A wireless guided wave excitation technique based on laser and optoelectronics |
Park, Hyun-Jun
(Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
Sohn, Hoon (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) Yun, Chung-Bang (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) Chung, Joseph (R&D Department, CyTroniq. Co. Ltd., Hoseo University) Kwon, Il-Bum (Center for Safety Measurement, Korea Research Institute of Standards and Science) |
1 | Achenbach, J.D. (2000), "Quantitative nondestructive evaluation", Int. J. Solids Struct., 37, 13-27. DOI ScienceOn |
2 | Castaings, M. and Hosten, B. (2001), "Lamb and SH waves generated and detected by air-coupled ultrasonic transducers in composite material plates", NDT & E Int., 34, 249-258. DOI ScienceOn |
3 | Celebi, M. (2002), Seismic instrumentation of buildings (with emphasis of federal buildings), Technical report No. 0-7460-68170. |
4 | Clark, M., Linnane, F., Sharples, S.D. and Somekh, M.G. (1998), "Frequency control in laser ultrasound with computer generated holography", Appl. Phys. Lett., 72(16), 1963-1965. DOI ScienceOn |
5 | Georgiou, H.M.S. and Mrad, R.B. (2004), "Experimental and theoretical assessment of PZT modeled as RC circuit subject to variable voltage excitations", Mechatronics, 14(6), 667-674. DOI ScienceOn |
6 | Ghosh, T., Kundu, T. and Karpur, P. (1998), "Efficient use of Lamb modes for detecting defects in large plates", Ultrasonics, 36, 791-801. DOI ScienceOn |
7 | Giurgiutiu, V. (2008), Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Elsevier Inc., London. |
8 | Greve, D.W., Sohn, H., Yue, C.P. and Oppenheim, I.J. (2007), "An Inductively coupled lamb wave transducer", IEEE Sens. J., 7(2), 295-301. DOI |
9 | Grisso, B.L. and Inman, D.J. (2008), "Autonomous hardware development for impedance-based health monitoring", Smart Struct. Syst., 4(3), 305-318. DOI |
10 | Guo, N. and Cawley, P. (1994), "Lamb wave reflection for the quick nondestructive evaluation of large composite laminates", Mater. Eval., 52, 404-411. |
11 | Guo, Z., Achenbach, J.D. and Krishnaswamy, S. (1997), "EMAT generation and laser detection of single Lamb wave modes", Ultrasonics, 35(6), 423-429. DOI ScienceOn |
12 | Kasap, S.O. (2001), Optoelectronics and Photonics: Principles and Practices, Prentice Hall, New Jersey. |
13 | Khare, R.P. (2004), Fiber Optics and Optoelectronics, Oxford University Press, India. |
14 | Kim, S.B. and Sohn, H. (2007), "Instantaneous reference-free crack detection based on polarization characteristics of piezoelectric materials", Smart Mater. Struct., 16(6), 2375-2387. DOI ScienceOn |
15 | Lee, H.S., Park, H.J., Sohn, H. and Kwon, I.B. (2009), "A Hybrid PZT/FBG guided wave generation and sensing system using a single laser source", Proceedings of the International Conference on Computational Design in Engineering, Seoul, Korea, November. |
16 | Lu, K.C., Loh, C.H., Yang, Y.S., Lynch, J.P. and Law, K.H. (2008), "Real-time structural damage detection using wireless sensing and monitoring system", Smart Struct. Syst., 4(6), 759-777. DOI |
17 | Lynch, J.P. and Loh, K.J. (2006), "A summary review of wireless sensors and sensor networks for structural health monitoring", Shock Vib. Digest, 38(2), 91-128. DOI ScienceOn |
18 | Park, H.J., Sohn, H., Yun, C.B., Chung, J. (2010), "Wireless guided wave-based monitoring using laser based actuation and sensing", Proceedings of the 6th Computational Stochastic Mechanics Conference, Rhodos, Greece, June. |
19 | Mascarenas, D.L., Todd, M.D., Park, G. and Farrar, C.R. (2007), "Development of an impedance-based wireless sensor node for structural health monitoring", Smart Mater. Struct., 16(6), 2137-2145. DOI ScienceOn |
20 | Moulin, E., Assaad, J., Delebarre, C., Kaczmarek, H. and Balageas, D. (1997), "Piezoelectric transducer embedded in a composite plate: application to Lamb wave generation", J. Appl. Phys., 82(5), 2049-2055. DOI ScienceOn |
21 | RF Connectors (1979), Radio-frequency connectors, Part 15: R.F. coaxial connectors with inner diameter of outer conductor 4.13 mm (0.163 in) with screw coupling - Characteristic impedance 50 ohms (Type SMA), International Electrotechnical Commission. |
22 | Raghavan, A. and Cesnik, E.S. (2007), "Review of guided-wave structural health monitoring", Shock Vib. Digest, 39(2), 91-114. DOI ScienceOn |
23 | Scruby, C.B. and Drain, L.E. (1990), Laser Ultrasonics: Techniques and Applications, Taylor & Francis Group, New York. |
24 | Smith, S.D. (1995), Optoelectronic Devices, Prentice Hall, New Jersey. |
25 | Sohn, H. (2003), "Active sensing based structural health monitoring for flaw detection in composite structures", KSCE J. Civ. Eng., 7(6), 637-646. DOI ScienceOn |
26 | Sohn, H., Park, G., Wait, J.R., Limback, N.P. and Farrar, C.R. (2004), "Wavelet-based active sensing for delamination detection in composite structures", Smart Mater. Struct., 13, 153-160. DOI ScienceOn |
27 | Sohn, H. and Lee, S.J. (2010), "Lamb wave tuning curve calibration for surface-bonded piezoelectric transducers", Smart Mater. Struct., 19, 1-12. |
28 | Su, Z., Ye, L. and Lu, Y. (2006), "Guided Lamb waves for identification of damage in composite structures: a review", J. Sound Vib., 295, 753-780. DOI ScienceOn |
29 | Svelto, O. (1982), Principles of Lasers, Plenum, New York. |
30 | Wang, L. and Yuan, F.G. (2007), "Active damage localization technique based on energy propagation of Lamb waves", Smart Struct. Syst., 3(2), 201-217. DOI |
31 | Wilson, J. and Hawkes, J. (1998), Optoelectronics: An introduction, Prentice Hall, New Jersey |
32 | Yeatman, E.M. (2009), "Energy harvesting-small scale energy production from ambient sources", Proceedings of the SPIE, the International Society for Optical Engineering, San Diego CA, USA, March. |