating", Proceedings of the 2nd International Conference on Image and Signal Processing, IEEE, Tianjin, October.
23 Sohn, H., Farrar, C.R., Hemez, F.M., Shunk, D.D., Stinemates, D.W. and Nadler, B.R. (2004), A review of structural health monitoring literature: 1996-2001, Los Alamos National Laboratory Report LA-13976-MS, USA.