Browse > Article
http://dx.doi.org/10.12989/scs.2022.42.6.791

Cyclic behavior of steel beam-to-column connections with novel strengthened angle components  

Kang, Lan (State Key Laboratory of Subtropical Building Science, South China University of Technology)
Zhang, Cheng (School of Civil Engineering and Transportation, South China University of Technology)
Publication Information
Steel and Composite Structures / v.42, no.6, 2022 , pp. 791-804 More about this Journal
Abstract
As a type of semi-rigid connection, the top and seat angle connections are popular in current structures owing to their good cyclic performance and simple erection. However, their stiffness and load bearing capacity are relatively insufficient. This study proposes two strengthening methods to further increase the stiffness and strength of bolted-angle joints while maintaining satisfactory energy dissipation capacity (EDC) and ductility. Cyclic loading tests were conducted on six joint specimens with different strengthened angle components. Based on the test results, the influence of the following important factors on the cyclic behavior of steel joint specimens was investigated: the position of the rib stiffeners (edge rib stiffeners and middle rib stiffener), steel strength grade of rib stiffeners (Q345 and Q690), and additional stiffeners or not. In addition, the finite element models of these specimens were built and validated through a comparison of experimental and numerical results. The stiffness and bearing capacity of the bolted-angle joints could be improved significantly by utilizing the novel strengthened joints proposed in this study. Moreover, this can be achieved with almost no increase in the amount of steel required, and the EDC of this joint could also satisfy the requirements of seismic codes from various countries.
Keywords
beam-to-column connection; cyclic test; finite element analysis; hysteresis behavior; strengthened angle components;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 Lu, X., Zhang, L., Cui, Y., Li, Y. and Ye, L. (2018), "Experimental and theoretical study on a novel dual-functional replaceable stiffening angle steel component", Soil Dynam. Earthq. Eng., 114, 378-391. http://dx.doi.org/10.1016/j.soildyn.2018.07.040.   DOI
2 Nazaralizadeh, H., Ronagh, H., Memarzadeh, P. and Behnamfar, F. (2020), "Cyclic performance of bolted end-plate RWS connection with vertical-slits", J. Construct. Steel Res., 173, 106236. http://dx.doi.org/10.1016/j.jcsr.2020.106236.   DOI
3 Shariati, M., Nguyen Thoi, T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. http://dx.doi.org/10.12989/scs.2019.31.5.427.   DOI
4 Hadianfard, M.A., Namjoo, M., Boroumand, M. and Akbarpoor, S. (2021), "Investigation of welded top and seat angle connections under column removal event", Steel Compos. Struct., 40(1), 121-138. http://dx.doi.org/10.12989/scs.2021.40.1.121.   DOI
5 Hasan, M.J., Al-Deen, S. and Ashraf, M. (2019), "Behaviour of top-seat double web angle connection produced from austenitic stainless steel", J. Construct. Steel Res., 155, 460-479. http://dx.doi.org/10.1016/j.jcsr.2018.12.015.   DOI
6 Hasan, M.J., Ashraf, M. and Uy, B. (2017), "Moment-rotation behaviour of top-seat angle bolted connections produced from austenitic stainless steel", J. Construct. Steel Res., 136, 149-161. http://dx.doi.org/10.1016/j.jcsr.2017.05.014.   DOI
7 Kang, L., Meng, L. and Lin, Y. (2020), "Experimental and numerical investigation of lateral torsional buckling behavior and capacity of welded Q460 beams", J. Construct. Steel Res., 172, 106166. https://doi.org/10.1016/j.jcsr.2020.106166.   DOI
8 GB50011-2010 (2010), Code for Seismic Design of Buildings, China Architecture Industry Press, Beijing, China.
9 Kong, Z. and Kim, S.E. (2017a), "Moment-rotation behavior of top-and seat-angle connections with double web angles", J. Construct. Steel Res., 128, 428-439. http://dx.doi.org/10.1016/j.jcsr. 2016.09.010   DOI
10 Kukreti, A.R. and Abolmaali, A.S. (1999), "Moment-rotation hysteresis behavior of top and seat angle steel frame connections", J. Struct. Eng., ASCE. 125(8), 810-820. http://dx.doi.org/10. 1061/(ASCE)0733-9445(1999)125:8(810).   DOI
11 GB/T228.1-2010 (2010), Metallic materials - Tensile testing - Part 1: Method of test at room temperature, State General Administration of the People's Republic of China for Quality Supervision and Inspection and Quarantine, Beijing, China.
12 Bayat, M. and Zahrai, S.M. (2017), "Seismic performance of mid-rise steel frames with semi-rigid connections having different moment capacity", Steel Compos. Struct., 25(1), 1-17. http://dx.doi.org/10.12989/scs.2017.25.1.001.   DOI
13 Bui, V.-T., Vu, Q.-V., Truong, V.-H. and Kim, S.-E. (2021), "Fully nonlinear inelastic analysis of rectangular CFST frames with semi-rigid connections", Steel Compos. Struct., 38(5), 497-521. http://dx.doi.org/10.12989/scs.2021.38.5.497.   DOI
14 Chen, S., Jiang, J. and Jia, L. (2018), "Numerical study on the performance of beam-to-concrete-filled steel tube column joint with adapter-bracket", Adv. Struct. Eng., 21(10), 1542-1552. http://dx.doi.org/10.1177/1369433217746345.   DOI
15 Jia, L.-J. and Kuwamura, H. (2015), "Ductile fracture model for structural steel under cyclic large strain loading", J. Construct. Steel Res., 106, 110-121. https://doi.org/10.1016/j.jcsr.2014.12.002.   DOI
16 Kang, L., Suzuki, M. and Ge, H. (2018), "A study on application of high strength steel SM570 in bridge piers with stiffened box section under cyclic loading", Steel Compos. Struct., 26(5), 583-594. http://dx.doi.org/10.12989/scs.2018.26.5.583.   DOI
17 GB50017-2017 (2017), Code for Design of Steel Structures, China Planning Press, Beijing, China.
18 AL-Fisalawi, R.K., AL-Hadithy, L.K. and Al-Kamal, M.K. (2021), "Performance of semi-rigid steel connections under monotonic and cyclic loadings: A review", IOP Conference Series: Mater. Sci. Eng., 1067, 012059. http://dx.doi.org/10.1088/1757-899X/1067/1/012059.   DOI
19 ANSI/AISC360-2010 (2010), Specifications for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Illinois, USA.
20 Cai, X., Pan, Z., Zhu, Y., Gong, N. and Wang, Y. (2021), "Experimental and numerical investigations of self-centering post-tensioned precast beam-to-column connections with steel top and seat angles", Eng. Struct., 226, 111397. http://dx.doi.org/10.1016/j.engstruct.2020.111397.   DOI
21 Yan, S., Rasmussen, K.J.R., Jiang, L., Zhu, C. and Zhang, H. (2020), "Experimental evaluation of the full-range behaviour of steel beam-to-column connections", Adv. Steel Construct., 16(1), 77-84. http://dx.doi.org/10.18057/IJASC.2020.16.1.9   DOI
22 Sharma, V., Shrimali, M.K., Bharti, S.D. and Datta, T.K. (2020), "Behavior of semi-rigid steel frames under near- and far-field earthquakes", Steel Compos. Struct., 34(5), 625-641. http://dx.doi.org/ 10.12989/scs.2020.34.5.625.   DOI
23 Kang, L., Wu, B., Liu, X. and Ge, H. (2021), "Experimental study on post-fire mechanical performances of high strength steel Q460", Adv. Struct. Eng., 24(12), 2791-2808. http://dx.doi.org/10.1177/13694332211010601.   DOI
24 Maali, M., Kilic, M. and Aydin, A.C. (2019), "Experimental behaviour of bolted connections with stiffeners", Steel Construct. Design Res., 12(2), 105-113. http://dx.doi.org/10.1002/stco. 201800010.   DOI
25 Nassani, D.E., Chikho, A.H. and Akgonen, A.I. (2017), "Semirigidity of cap plate and extended end plate connections", Steel Compos. Struct., 23(5), 493-499. http://dx.doi.org/10.12989/scs.2017.23.5. 493.   DOI
26 Rahmani, M. and Todorovska, M.I. (2021), "Structural health monitoring of a 32-storey steel-frame building using 50 years of seismic monitoring data", Earthq. Eng. Struct. Dynam., 50(6), 1777-1800. http://dx.doi.org/10.1002/eqe.3422.   DOI
27 Reinosa, J.M., Loureiro, A., Gutierrez, R. and Lopez, M. (2020), "Mechanical stiffness prediction of beam-to-column stiffened angle joints", J. Construct. Steel Res., 168, 105875. http://dx.doi.org/10.1016/j.jcsr.2019.105875.   DOI
28 Steneker, P., Wiebe, L. and Filiatrault, A. (2018), "Identifying critical locations for connection ductility in steel moment resisting frames", Key Eng. Mater., 763, 165-173. http://dx.doi.org/10.4028/ www.scientific.net/KEM.763.165.   DOI
29 Wang, P., Wang, Z., Pan, J., Li, B. and Wang, B. (2020), "Experimental study on seismic behavior of exterior composite beam-to-column joints with large size stiffened angles", Steel Compos. Struct., 37(1), 15-26. http://dx.doi.org/10.12989/scs.2020.37.1.015.   DOI
30 Wang, P., Pan, J., Wang, Z. and Chen, S. (2018), "Experimental and analytical behavior of stiffened angle joints", Steel Compos. Struct., 26(1), 67-78. http://dx.doi.org/10.12989/scs.2018.26.1.067.   DOI
31 Yang, B. and Tan, K.H. (2013), "Robustness of bolted-angle connections against progressive collapse: experimental tests of beam-column joints and development of component-based models", J. Struct. Eng., ASCE. 139(9), 1498-1514. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.000 0749.   DOI
32 Toghroli, A., Nasirianfar, M.S., Shariati, A., Khorami, M., Paknahad, M., Ahmadi, M., Gharehaghaj, B. and Zandi, Y. (2020), "Analysis of extended end plate connection equipped with SMA bolts using component method", Steel Compos. Struct., 36(2), 213-228. http://dx.doi.org/10.12989/scs.2020.36.2.213.   DOI
33 Kong, Z. and Kim, S.E. (2017b), "Numerical estimation for initial stiffness and ultimate moment of top-seat angle connections without web angle", J. Struct. Eng., ASCE. 143(10), 04017138. http://dx.doi.org/10.1061/(ASCE)ST.1943-541X.0001875.   DOI