Browse > Article
http://dx.doi.org/10.12989/sss.2014.13.2.305

Active mass damper system using time delay control algorithm for building structure with unknown dynamics  

Jang, Dong-Doo (Department of Civil and Environmental Engineering, KAIST)
Jung, Hyung-Jo (Department of Civil and Environmental Engineering, KAIST)
Moon, Yeong-Jong (Construction Technology Center, Samsung C&T Corporation)
Publication Information
Smart Structures and Systems / v.13, no.2, 2014 , pp. 305-318 More about this Journal
Abstract
This paper numerically investigates the feasibility of an active mass damper (AMD) system using the time delay control (TDC) algorithm, which is one of the robust and adaptive control algorithms, for effectively suppressing the excessive vibration of a building structure under wind loading. Because of its several attractive features such as the simplicity and the excellent robustness to unknown system dynamics and disturbance, the TDC algorithm has the potential to be an effective control system for mitigating the vibration of civil engineering structures such as buildings and bridges. However, it has not been used for structural response reduction yet. In this study, therefore, the active control method combining an AMD system with the TDC algorithm is first proposed in order to reduce the wind-induced vibration of a building structure and its effectiveness is numerically examined. To this end, its stability analysis is first performed; and then, a series of numerical simulations are conducted. It is demonstrated that the proposed active structural control system can effectively reduce the acceleration response of the building structure.
Keywords
structural control; adaptive control; time delay control; unknown dynamics; vibration mitigation;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Chang, P.H., Kim, D.S. and Park, K.C. (1995), "Robust force/position control of a robot manipulator using time-delay control", Control Eng. Pract., 3(9), 1255-1264.   DOI   ScienceOn
2 Burl, J.B. (1999), Linear optimal control-H2 and H-infinity methods, Addison-Wesley.
3 Chang, J.C.H. and Soong, T.T. (1980), "Structural control using active tuned mass damper", J. Eng. Mech. - ASCE, 106(6), 1091-1098.
4 Chen, H.M., Tsai, K.H, Qi, G.Z., Yang, J.C.S. and Amini, F. (1995), "Neural networks for structure control", J. Comput. Civil Eng., 9(2), 168-176.   DOI   ScienceOn
5 Chin, S.M., Lee, C.O. and Chang, P.H. (1994), "An experimental study on the position control of an electrohydraulic servo system using time delay control", Control Eng. Pract., 2(1), 41-48.   DOI   ScienceOn
6 Datta, T.K. (2001), "A state-of-the-art review on active control of structures", ISET J. Earthq. Technol., 40(1), 1-17.
7 Deodatis, G. (1996), "Simulation of ergodic multivariate stochastic processes", J. Eng. Mech.- ASCE, 122(8), 778-787.   DOI   ScienceOn
8 Dyrbye, C. and Hansen, S.O. (1996), Wind loads on structures, John Wiley & Sons, Ltd.
9 Hsia, T.C. and Gao, L.S. (1990), "Robot manipulator control using decentralized linear time-invariant time-delayed controllers", Proceedings of the IEEE International Conference on Robotics and Automation, Cincinnati, OH, May.
10 Ioannou, P.A. and Sun, J. (1996), Robust adaptive control, Prentice Hall.
11 Mareels, I. and Poldman, J.W. (1996), Adaptive Systems: an introduction, Birkhauser.
12 Kaimal, J.C., Wyngaard, J.C., Izumi, Y. and Cote, O.R. (1972), "Spectral characteristics of surface-layer turbulence", Q. J. Roy. Meteor. Soc., 98(417), 563-589.   DOI
13 Kobori, T., Koshika, N., Yamada, K. and Ikeda, Y. (1991a), "Seismic-response-controlled structure with active mass driver system. Part 1: design", Earthq. Eng. Struct. D., 20(1), 133-149.   DOI
14 Shin, Y.H. and Kim, K.J. (2009), "Performance enhancement of pneumatic vibration isolation tables in low frequency range by time delay control", J. Sound Vib., 321(3-5), 537-553.   DOI   ScienceOn
15 Soong, T.T. (1990), Active structural control: theory and practice, Longman Scientific & Technical.
16 Spencer, B.F., Suhardjo, J. and Sain, M.K. (1994), "Frequency domain optimal control strategies for aseismic protection", J. Eng. Mech. - ASCE, 120(1), 135-159.   DOI   ScienceOn
17 Sun, J.O. and Kim, K.J. (2012), "Six-degree of freedom active pneumatic table based on time delay control technique", Proceedings of the Institution of Mechanical Engineers, Part 1; Journal of System and Control Engineering, 226(5), 638-650.
18 Shinozuka, M. and Deodatis, G. (1991), "Simulation of stochastic processes by spectral representation", Appl. Mech. Rev., 44(4), 191-204.   DOI
19 Teng, T.L., Peng C.P. and Chuang, C. (2000), "A study on the application of fuzzy theory to structural active control", Comput. Meth. Appl., 189(2), 439-448   DOI   ScienceOn
20 Youcef-Toumi, K. and Ito, O. (1987a), "Controller design for systems with unknown nonlinear dynamics", Proceedings of the American Control Conference, Minneapolis, MN, June.
21 Tewari, A. (2002), Modern control design, John Wiley & Sons, Ltd.
22 Yang, J.N. (1975), "Application of optimal control theory to civil engineering structures", J. Eng. Mech. - ASCE, 101(6), 818-838.
23 Yang, J.N., Wu, J.C., Agrawal, A.K. and Li, Z. (1994), Sliding mode control for seismic-excited linear and non-linear civil engineering structure, Technical Report NCEER-94-0017.
24 Youcef-Toumi, K. and Ito, O. (1987b), "Model reference control using time delay for nonlinear plants with unknown dynamics", in: Proceedings of the 10th Triennial World Congress of International Federation of Automatic Control World Congress, Munich, Germany, July.
25 Youcef-Toumi, K. and Ito. O. (1988), "A time delay controller for systems with unknown dynamics", Proceedings of the American Control Conference, Atlanta, GA, June.
26 Zhou, K., and Doyle, J.C. (1998), Essentials of robust control, prentice Hall.
27 Kobori, T., Koshika, N., Yamada, K. and Ikeda, Y. (1991b), "Seismic-response-controlled structure with active mass driver system. Part 2: Verification", Earthq. Eng. Struct. D., 20(1), 151-166.   DOI
28 Chang, P.H. and Lee, J.W. (1994), "An observer design for time-delay control and its application to dc servo motor", Control Eng. Pract., 2 (2), 263-270.   DOI   ScienceOn