1 |
Wu, S. (1996), "Piezoelectric shunts with a parallel R-L circuit for structural damping and vibration control", Proceedings of the SPIE Conf. on Damping and Isolation, Newport Beach, Bellingham, WA SPIE Optical Engineering Press.
|
2 |
Agnes, G.S. (1995), "Development of a modal model for simultaneous active and passive piezoelectric vibration suppression", J. Intel. Mat. Syst. Str., 6(4), 482-487.
DOI
ScienceOn
|
3 |
Clark, W.W. (2000), "Vibration control with state-switched piezoelectric materials", J. Intel. Mat. Syst. Struct., 11(4), 263-271.
DOI
|
4 |
Hagood, N.W. and Von Flotow, A. (1991), "Damping of structural vibrations with piezoelectric materials and passive electrical networks", J. Sound Vib., 146(2), 243-268.
DOI
ScienceOn
|
5 |
Han, J.H., Rew, K.H. and Lee, I. (1997), "An experimental study of active vibration control of composite structures with a piezo-ceramic actuator and a piezo-film sensor", Smart Mater. Struct., 6(549), 549-558.
DOI
|
6 |
Jaffe, B., Cook, Jr. W.R. and Jaffe, H. (1979), Piezoelectric ceramics, Academic Press, London.
|
7 |
Junkins, J.L. and Kim, Y. (1993), Introduction to dynamics and control of flexible structures: AIAA education series, Washington D.C.
|
8 |
Kim, I.H., Jung, H.J. and Koo, J.H. (2010), "Experimental evaluation of a self-powered smart damping system in reducing vibrations of a full-scale stay cable", Smart Mater. Struct., 19(11), 115027.
DOI
ScienceOn
|
9 |
Larson, G.D. and Cunefare, K.A. (2004), "Quarter-cycle switching control for switch-shunted dampers", Trans. ASME, J. Vib. Acoust., 126(2), 278-283.
DOI
|
10 |
Lee, D.O., Kang, L.H. and Han, J.H. (2011), "Active vibration isolation demonstration system using the piezoelectric unimorph with mechanically pre-stressed substrate", J. Intel. Mat. Syst. Struct., 22(13), 1399-1409.
DOI
ScienceOn
|
11 |
Liang, J. and Liao, W.H. (2012), "Improved design and analysis of self-powered synchronized switch interface circuit for piezoelectric energy harvesting systems", IEEE T. Ind. Electron., 59(4), 1950-1960.
DOI
|
12 |
Lim, S.C. and Choi, S.B. (2007a), "Vibration control of an HDD disk-spindle system utilizing piezoelectric bimorph shunt damping: I. dynamic analysis and modeling of the shunted drive", Smart Mater. Struct., 16(3), 891-900.
DOI
ScienceOn
|
13 |
Lim, S.C. and Choi, S.B. (2007b), "Vibration control of an HDD disk-spindle system using piezoelectric bimorph shunt damping: II. optimal design and shunt damping implementation", Smart Mater. Struct.,16(3), 901-908.
DOI
ScienceOn
|
14 |
Makihara, K., Onoda, J. and Minesugi, K. (2005), "Low-energy-consumption hybrid vibration suppression based on an energy-recycling approach", AIAA J., 43(8), 1706-1715.
DOI
ScienceOn
|
15 |
Makihara, K., Onoda, J. and Minesugi, K. (2006), "Behavior of piezoelectric transducer on energy-recycling semi-active vibration suppression", AIAA J., 44(2), 411-413.
DOI
ScienceOn
|
16 |
Makihara, K., Onoda, J. and Minesugi, K. (2007a), "Using tuned electrical resonance to enhance bang-bang vibration control", AIAA J., 45(2), 497-504.
DOI
ScienceOn
|
17 |
Morgan, R.A. and Wang, K.W. (1998), "An integrated active-parametric control a roach for active-passive hybrid piezoelectric network with variable resistance", J. Intel. Mat. Syst. Struct., 9(7), 564-573.
DOI
|
18 |
Makihara, K., Onoda, J. and Minesugi, K. (2007b), "Comprehensive assessment of semi-active vibration suppression including energy analysis", Trans. ASME, J. Vib. Acoust,., 129(1), 84-93.
DOI
|
19 |
Makihara, K., Takeuchi, S., Shimose, S. and Onoda, J. (2012), "Innovative digital self-powered autonomous system for multimodal vibration suppression", AIAA J., 50(9), 2004-2011.
DOI
ScienceOn
|
20 |
Morari, M. and Niederberger, D. (2006), "Autonomous switching circuit to suppress mechanical vibration", IEEE Ind. Electron., 53(1), 11-13.
|
21 |
Oh, H.U. and Choi, Y.J. (2011), "Enhancement of pointing performance by semi-active variable damping isolator with strategies for attenuating chattering effects", Sensors Actuat. A. - Phys., 165(2), 385-391.
DOI
ScienceOn
|
22 |
Onoda, J., Makihara, K. and Minesugi, K. (2003), "Energy-recycling semi-active method for vibration suppression with piezoelectric transducers", AIAA J., 41(4), 711-719.
DOI
ScienceOn
|
23 |
Park, K.H., Yoon, B.S., Nguyen, N.T., Goo, N.S., Kang, T.S. and Yoon, K.J. (2010), "Piezo-composite actuated control surface system for flying vehicle", Aircraft Eng. Aerospace Technol., 82(6), 372-375.
DOI
|
24 |
Qiu, J., Ji, H. and Zhu, K. (2009), "Semi-active vibration control using piezoelectric actuators in smart structures", Front. Mech. Eng. China, 4(3), 242-251.
|
25 |
Richard, C., Guyomar, D., Audigie, D. and Bassaler, H. (2000), "Enhanced semi passive damping using continuous switching of a piezoelectric device on an inductor", Proceedings of the SPIE Conf. on Passive Damping and Isolation, Newport Beach, Bellingham, WA SPIE Optical Engineering Press.
|
26 |
Sodano, H.A., Inman, D.J. and Park, G. (2004), "A review of power harvesting from vibration using piezoelectric materials", Shock Vib., 36(3), 197-205.
DOI
ScienceOn
|
27 |
Tang, J. and Wang, K.W. (2001), "Active-passive hybrid piezoelectric networks for vibration control comparisons and improvement", Smart Mater. Struct., 10(4), 794-806.
DOI
ScienceOn
|