Browse > Article
http://dx.doi.org/10.12989/sss.2013.11.6.623

Active vibration suppression of a 1D piezoelectric bimorph structure using model predictive sliding mode control  

Kim, Byeongil (Powertrain CAE Team, Research & Development Division)
Washington, Gregory N. (The Henry Samueli School of Engineering, University of California)
Yoon, Hwan-Sik (Department of Mechanical Engineering, The University of Alabama)
Publication Information
Smart Structures and Systems / v.11, no.6, 2013 , pp. 623-635 More about this Journal
Abstract
This paper investigates application of a control algorithm called model predictive sliding mode control (MPSMC) to active vibration suppression of a cantilevered aluminum beam. MPSMC is a relatively new control algorithm where model predictive control is employed to enhance sliding mode control by enforcing the system to reach the sliding surface in an optimal manner. In previous studies, it was shown that MPSMC can be applied to reduce hysteretic effects of piezoelectric actuators in dynamic displacement tracking applications. In the current study, a cantilevered beam with unknown mass distribution is selected as an experimental test bed in order to verify the robustness of MPSMC in active vibration control applications. Experimental results show that MPSMC can reduce vibration of an aluminum cantilevered beam at least by 29% regardless of modified mass distribution.
Keywords
active vibration control; piezoceramic actuator; 1D piezoelectric bimorph structure; model predictive sliding mode control;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Suzuki, Y. and Kagawa, Y. (2010), "Active vibration control of a flexible cantilever beam using shape memory alloy actuators", Smart Mater. Struct., 19(8), 085014.   DOI   ScienceOn
2 Trindade, M.A. and Maio, C.E.B. (2008), "Multimodal passive vibration control of sandwich beams with shunted shear piezoelectric materials", Smart Mater. Struct., 17(5), 055015.   DOI   ScienceOn
3 Utkin, V., Guldner, J. and Shi, J. (1999), Sliding Mode Control in Electromechanical Systems, Taylor & Francis, Philadelphia, PA.
4 Wolff, K., Lahey, H.P., Nussmann, C., Nehl, J., Wimmel, R., Siebald, H., Fehren, H., Redaelli, M. and Naake, A. (2007), "Active noise cancellation at powertrain oil pan", Proceedings of the SAE 2007 Noise and Vibration Conference and Exhibition, SAE 2007-01-2422, St. Charles, May.
5 Wu, N. and Wang, Q. (2010), "Repair of vibrating delaminated beam structures using piezoelectric patches", Smart Mater. Struct., 19(3), 035027.   DOI   ScienceOn
6 Xie, S.L., Zhang, X.N., Zhang, J.H. and Yu, L. (2004), "H-inf robust vibration control of a thin plate covered with a controllable constrained damping layer", J. Vib. Control, 10, 115-134.
7 Yoon, H.S. and Washington, G. (2008), "Active vibration confinement of flexible structures using piezoceramic patch actuators", J. Intell. Mater. Syst. Struct., 19(2), 145-155.   DOI
8 Young, K.D., Utkin, V.I. and Ozguner, U. (1999), "A control engineer's guide to sliding mode control", IEEE T. Contr. Syst. T., 7, 328-342.   DOI   ScienceOn
9 Rajamohan, V., Sedaghati, R. and Rakheja, S. (2011), "Optimal vibration control of beams with total and partial MR-fluid treatments", Smart Mater. Struct., 20(11), 115016.   DOI   ScienceOn
10 Raju, B.B., Bianchini, E., Arata, J. and Roylance, M. (2005), "Improved performance of a baffle-less automotive muffler using piezoelectric materials", Proceedings of the SAE 2005 Noise and Vibration Conference and Exhibition, SAE 2005-01-2353, Traverse City, May.
11 Rao, A.K., Natesan, K., Bhat, S.M. and Ganguli, R. (2008), "Experimental demonstration of H-inf control based active vibration suppression in composite fin-tip of aircraft using optimally placed piezoelectric patch actuators", J. Intell.Mater. Syst. Struct.,19(6), 651-669.   DOI
12 Song, Z.G. and Li, F.M. (2011), "Active aeroelastic flutter analysis and vibration control of supersonic beams using the piezoelectric actuator/sensor pairs", Smart Mater. Struct., 20(5), 055013.   DOI   ScienceOn
13 Rossiter, J.A. (2003), Model-Based Predictive Control: A Practical Approach, CRC Press, London, UK.
14 Sethi, V. and Song, G. (2008), "Multimodal vibration control of a flexible structure using piezoceramic sensor and actuator", J. Intell. Mater. Syst. Struct., 19(5), 573-582.   DOI
15 Shevtsov, S., Soloviev, A., Acopyan, V. and Samochenko, I. (2009), "Helicopter rotor blade vibration control on the basis of active/passive piezoelectric damping approach", Proceedings of the PHYSCON 2009, Catania, September.
16 Suhariyono, A., Goo, N.S. and Park, H.C. (2008), "Use of lightweight piezo-composite actuators to suppress the free vibration of an aluminum beam", J. Intell. Mater. Syst. Struct., 19(1), 101-112.   DOI
17 Sun, H., Yang, Z., Li, K., Li, B., Xie, J., Wu, D. and Zhang, L. (2009), "Vibration suppression of a hard disk driver actuator arm using piezoelectric shunt damping with a topology-optimized PZT transducer", Smart Mater. Struct., 18(6), 065010.   DOI   ScienceOn
18 Lim, Y.Y. and Soh, C.K. (2011), "Fatigue life estimation of a 1D aluminum beam under mode-I loading using the electromechanical impedance technique", Smart Mater. Struct., 20(12), 125001.   DOI   ScienceOn
19 Mahmoodi, S.N. and Ahmadian, M. (2010), "Modified acceleration feedback for active vibration control of aerospace structures", Smart Mater. Struct., 19(6), 065015.   DOI   ScienceOn
20 Mahmoodi, S.N., Ahmadian, M. and Inman, D.J. (2010), "Adaptive modified positive position feedback for active vibration control of structures", J. Intell. Mater. Syst. Struct., 21(6), 571-580.   DOI
21 Neelakantan, V.A. (2005), Modeling, design, testing and control of a two-stage actuation mechanism using piezoelectric actuators for automotive applications, PhD Dissertation, Mechanical Engineering Department, The Ohio State University, Columbus, Ohio
22 Makihara, K. (2012), "Energy-efficiency enhancement and displacement-offset elimination for hybrid vibration control", Smart Struct. Syst., 10(3), 193-207.   DOI   ScienceOn
23 Marquardt, D. (1963), "An algorithm for least-squares estimation of nonlinear parameters", SIAM J. Appl. Math., 11, 431-441.   DOI   ScienceOn
24 Mirzaee, E., Eghtesad, M. and Fazelzadeh, S.A. (2011), "Trajectory tracking and active vibration suppression of a smart Single-Link flexible arm using a composite control design", Smart Struct. Syst., 7(2), 103-116.   DOI   ScienceOn
25 Neelakantan, V. and Washington, G.N. (2008), "Model predictive control of a two stage actuation system using piezoelectric actuators for controllable industrial and automotive brakes and clutches", J. Intell. Mater. Syst. Struct., 19, 845-857.   DOI
26 Nguyen, P.B. and Choi, S.B. (2010), "Open-loop position tracking control of a piezoceramic flexible beam using a dynamic hysteresis compensator", Smart Mater. Struct., 19(12), 125008.   DOI   ScienceOn
27 Preumont, A., Loix, N., Malaise, D. and Lecrenier, O. (1993), "Active damping of optical test benches with acceleration feedback", Machine Vib., 2, 119-124.
28 Beck, B.S., Cunefare, K.A., Ruzzene, M. and Collet, M. (2011), "Experimental analysis of a cantilever beam with a shunted piezoelectric periodic array", J. Intell. Mater. Syst. Struct., 22(11), 1177-1187.   DOI
29 Bjorck, A. (1996), Numerical methods for least squares problems, SIAM, Philadelphia, PA.
30 Bianchini, E. (2008), "Active vibration control of automotive like panels", Proceedings of the 2008 SAE BRASIL Noise and Vibration Conference, SAE 2008-36-0576, Florianopolis, March.
31 Cheng, T.H. and Oh, I.K. (2009), "Coil-based electromagnetic damper and actuator for vibration suppression of cantilever beams", J. Intell. Mater. Syst. Struct., 20(18), 2237-2247.   DOI
32 Fanson, J.L. and Caughey, T.K. (1990), "Positive position feedback control for large space structures", AIAA J., 28, 717-724.   DOI
33 Ji, H., Qiu, J., Badel, A. and Zhu, K. (2009), "Semi-active vibration control of a composite beam using an adaptive SSDV approach", J. Intell. Mater. Syst. Struct., 20(4), 401-412.   DOI
34 Kashani, R., Mazdeh, A. and Orzechowski, J. (2001), "Shunt piezo damping of a radiating panel", Proceedings of the 2001 Noise and Vibration Conference, SAE 2001-01-1576, Traverse City, May.
35 Kollar, I. (1993), "On frequency-domain identification of linear systems", IEEE T. Instrum. Meas., 42, 2-6.   DOI   ScienceOn
36 Lara-Prieto, V., Parkin, R., Jackson, M., Silberschmidt, V. and Kesy, Z. (2010), "Vibration characteristics of MR cantilever sandwich beams: experimental study", Smart Mater. Struct., 19(1), 015005.   DOI   ScienceOn
37 Li, K., Li, S. and Zhao, D. (2012), "Identification and suppression of vibrational energy in stiffened plates with cutouts based on visualization techniques", Struct.Eng. Mech., 43(3).