Browse > Article
http://dx.doi.org/10.12989/scs.2022.42.2.191

Experimental investigation of natural bond behavior in circular CFTs  

Naghipour, Morteza (Department of Civil Engineering, Babol Noshirvani University of Technology)
Khalili, Aidin (Department of Civil Engineering, Babol Noshirvani University of Technology)
Hasani, Seyed Mohammad Reza (Department of Civil Engineering, Babol Noshirvani University of Technology)
Nematzadeh, Mahdi (Department of Civil Engineering, Faculty of Engineering and Technology, University of Mazandaran)
Publication Information
Steel and Composite Structures / v.42, no.2, 2022 , pp. 191-207 More about this Journal
Abstract
Undoubtedly, the employment of direct bond interaction between steel and concrete is preceding the other mechanisms because of its ease of construction. However, the large scatter in the experimental data about the issue has hindered the efforts to characterize bond strength. In the following research, the direct bond interaction and bond-slip behavior of CFTs with circular cross-section were examined through repeated load-reversed push-out tests until four cycles of loading. The influence of different parameters including the diameter of the tube and the use of shear tabs were assessed. Moreover, the utilization of expansive concrete and external spirals was proposed and tested as ways of improving bond strength. According to the results section dimensions, tube slenderness, shrinkage potential of concrete, interface roughness and confinement are key factors in a natural bond. Larger diameters will lead to a considerable drop in bond strength. The use of shear tabs by their associated bending moments increases the bond stress up to eight times. Furthermore, employment of external spirals and expansive concrete have a sensible effect on enhancing bonds. Macro-locking was also found to be the main component in achieving bond strength.
Keywords
concrete-filled steel tube (CFT); load transfer; bond strength; push-out test; macro-locking;
Citations & Related Records
Times Cited By KSCI : 8  (Citation Analysis)
연도 인용수 순위
1 Chen, L., Dai, J., Jin, Q., Chen, L. and Liu, X. (2015), "Refining bond-slip constitutive relationship between checkered steel tube and concrete", Construct. Build. Mater., 79, 153-164. https://doi.org/10.1016/j.conbuildmat.2014.12.058.   DOI
2 Denavit, M.D. and Hajjar, J.F. (2014), Characterization of Behavior of Steel-Concrete Composite Members and Frames with Applications for Design, Report No. NSEL-034, Newmark Structural Laboratory Report Series (ISSN 1940-9826), Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, Urbana, Illinois, August, 683 U.S.A.
3 Dong, H., Chen, X., Cao, W. and Zhao, Y. (2020), "Bond-slip behavior of large high-strength concrete-filled circular steel tubes with different constructions", J. Construct. Steel Res., 167, 105951. https://doi.org/10.1016/j.jcsr.2020.105951.   DOI
4 Evirgen, B., Tuncan, A. and Taskin, K. (2014), "Structural behavior of concrete filled steel tubular sections (CFT/CFSt) under axial compression", Thin-Wall. Struct., 80, 46-56. https://doi.org/10.1016/j.tws.2014.02.022.   DOI
5 Gourley, B.C., Tort, C., Hajjar, J.F. and Schiller, P.H. (2001), A Synopsis of Studies of the Monotonic and Cyclic Behavior of Concrete-Filled Steel Tube Beam-Columns, Structural Engineering Report No. ST-01-4, Department of Civil Engineering, University of Minnesota, Minneapolis, Minnesota, Version 3.0, December, 262. U.S.A.
6 Haghinejada, A. and Nematzadeh, M. (2016). "Three-dimensional finite element analysis of compressive behavior of circular steel tube-confined concrete stub columns by new confinement relationships", Latin American Journal of Solids and Structures, 13, 916-944.   DOI
7 Karimi, A., Nematzadeh, M. and Mohammad-Ebrahimzadeh-Sepasgozar, S. (2020), "Analytical post-heating behavior of concrete-filled steel tubular columns containing tire rubber", Comput. Concrete, 26(6), 467-482.   DOI
8 Qu, X., Chen, Z., Nethercot, D.A., Gardner, L. and Theofanous, M. (2013), "Load-reversed push-out tests on rectangular CFST columns", J. Construct. Steel Res., 81, 35-43. https://doi.org/10.1061/(ASCE)0733-9445(1999)125:5(477).   DOI
9 Virdi, K.S. and Dowling, P.J. (1980), "Bond strength in concrete filled steel tubes", IABSE Proceeding City Univ., Dep. Civil Eng., London, United Kingdom.
10 Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. http://dx.doi.org/10.12989/sss.2018.22.4.433.   DOI
11 Xu, C., Chengkui, H., Decheng, J. and Yuancheng, S. (2009), "Push-out test of pre-stressing concrete filled circular steel tube columns by means of expansive cement", Construct. Build. Mater., 23(1), 491-497. https://doi.org/10.1016/j.conbuildmat.2007.10.021.   DOI
12 Rahmani, Z., Naghipour, M. and Nematzadeh, M. (2021a), "Structural behavior of prestressed self-compacting concrete-encased concrete-filled steel tubes beams", Struct. Concrete, 22(4), 2011-2028.   DOI
13 ECS. (2004), Eurocode 4: EN 1994-1-2: 2004: Design of Composite Steel and Concrete Structures. Part1-1: General Rules-Structural Rules for Buildings, ECS Brussels, Belgium.
14 Shakir-Khalil, H. (1993), "Resistance of Concrete-Filled Steel Tubes to Pushout Forces", Struct. Eng., 71(13), 234-43.
15 Toghroli, A., Shariati, M., Rehan, M. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering, Zurich, Switzerland.
16 Aly, T., Elchalakani, M., Thayalan, P. and Patnaikuni, I. (2010), "Incremental collapse threshold for pushout resistance of circular concrete filled steel tubular columns", J. Construct. Steel Res., 66(1), 11-18. https://doi.org/10.1016/j.jcsr.2009.08.002.   DOI
17 Chen, Y., Feng, R., Shao, Y. and Zhang, X. (2017), "Bond-slip behaviour of concrete-filled stainless steel circular hollow section tubes", J. Construct. Steel Res., 130, 248-263. https://doi.org/10.1016/j.jcsr.2016.12.012.   DOI
18 Chitawadagi, M.V., Chandrashekhara Mattur, N. and Kulkarni., S. M. (2010), "Axial strength of circular concrete-filled steel tube columns-DOE approach", J. Construct. Steel Res., 66(10), 1248-1260. https://doi.org/10.1016/j.jcsr.2010.04.006.   DOI
19 Mohammadnejad, M., Naghipour, M., Nematzadeh, M. and Elyasi, M. (2020), "Experimental and analytical investigation of the effect of external pressure on compressive behavior of concrete-filled steel tube stub columns", Appl. Ocean Res., 100, 102152.   DOI
20 Mouli, M. and Khelafi, H. (2007), "Strength of short composite rectangular hollow section columns filled with lightweight aggregate concrete", Eng. Struct., 29(8), 1791-1797. https://doi.org/10.1016/j.engstruct.2006.10.003.   DOI
21 Rahmani, Z., Naghipour, M. and Nematzadeh, M. (2021b), "Parametric study on prestressed concrete-encased CFST subjected to bending using nonlinear finite element modeling", Asian J. Civil Eng., 22(3), 529-549.   DOI
22 Roeder, C.W, Lehman, D.E. and Thody, R. (2009), "Composite Action in CFT Components and Connections", AISC Eng. J., 47(4), 229-242.
23 Roeder, C.W., Cameron, B. and Brown, C.B. (1999), "Composite action in concrete filled tubes", J. Struct. Eng., 125(5), 477-484.   DOI
24 Shariati, M., Heirati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N.A. and Poi-Ngian, Sh. (2019a), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst, 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.   DOI
25 Bahrami, A. and Nematzadeh, M. (2021), "Bond behavior of lightweight concrete-filled steel tubes containing rock wool waste after exposure to high temperatures", Construct. Build. Mater., 300, 124039.   DOI
26 Shariati, M., Rafiei, Sh., Mehrabi, P., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariati, A., Trung, N.T., Salih, M.N.A. and Poi-Ngian, Sh. (2019b), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Construct., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225.   DOI
27 Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. http://dx.doi.org/10.12989/sss.2019.24.3.415.   DOI
28 Xue, J.Q., Briseghella, B. and Chen, B.C. (2012), "Effects of debonding on circular CFST stub columns", J. Construct. Steel Res., 69(1), 64-76. https://doi.org/10.1016/j.jcsr.2011.08.002.   DOI
29 Tao, Z., Song, T.Y., Uy, B. and Han, L.H. (2016), "Bond behavior in concrete-filled steel tubes", J. Construct. Steel Res., 120, 81-93. https://doi.org/10.1016/j.jcsr.2015.12.030.   DOI
30 Azad, S.K. and Uy, B. (2020), "Effect of concrete infill on local buckling capacity of circular tubes", J. Construct. Steel Res., 165, 105899. https://doi.org/10.1016/j.jcsr.2019.105899.   DOI
31 Kilpatrick, A.E. and Rangan, B.V. (1999), "Influence of Interfacial Shear Transfer on Behavior of Concrete-Filled Steel Tubular Columns", Struct. J., 96(4), 642-648.
32 Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. http://dx.doi.org/10.12989/sss.2019.23.2.207.   DOI
33 Memarzadeh, A. and Nematzadeh, M. (2021), "Axial compressive performance of steel reinforced fibrous concrete composite stub columns: Experimental and theoretical study", Structures, 34, 2455-2475.   DOI
34 Parsley, M.A. and Yura, J.A. (2000), Push-Out Behavior of Rectangular Concrete-Filled Steel Tubes. Special Publication, 196, 87-108. https://doi.org/10.14359/9998.
35 Naghipour, M., Yousefi, G. and Shariati, M. (2020), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding line", Steel Compos. Struct., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347.   DOI
36 Petrus, C., Hamid, H.A., Ibrahim, A. and Parke, G. (2010), "Experimental behaviour of concrete filled thin walled steel tubes with tab stiffeners", J. Construct. Steel Res., 66(7), 915-922. https://doi.org/10.1016/j.jcsr.2010.02.006.   DOI
37 Nematzadeh, M., Hajirasouliha, I., Haghinejad, A. and Naghipour, M. (2017), "Compressive behaviour of circular steel tube-confined concrete stub columns with active and passive confinement", Steel Compos. Struct., 24(3), 323-337.   DOI
38 Nematzadeh, M., Hosseini, S.A. and Ozbakkaloglu, T. (2021), "The combined effect of crumb rubber aggregates and steel fibers on shear behavior of GFRP bar-reinforced high-strength concrete beams", J. Build. Eng., 44, 102981.   DOI
39 Nematzadeh, M., Karimi, A. and Gholampour, A. (2020), "Pre-and post-heating behavior of concrete-filled steel tube stub columns containing steel fiber and tire rubber", Struct., 27, 2346-2364.   DOI
40 Denavit, M.D. (2012), Characterization of Behavior of Steel-Concrete Composite Members and Frames with Applications for Design. University of Illinois at Urbana-Champaign.