Browse > Article
http://dx.doi.org/10.12989/sss.2012.10.4_5.459

Finite element model updating of Canton Tower using regularization technique  

Truong, Thanh Chung (Department of Civil and Environmental Engineering, KAIST)
Cho, Soojin (Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign)
Yun, Chung Bang (School of Urban and Environmental Engineering, UNIST)
Sohn, Hoon (Department of Civil and Environmental Engineering, KAIST)
Publication Information
Smart Structures and Systems / v.10, no.4_5, 2012 , pp. 459-470 More about this Journal
Abstract
This paper summarizes a study for the modal analysis and model updating conducted using the monitoring data obtained from the Canton Tower of 610 m tall, which was established as an international benchmark problem by the Hong Kong Polytechnic University. Modal properties of the tower were successfully identified using frequency domain decomposition and stochastic subspace identification methods. Finite element model updating using the measurement data was further performed to reduce the modal property differences between the measurements and those of the finite element model. Over-fitting during the model updating was avoided by using an optimization scheme with a regularization term.
Keywords
Canton Tower; modal identification; finite element model updating; regularization;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
Times Cited By SCOPUS : 0
연도 인용수 순위
1 Ahmadian, H., Mottershead, J.E. and Friswell, M.I. (1998), "Regularisation methods for finite element model updating", Mech Syst Signal Pr., 12(1), 47-63.   DOI   ScienceOn
2 Boggs, P.T. and Tolle, J.W. (1995), "Sequential Quadratic Programming", Acta Numerica, 4, 1-51   DOI
3 Brincker, R., Zhang, L. and Andersen, P. (2001), "Modal identification of output-only systems using frequency domain decomposition", Smart Mater Struct, 10(3), 441-445.   DOI   ScienceOn
4 Friswell, M.I. and Mottershead, J.E. (1995), Finite element model updating in structural dynamics, Kluwer Academic Publishers.
5 Friswell, M.I., Mottershead, J.E. and Ahmadian, H. (2001), "Finite-element model updating using experimental test data: parametrization and regularization", Philos. T. R. Soc. A., 359(1778), 169-186.   DOI   ScienceOn
6 Hansen, P.C. and O'Leary, D. (1993), "The use of the L-curve in the regularization of discrete ill-posed problems", SIAM J. Sci. Comput., 14(6), 1487-1503.   DOI   ScienceOn
7 Ni, Y.Q., Xia, Y., Liao, W.Y. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct Control Health Monit., 16(1), 73-98.   DOI   ScienceOn
8 Ni, Y.Q., Xia, Y., Lin, W., Chen, W.H., and Ko, J.M. (2012), "SHM benchmark for high-rise structures: a reduced-order finite element model and field measurement data", Smart Struct Syst, in this issue.
9 Overschee, V.P. and De Moor, B. (1996), Subspace identification for linear systems, Kluwer Academic Publisher.
10 Zhang, Q.W., Chang, C.C., Chang, T.Y.P. (2000), "Finite element model updating for structures with parametric constraints", Earthq. Eng. Struct. D., 29(7), 927-944.   DOI   ScienceOn