Browse > Article
http://dx.doi.org/10.12989/sss.2013.12.3_4.427

Enhanced damage index method using torsion modes of structures  

Im, Seok Been (ENG center, Samsung C&T)
Cloudt, Harding C. (Zachry Department of Civil Engineering, Texas A&M University)
Fogle, Jeffrey A. (Zachry Department of Civil Engineering, Texas A&M University)
Hurlebaus, Stefan (Zachry Department of Civil Engineering, Texas A&M University)
Publication Information
Smart Structures and Systems / v.12, no.3_4, 2013 , pp. 427-440 More about this Journal
Abstract
A growing need has developed in the United States to obtain more specific knowledge on the structural integrity of infrastructure due to aging service lives, heavier and more frequent loading conditions, and durability issues. This need has spurred extensive research in the area of structural health monitoring over the past few decades. Several structural health monitoring techniques have been developed that are capable of locating damage in structures using modal strain energy of mode shapes. Typically in the past, bending strain energy has been used in these methods since it is a dominant vibrational mode in many structures and is easily measured. Additionally, there may be cases, such as pipes, shafts, or certain bridges, where structures exhibit significant torsional behavior as well. In this research, torsional strain energy is used to locate damage. The damage index method is used on two numerical models; a cantilevered steel pipe and a simply-supported steel plate girder bridge. Torsion damage indices are compared to bending damage indices to assess their effectiveness at locating damage. The torsion strain energy method is capable of accurately locating damage and providing additional valuable information to both of the structures' behaviors.
Keywords
damage index; bridge; structural health monitoring; pipe; torsion;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Cawley, P. and Adams, R.D. (1979), "The location of defects in structures from measurement of natural frequencies". J. Strain Anal. Eng., 14(2), 49-57.   DOI   ScienceOn
2 Pandey, A.K., Biswas, M. and Samman, M.M. (1991), "Damage detection from changes in curvature mode shapes", J. Sound Vib., 145(2), 321-332.   DOI   ScienceOn
3 Park, S., Stubbs, N., Bolton, R. and Choi, S. (2001), "Field verification of the damage index method in a concrete box-girder bridge via visual inspection", Comput. Aided Civil. Infrastruct. Eng., 16, 58-70.   DOI   ScienceOn
4 Rytter, A. and Kirkegaard, P. (1997), "Vibration based inspection using neural networks", Proceedings of the DAMAS '97, Structural Damage Assessment Using Advanced Signal Processing, University of Sheffield, UK, 97-108.
5 Samali, B., Li, J., Choi, F.C. and Crews., K. (2010). "Application of the damage index method for plate-like structures to timber bridges", Struct. Health Monit., 17(8), 849-871.   DOI   ScienceOn
6 Stanbridge, A.B., Khan, A.Z. and Ewins, D.J. (1997), Fault quantification in vibrating structures using a scanning laser doppler vibrometer, Structural Health Monitoring, Current Status and Perspectives, Stanford University, Palo Alto, California.
7 Stubbs, N. and Kim, J.T. (1996), "Damage localization in structures without baseline modal parameters", AIAA J. 34(8), 1644-1649.   DOI   ScienceOn
8 Toksoy, T. and Aktan, A.E. (1994), "Bridge-condition assessment by modal flexibility", Exp. Mech., 34, 271-278.   DOI   ScienceOn
9 Topole, K. (1997), "Damage evaluation via flexibility formulation", Proceedings of the SPIE 3043Smart Systems for Bridges, Structures, and Highways, May.
10 You, T. (2009), Iterative damage index method for structural health monitoring, Master Thesis, Texas A&M University, College Station, Texas, USA.
11 Zhang, L., Wang, T. and Tamura, Y. (2010), "A frequency-spatial domain decomposition (FSDD) method for operational modal analysis", Mech. Syst. Signal Pr., 24(5), 1127-1239.
12 Huang, Q., Gardoni, P. and Hurlebaus, S. (2009), "Probabilistic capacity models and fragility estimates for reinforced concrete columns incorporating NDT data", J. Eng. Mech. - ASCE, 135(12), 1384-1392.   DOI   ScienceOn
13 Kim, J.T. and Stubbs, N. (2002), "Improved damage identification method based on modal information", J. Sound Vib., 252, 223-238.   DOI   ScienceOn
14 Kim, B., Stubbs, N. and Park, T. (2005), "A new method to extract modal parameters using output-only responses", J. Sound Vib., 282, 215-230.   DOI   ScienceOn
15 Kim, B., Lee, J. and Lee, D.H. (2010), "Extracting modal parameters of high-speed railway bridge using the TDD technique", Mech. Syst. Signal Pr., 3, 707-720.
16 Kim, J.T., Park, J.H. and Lee, B.J. (2007). "Vibration-based damage monitoring in model plategirder bridges under uncertain temperature conditions", Eng. Struct., 29(7), 1354-1365   DOI   ScienceOn
17 Kim, J.T., Ryu, Y.S., Cho, H.M. and Stubbs, N. (2003), "Damage identification in beam-type structures: frequency-based method vs. mode-shape-based method", Eng. Struct., 25, 57-67.   DOI   ScienceOn
18 Lin, C. (1998), "Unity check method for structural damage detection", J. Spacecraft Rockets, 35(4), 577-579.   DOI   ScienceOn
19 Mazurek, D.F. and DeWolf, J.T. (1990), "Experimental study of bridge monitoring technique", J. Struct. Eng. - ASCE, 116(9), 2532-2549.   DOI
20 Mizuno, Y., Monroig, E. and Fujino, Y. (2008), "Wavelet decomposition-based approach for fast damage detection of civil structures", J. Infrastruct. Syst., 14(1), 27-32.   DOI   ScienceOn
21 Natke, H.G. and Cempel, C. (1997), "Model-aided diagnosis based on symptoms", Proceedings of the DAMAS '97, Structural Damage Assessment Using Advanced Signal Processing Procedures, University of Sheffield, UK, 363-375.
22 Pandey, A.K. and Biswas, M. (1994), "Damage detection in structures using changes in flexibility", J. Sound Vib., 169 (1), 3-17.   DOI   ScienceOn
23 Doebling, S.W. and Farrar, C.R. (1997), "Using statistical analysis to enhance modal-based damage identification", Proceedings of the DAMAS '97 Structural Damage Assessment Using Advanced Signal Processing, University of Sheffield, UK.
24 Chance, J., Tomlinson, G.R. and Worden, K. (1994), "A simplified approach to the numerical and experimental modeling of the dynamics of a cracked beam", Proceedings of the SPIE 12th International Modal Analysis Conference.
25 Choi, F., Li, J., Samali, B. and Crews, K. (2008), "Application of the modified damage index method to timber beams", Eng. Struct., 30, 1124-1145   DOI   ScienceOn
26 Choi, S., Park, S., Park, N.H. and Stubbs, N. "Improved fault quantification for a plate structure", J. Sound Vib., 297, 865-879.
27 Duffey, T.A., Doebling, S.W., Farrar, C.R., Baker, W.E. and Rhee, W.H. (2001), "Vibration-based damage identification in structures exhibiting axial and torsional response", J. Vib. Acoust., 123, 84-91.   DOI   ScienceOn
28 Ettouney, M., Daddazio, R., Hapij, A. and Aly, A. (1998), "Health monitoring of complex structures", Proceedings of the SPIE Smart Structures and Materials 1998: Industrial and Commercial Applications of Smart Structures Technologies.
29 Farrar, C.R. and Jauregui, D. (2001) Damage detection algorithms applied to experimental and numerical modal data from the 1-40 bridge, LA-13074-MS, Report of Los Alamos National Laboratory.
30 Farrar, C.R., Baker, W.E., Bell, T.M., Cone, K.M., Darling, T.W., Duffey, T.A., Eklund, A. and Migliori, A. (1994), Dynamic characterization and damage detection in the I-40 bridge over the Rio Grande, Los Alamos National Laboratory Report LA-12767-MS, Los Alamos National Laboratory, Los Alamos.
31 Ho, Y.K. and Ewins, D.J. (1999), "Numerical evaluation of the damage index", Proceedings of the 2nd International Workshop on Structural Health Monitoring, Stanford University, Palo Alto, California.