Browse > Article
http://dx.doi.org/10.12989/scs.2021.41.6.831

Moment-rotational analysis of soil during mining induced ground movements by hybrid machine learning assisted quantification models of ELM-SVM  

Dai, Bibo (School of Resources and Civil Engineering, Northeastern University)
Xu, Zhijun (School of Civil Engineering, Henan University of Technology)
Zeng, Jie (Chongqing Jianzhu College, Academy of Traffic and Municipal Engineering)
Zandi, Yousef (Department of Civil Engineering, Tabriz Branch, Islamic Azad University)
Rahimi, Abouzar (Department of Civil Engineering, Tabriz Branch, Islamic Azad University)
Pourkhorshidi, Sara (Civil Engineering Department, Sahand University of Technology)
Khadimallah, Mohamed Amine (Prince Sattam Bin Abdulaziz University, College of Engineering, Civil Engineering Department)
Zhao, Xingdong (School of Resources and Civil Engineering, Northeastern University)
El-Arab, Islam Ezz (Structural engineering, Faculty of engineering, Tanta University)
Publication Information
Steel and Composite Structures / v.41, no.6, 2021 , pp. 831-850 More about this Journal
Abstract
Surface subsidence caused by mining subsidence has an impact on neighboring structures and utilities. In other words, subsurface voids created by mining or tunneling activities induce soil movement, exposing buildings to physical and/or functional destruction. Soil-structure is evaluated employing probability distribution laws to account for their uncertainty and complexity to estimate structural vulnerability. In this study, to investigate the displacement field and surface settlement profile caused by mining subsidence, on the basis of a Winklersoil model, analytical equations for the moment-rotation response ofsoil during mining induced ground movements are developed. To define the full static moment-rotation response, an equation for the uplift-yield state is constructed and integrated with equations for the uplift- and yield-only conditions. The constructed model's findings reveal that the inverse of the factor of safety (x) has a considerable influence on the moment-rotation curve. The maximal moment-rotation response of the footing is defined by X = 0:6. Despite the use of Winkler model, the computed moment-rotation response results derived from the literature were analyzed through the ELM-SVM hybrid of Extreme Learning Machine (ELM) and Support Vector Machine (SVM). Also, Monte Carlo simulations are used to apply continuous random parameters to assess the transmission of ground motions to structures. Following the findings of RMSE and R2, the results show that the choice of probabilistic laws of input parameters has a substantial impact on the outcome of analysis performed.
Keywords
d ELM- SVM; induced ground; machine learning; moment rotation; mining; soil interaction;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Construct. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034.   DOI
2 Ahmed, M. and Iskander, M. (2011), "Analysis of tunneling-induced ground movements using transparent soil models", J. Geotech. Geoenviron. Eng., 137(5), 525-535. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000456.   DOI
3 Ahmed, M. and Iskander, M. (2012), "Evaluation of tunnel face stability by transparent soil models", Tunn. Underg. Space Technol., 27(1), 101-110. https://doi.org/10.1016/j.tust.2011.08.001.   DOI
4 Ali, S. (2012), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. https://doi.org/10.5897/IJPS11.1604.   DOI
5 Alzo'ubi, A.K. (2015), "The role of block ratio and layer thickness on rock slopes movement style", Int. J. Geomate, 8, 1271-1277. https://doi.org/10.21660/2015.16.4295.   DOI
6 Alzo'ubi, A.K. (2016), "Modeling yield propagation of jointed synthetic rock", In ISRM Int. Symposium-EUROCK 2016. OnePetro. https://doi.org/10.1201/9781315388502-17.   DOI
7 Alzo'ubi, A.K. (2018), "State of the art, reconstruction of damaged zones: transitory stresses effect and factors controlling rock mass stability", Int. J. Geomate, 14(41), 35-43
8 Ni, Q., Hird, C. and Guymer, I. (2010), "Physical modelling of pile penetration in clay using transparent soil and particle image velocimetry", Geotechnique, 60(2), 121-132. https://doi.org/10.1680/geot.8.P.052.   DOI
9 Nowroozi, V., Hashemolhosseini, H., Afrazi, M. and Kasehchi, E. (2021), "Optimum design for soil nailing to stabilize retaining walls using FLAC3D", J. Adv. Eng. Comput., 5(2), 108-124. http://dx.doi.org/10.25073/jaec.202152.329.   DOI
10 Petkovic, B., Agdas, A.S., Zandi, Y., Nikolic, I., Denic, N., Radenkovic, S.D., Almojil, S.F., Roco-Videla, A., Kojic, N. and Zlatkovic, D. (2021a), "Neuro fuzzy evaluation of circular economy based on waste generation, recycling, renewable energy, biomass and soil pollution", Rhizosphere, 19, 100418. https://doi.org/10.1016/j.rhisph.2021.100418.   DOI
11 Petkovic, B., Zandi, Y., Agdas, A.S., Nikolic, I., Denic, N., Kojic, N., Selmi, A., Issakhov, A., Milosevic, S. and Khan, A. (2021b), "Adaptive neuro fuzzy evaluation of energy and non- energy material productivity impact on sustainable development based on circular economy and gross domestic product", Business Strategy Environ.. https://doi.org/10.1002/bse.2878.   DOI
12 Qi, C., Xu, X. and Chen, Q. (2021b), "Hydration reactivity difference between dicalcium silicate and tricalcium silicate revealed from structural and Bader charge analysis", Int. J. Miner. Metal. Mater.. https://dx.doi.org/10.1007/s12613-021-2364-5.   DOI
13 Qi, C.C. and Fourie, A. (2019), "Cemented paste backfill for mineral tailings management: Review and future perspectives." Miner. Eng. 144, 106025. https://doi.org/10.1016/j.mineng.2019.106025.   DOI
14 Rezamand, A., Afrazi, M. and Shahidikhah, M. (2021), "Study of convex corners' effect on the displacements induced by soil-nailed excavations", J. Adv. Eng. Comput. (JAEC), 5(4).
15 Hu, B., Wu, Y., Wang, H., Tang, Y. and Wang, C. (2021), "Risk mitigation for rockfall hazards in steeply dipping coal seam: a case study in Xinjiang, northwestern China", Geom. Nat. Hazards Risk, 12(1), 988-1014. https://doi.org/10.1080/19475705.2021.1909147.   DOI
16 Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Aliabad, M. D., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B., Shariati, A. and Khorami, M. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.   DOI
17 Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.   DOI
18 Shariati, M., Ramli Sulong, N.H., Arabnejad, M.M.K.H. and Mahoutian, M. (2011), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays, 6(4), 977-983.
19 Huang, G.B., Wang, D.H. and Lan, Y. (2011), "Extreme learning machines: a survey", Int. J. Mach. Learn. Cybern., 2(2), 107-122. https://doi.org/10.1007/s13042-011-0019-y.   DOI
20 Xu, C., Zhang, X., Haido, J.H., Mehrabi, P., Shariati, A., Mohamad, E.T. and Wakil, K. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech. 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503.   DOI
21 Xu, D., Liu, Q., Qin, Y. and Chen, B. (2020). "Analytical approach for crack identification of glass fiber reinforced polymer-sea sand concrete composite structures based on strain dissipations", Struct. Health Monit., 1475921720974290. https://doi.org/10.1177%2F1475921720974290.   DOI
22 Li, G., Sun, Y. and Qi, C. (2021), "Machine learning-based constitutive models for cement-grouted coal specimens under shearing", Int. J. Min. Sci. Tech., 31(5), 813-823. https://doi.org/10.1016/j.ijmst.2021.08.005.   DOI
23 Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020t), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Construct. Build. Mater., 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886.   DOI
24 Kordestani, H., Zhang, C., Masri, S.F. and Shadabfar, M. (2021), "An empirical time-domain trend line-based bridge signal decomposing algorithm using Savitzky-Golay filter", Struct. Health Monit., 28(7), e2750. https://doi.org/10.1002/stc.2750.   DOI
25 Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.   DOI
26 Liu, C., Zandi, Y., Rahimi, A., Peng, Y., Ge, G., Khadimallah, M. A. and Yu, S.T. (2021), "Application of multi-hybrid metaheuristic algorithm on prediction of split-tensile strength of shear connectors", Smart Struct. Syst., 28(2), 167-180. https://doi.org/10.12989/sss.2021.28.2.167.   DOI
27 Majedi, M.R., Afrazi, M. and Fakhimi, A. (2020), "FEM-BPM simulation of SHPB testing for measurement of rock tensile strength", In 54th US Rock Mechanics/Geomechanics Symposium. OnePetro.
28 Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.   DOI
29 Alzo'ubi, A.K. and Ibrahim, F. (2018), "Predicting loading-unloading pile static load test curves by using artificial neural networks", Geotech. Geol. Eng., 31(4), 1-20. https://doi.org/10.1007/s10706-018-0687-4   DOI
30 Alzo'ubi, A.K. and Farid, I. (2017), "Towards building a neural network model for predicting pile static load test curves", 2nd Int. Congress Mater. Struct. Stab. CMSS-2017, Rabat, Morroco, MATEC Web Confer., 22-25. https://doi.org/10.1051/matecconf/201814902031.   DOI
31 Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proce. 4th Int. Conf. Steel Compos. Struct., 21-23.
32 Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020b), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A., 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.   DOI
33 Rouhanifar, S. and Afrazi, M. (2019), "Experimental study on mechanical behavior of sand-rubber mixtures", Modares Civil Eng. J., 19(3), 83-96.
34 Sadeghian, F., Jahandari, S., Haddad, A., Rasekh, H. and Li, J. (2021), "Effects of variations of voltage and pH value on the shear strength of soil and durability of different electrodes and piles during electrokinetic phenomenon", Rock Mech. Geotech. Eng. https://www.sciencedirect.com/science/article/pii/S1674775521001438.
35 Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng. 19(6), 523-532. https://doi.org/10.12989/gae.2019.19.6.523.   DOI
36 Abadi, A.A.R. and Zandi, Y. (2016), "Examining the effect of shape, size and distance of pops in the non-linear behavior of steel shear walls", Turkish Online J. Des. Art Commun., 6, 1761-1765. http://dx.doi.org/10.7456/1060AGSE/058.   DOI
37 Abbasi Parvin, Y., Moradi Shaghaghi, T., Pourbaba, M., Mirrezaei, S. and Zandi, Y. (2021), A Study on the Flexural-Shear Behavior of Concrete Beams and Comparison of the Experimental Test Results with the Prediction of Different Codes.
38 Abdolrahim, J. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072 https://doi.org/10.5897/IJPS11.1324.   DOI
39 Afrazi, M. and Yazdani, M. (2021), "Determination of the effect of soil particle size distribution on the shear behavior of sand", J. Adv. Eng. Comput., 5(2), 125-134. http://dx.doi.org/10.25073/jaec.202152.331.   DOI
40 Yang, Y., Hou, C., Lang, Y., Sakamoto, T., He, Y. and Xiang, W. (2019), "Omnidirectional motion classification with monostatic radar system using micro-Doppler signatures", IEEE Transact. Geosci. Remote Sensing, 58(5), 3574-3587. https://doi.org/10.1109/TGRS.2019.2958178.   DOI
41 Yavari, S., Asadpour, R., Kamyab, H., Yavari, S., Kutty, S.R.M., Baloo, L. and Sidik, A.B.C. (2021a), "Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil", Clean Technol. Environ. Policy, 1-10. http://doi.org/10.1007/s10098-021-02113-z.   DOI
42 Ye, R., Liu, P., Shi, K. and Yan, B. (2020), "State damping control: A movel simple method of rotor UAV with high performance", IEEE Access 8, 214346-214357. https://doi.org/10.1109/ACCESS.2020.3040779.   DOI
43 Yeau, K.Y. and H. Sezen (2012). "Load-rating procedures and performance evaluation of metal culverts", J. Bridge Eng., 17(1), 71-80. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000213.   DOI
44 Yu, Q., Miche, Y., Eirola, E., Van Heeswijk, M., Severin, E. and Lendasse, A. (2013), "Regularized extreme learning machine for regression with missing data", Neurocomputing, 102, 45-51. https://doi.org/10.1016/j.neucom.2012.02.040.   DOI
45 Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Chahnasir, E.S., Porbar, A. and Khorami, M (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.   DOI
46 Shariati, A., Hosseini, S.H.S., Ebrahimi, F. and Toghroli, A. (2021c), "Nonlinear dynamics and vibration of reinforced piezoelectric scale-dependent plates as a class of nonlinear Mathieu-Hill systems: parametric excitation analysis", Eng. Comput., 37(3), 2285-2301. https://doi.org/10.1007/s00366-020-00942-y.   DOI
47 Marino, G., Osouli, A., Elgendy, M. and Karimpour, M. (2017), "Utilization of historical subsidence data for prediction of adverse subsidence conditions over Trona Mine", Int. J. Geomech., 17(2), 04016061. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000734.   DOI
48 Mashkabadi, K. and Zandi, Y. (2021), "The effect of changes in sealing wall and horizontal drainage of Golfaraj dam on the values of lifting pressure parameters and maximum outlet gradient", Int. J. Nonlinear Anal. Appl., 12(1), 419-432.
49 Nilashi, M., Rupani, P.F., Rupani, M.M., Kamyab, H., Shao, W., Ahmadi, H. and Aljojo, N. (2019), "Measuring sustainability through ecological sustainability and human sustainability: a machine learning approach", J. Clean. Prod., 240, 118162. https://doi.org/10.1016/j.jclepro.2019.118162.   DOI
50 Shariati, A., Ghabussi, A., Habibi, M., Safarpour, H., Safarpour, M., Tounsi, A. and Safa, M. (2020g), "Extremely large oscillation and nonlinear frequency of a multi-scale hybrid disk resting on nonlinear elastic foundation." Thin Wall. Struct., 154, 106840. https://doi.org/10.1016/j.tws.2020.106840.   DOI
51 Shariati, A., Shariati, M., Sulong, N.H.R., Suhatril, M., Khanouki, M.M.A. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52(0), 276-283. https://doi.org/10.1016/j.conbuildmat.2013.11.036.   DOI
52 Zandi, Y., O zturk, N., O zturk, H.T. and Durmus, A. (2012), "Study of utilization in cement of activated drinking water treatment sludge at various temperatures", Advan. Environ. Biology, 6(11), 2958-2965.
53 Fanaie, N., Kazerani, S. and Soroushnia, S. (2017a), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Numer. Meth. Eng., 1(3), 16-23.
54 Boscardin, M.D. and Cording, E.J. (1989), "Building response to excavation-induced settlement", J. Geotech. Eng., 115(1), 1-21. https://doi.org/10.1061/(ASCE)0733-9410(1989)115:1(1).   DOI
55 Cao, Y., Pourrostam, T., Zandi, Y., Denic, N., Cirkovic, B., Agdas, A.S. and Milic, M. (2021), "Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors", Environ. Develop. Sustain., 1-25. https://doi.org/10.1007/s10668-021-01382-4.   DOI
56 Elham, K. and Hesam, K. (2016), "Investigating the relationship between soil properties and infestation population of causal agent of soybean charcoal rot (Macrophomina phaseolina)", Acad. J. Agric. Res. 4(6), 363-373. http://dx.doi.org/10.15413/ajar.2016.0106.   DOI
57 Feng, G., Qian, Z. and Zhang, X. (2012), "Evolutionary selection extreme learning machine optimization for regression", Soft Comput., 16(9), 1485-1491. https://doi.org/10.1007/s00500-012-0823-7.   DOI
58 Bathurst, R.J. and Ezzein, F.M. (2015), "Geogrid and soil displacement observations during pullout using a transparent granular soil", Geotech. Testing J., 38(5), 673-685.   DOI
59 Aghakhani, M., Suhatril, M., Mohammadhassani, M., Daie, M. and Toghroli, A. (2015), "A simple modification of homotopy perturbation method for the solution of Blasius equation in semi-infinite domains", Mathem. Prob. Eng., 2015. https://doi.org/10.1155/2015/671527.   DOI
60 Afrazi, M., Yazdani, M., Fakhimi, A. and Alitalesh, M. (2018), "Numerical analysis of effective parameters in direct shear test by hybrid discrete-finite element method", Modares Civil Eng. J., 18(3), 13-24.
61 Ahangari, K., Moeinossadat, S.R. and Behnia, D. (2015), "Estimation of tunnelling-induced settlement by modern intelligent methods", Soils Found., 55(4), 737-748. https://doi.org/10.1016/j.sandf.2015.06.006.   DOI
62 Comartin, C.D., Niewiarowski, R.W., Freeman, S.A. and Turner, F.M. (2000), "Seismic evaluation and retrofit of concrete buildings: a practical overview of the ATC 40 Document", Earthq. Spectra., 16(1), 241-261. https://doi.org/10.1193%2F1.1586093.   DOI
63 Cui, X., Miao, X., Yang, S., Liu, H., Song, Y., Liu, H. and Hu, X. (2000), "Improved prediction of differential subsidence caused by underground mining.", Int. J. Rock Mech. Min., 37(4), 615-627. https://doi.org/10.1016/S1365-1609(99)00125-2.   DOI
64 Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel. Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.   DOI
65 Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel. Compos. Struct., 40(6), 853-868 https://doi.org/10.12989/scs.2021.40.6.853.   DOI
66 Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct. 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.   DOI
67 Chen, F., Jin, Z., Wang, E., Wang, L., Jiang, Y., Guo, P. and He, X. (2021), "Relationship model between surface strain of concrete and expansion force of reinforcement rust", Scientific Reports, 11(1), 1-11. https://doi.org/10.1038/s41598-021-83376-w.   DOI
68 Shariati, M., Sulong, N.R., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Construct. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.   DOI
69 Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.   DOI
70 Iskander, M., Sadek, S. and Liu, J. (2003), "Soil structure interaction in transparent synthetic soils using digital image correlation", TRB Session Recent Adv. Modeling Techniques Geomech. (Committee A2K05).
71 Shariati, M., Sulong, N.R., Suhatril, M., Shariati, A., Khanouki, M.A. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Construct. Build. Mater., 38, 582-593 https://doi.org/10.1016/j.conbuildmat.2012.07.050.   DOI
72 Shariati, M. (2008), Assessment Building Using None-destructive Test Techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer), Universiti Putra Malaysia.
73 Shahabi, S.E.M., Sulong, N.H.R., Shariati, M. and Shah, S.N.R. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185.   DOI
74 Shariati, M., Sulong, N.R., Suhatril, M., Shariati, A., Khanouki, M.A. and Sinaei, H. (2012), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.   DOI
75 Cao, Y., Zandi, Y., Rahimi, A., Wu, Y., Fu, L., Wang, Q. and Paunovic, M. (2021), "A new intelligence fuzzy-based hybrid metaheuristic algorithm for analyzing the application of tea waste in concrete as natural fiber", Comput. Electron. Agric., 190, 106420. https://doi.org/10.1016/j.compag.2021.106420.   DOI
76 Bell, F.G., Cripps, J.C., Culshaw, M.G. and Lovell, M.A. (1988), "A review of ground movements due to civil and mining engineering operations", Geolo. Soc., 5(1), 3-31. https://doi.org/10.1144/GSL.ENG.1988.005.01.01.   DOI
77 Dejun, Y., Zhengfu, B. and Shaogang, L. (2016), "Impact on soil physical qualities by the subsidence of coal mining: a case study in Western China", Environ. Earth Sci., 75(8), 652. https://doi.org/10.1007/s12665-016-5439-2.   DOI
78 Ding, S., Jia, W., Su, C., Zhang, L. and Liu, L. (2011a), "Research of neural network algorithm based on factor analysis and cluster analysis", Neural Comput. Appl., 20(2), 297-302. https://doi.org/10.1007/s00521-010-0416-2.   DOI
79 El-Arab, I.M.E. (2017), "Web shear strengthening technique of deep precast prestressed hollow core slabs under truck loads", J. Build. Construct. Plan. Res., 5(4), 129-145. https://doi.org/10.4236/jbcpr.2017.54010.   DOI
80 El Kahi, E., Deck, O., Khouri, M., Mehdizadeh, R. and Rahme, P. (2020), "Simplified probabilistic evaluation of the variability of soil-structure interaction parameters on the elastic transmission of ground movements", Eng. Struct., 213, 110554. https://doi.org/10.1016/j.engstruct.2020.110554.   DOI
81 Chaallal, O. and Ghlamallah, N. (1996), "Seismic response of flexibly supported coupled shear walls", J. Struct. Eng., 122(10), 1187-1197. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:10(1187).   DOI
82 Chahnasir, E.S., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamad, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413.   DOI
83 Shariati, A., Barati, M.R., Ebrahimi, F. and Toghroli, A. (2020b), "Investigation of microstructure and surface effects on vibrational characteristics of nanobeams based on nonlocal couple stress theory", Adv. Nano Res., 8(3), 191-202 https://doi.org/10.12989/anr.2020.8.3.191.   DOI
84 Speck, R.C. and Bruhn, R.W. (1995), "Non-uniform mine subsidence ground movement and resulting surface-structure damage", Environ. Eng. Geosci. 1(1), 61-74. https://doi.org/10.2113/gseegeosci.I.1.61.   DOI
85 Toghroli, A. (2015), Applications of the ANFIS and LR models in the Prediction of Shear Connection in Composite Beams, Master Thesis, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
86 Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347.   DOI
87 Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. https://doi.org/10.12989/scs.2018.27.5.537.   DOI
88 Shahgoli, A.F., Zandi, Y., Heirati, A., Khorami, M., Mehrabi, P. and Petkovic, D. (2020), "Optimisation of propylene conversion response by neuro-fuzzy approach", Int. J. Hydromechatronics, 3(3), 228-237. http://dx.doi.org/10.1504/IJHM.2020.10030656.   DOI
89 Shariati, A., Ebrahimi, F., Hosseini, S.H.S., Toghroli, A. and Bayrami, S.S. (2020d), "On the nonlinear dynamics of viscoelastic graphene sheets conveying nanoflow: Parametric excitation analysis", Mech. Based Des. Struct. Mach., 1-18. https://doi.org/10.1080/15397734.2020.1728544.   DOI
90 Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct. 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237.   DOI
91 Siddharthan, R., Ara, S. and Norris, G.M. (1992), "Simple rigid plastic model for seismic tilting of rigid walls", J. Struct. Eng., 118(2), 469-487. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:2(469).   DOI
92 Chen, Y. and Zheng, W.X. (2012), "Stochastic state estimation for neural networks with distributed delays and Markovian jump", Neural Networks, 25, 14-20. https://doi.org/10.1016/j.neunet.2011.08.002.   DOI
93 Chatellier, L., Jarny, S., Gibouin, F. and David, L. (2013), "A parametric PIV/DIC method for the measurement of free surface flows", Experim. Fluids, 54(3), 1-15. https://doi.org/10.1007/s00348-013-1488-4.   DOI
94 Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", https://doi.org/10.12989/scs.2019.30.5.457.   DOI
95 Chen, F.X., Zhong, Y.C., Gao, X.Y., Jin, Z.Q., Wang, E.D., Zhu, F.P. and He, X.Y. (2021), "Non-uniform model of relationship between surface strain and rust expansion force of reinforced concrete", Scientific Reports, 11(1), 1-9. https://doi.org/10.1038/s41598-021-88146-2.   DOI
96 Comartin, C., Keaton, J., Grant, P., Martin, G. and Power, M. (1996), "Transitions in seismic analysis and design procedures for buildings and their foundations", Proceedings of the 6th workshop on the improvement of structural design and construction practice in the US and Japan, ATC Report no ATC.
97 Milovancevic, M., Zandi, Y., Rahimi, A., Denic, N., Vujovic, V., Zlatkovic, D. and Ivanovic, V. (2022), "Engine performance fueled with jojoba biodiesel and enzymatic saccharification on the yield of glucose of microbial lipids biodiesel", Energy, 239, 122390. https://doi.org/10.1016/j.energy.2021.122390.   DOI
98 Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.M. and Khorami, M. (2018), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, 21(5), 525-530. http://doi.org/10.12989/cac.2018.21.5.525.   DOI
99 Sinaei, H., Shariati, M., Abna, A. H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essays 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.   DOI
100 Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652   DOI
101 Shariati, A., Sulong, N.H.R., Suhatril, M. and Shariati, M. (2012a), "Various types of shear connectors in composite structures: a review", Int. J. Physic. Sci., 7(22), 2876-2890. https://doi.org/10.5897/IJPSx11.004.   DOI
102 Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.   DOI
103 Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth Int. Confer. Advan. Civil, Struct. Mech. Eng.-CSM 2017.
104 Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020p), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155.   DOI
105 Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.   DOI
106 Shariati, A., Qaderi, S., Ebrahimi, F. and Toghroli, A. (2020j), "On buckling characteristics of polymer composite plates reinforced with graphene platelets", Eng. Comput., 1-12. https://doi.org/10.1007/s00366-020-00992-2.   DOI
107 Shariati, M. (2013), Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
108 Fema, P. (2000), Commentary for the Seismic Rehabilitation of Buildings, FEMA-356, Federal Emergency Management Agency, Washington, D.C.
109 Fanaie, N. and Tahriri, M. (2017b), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1016/j.jcsr.2017.06.032.   DOI
110 Fang, Q., Du, J.M., Li, J.Y., Zhang, D.L. and Cao, L.Q. (2021), "Settlement characteristics of large-diameter shield excavation below existing subway in close vicinity", J. Cent. South Univ., 28(3), 882-897. https://doi.org/10.1007/s11771-021-4628-7.   DOI
111 Feng, P., Chang, H., Liu, X., Ye, S., Shu, X. and Ran, Q (2020), "The significance of dispersion of nano-SiO2 on early age hydration of cement pastes", Mater. Design, 186, 108320. https://doi.org/10.1016/j.matdes.2019.108320.   DOI
112 Franza, A., Ritter, S. and Dejong, M.J. (2020), "Continuum solutions for tunnel-building interaction and a modified framework for deformation prediction", Geotechnique 70(2), 108-122. https://doi.org/10.1680/jgeot.17.P.279.   DOI
113 Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.   DOI
114 Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Khanouki, M.A (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.   DOI
115 Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst. 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497.   DOI
116 Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.   DOI
117 Mojtaba, D. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Physic. Sci., 6(36), 8044-8050. https://doi.org/10.5897/ijps11.1585.   DOI
118 Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N.A. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.   DOI
119 Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473. https://doi.org/10.12989/gae.2019.19.6.473.   DOI
120 Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020k), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.   DOI
121 Feng, S., Zuo, C., Zhang, L., Yin, W. and Chen, Q. (2021), "Generalized framework for non-sinusoidal fringe analysis using deep learning", Photonic. Res. 9(6), 1084-1098. https://doi.org/10.1364/PRJ.420944.   DOI
122 Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Physica. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.   DOI
123 Hird, C. and Stanier, S. (2010), "Modelling helical screw piles in clay using a transparent soil", Proceedings of the 7th International Conference on Physical Modelling in Geotechnics.
124 Hosseini, S.A. and Toghroli, A. (2021), "Effect of mixing Nano-silica and Perlite with pervious concrete for nitrate removal from the contaminated water", Adv. Concrete Constru. 11(6), 531-544. https://doi.org/10.12989/acc.2021.11.6.531.   DOI
125 Ezzein, F.M. and Bathurst, R.J. (2014), "A new approach to evaluate soil-geosynthetic interaction using a novel pullout test apparatus and transparent granular soil", Geotext. Geomembranes, 42(3), 246-255. https://doi.org/10.1016/j.geotexmem.2014.04.003.   DOI
126 Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D. K. and Khorami, M (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct. 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439.   DOI
127 Zaidi, S. (2014), "Scope of the application of support vector machines to polymer composite", Advan. Funct. Polymers Compos., 195.
128 Zandi, Y. and Alayi, M. (2019), "Effect of comparison of Ardabil pozzuoli cement and type 2 Sufyan cement compressive strength viewpoints and improvement solutions", J. Struct. Construct. Eng., 6(4), 95-110. https://dx.doi.org/10.22065/jsce.2018.117984.1454.   DOI
129 Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Construct. Build. Mater., 252, 118997. http://doi.org/10.1016/j.conbuildmat.2020.118997.   DOI
130 Alzo'ubi, A.K. (2019), "Effect of strength properties on displacement magnitude and fracturing amount inside a large open pit prone to topple", J. GeoEng., 14(2), 65-76. http://dx.doi.org/10.6310/jog.201906_14(2).2.   DOI
131 Alzo'ubi, A.K. and Ibrahim, F. (2018), "Predicting the pile static load test using backpropagation neural network and generalized regression neural network -a comparative study", Int. J. Geotech. Eng., 1-12. https://doi.org/10.1080/19386362.2018.1519975.   DOI
132 Barlett, P. (1976), Foundation Rocking on a Clay Soil, Master Thesis, University of Auckland.
133 Bitarafan, M. and Vahdani, R. (2020), "Assessing the effect of soil-structure interaction on damage indices of reinforced concrete frames", Europ. J. Environ. Civil Eng., 24(11), 1693-1708. https://doi.org/10.1080/19648189.2018.1482789.   DOI
134 Cai, T., Zandi, Y., Agdas, A.S., Selmi, A., Issakhov, A. and RocoVidela, A. (2021), "The compressive strength of concrete retrofitted with wind ash and steel slag pozzolans with a watercement based polymers", Advan. Concrete Construct., 11(6), 507-519. https://doi.org/10.12989/acc.2021.11.6.507.   DOI
135 Cao, Y., Zandi, A. Agdas, A.S., Wang, Q., Qian, X., Fu, L., Wakil, K., Selmi, A., Issakhov, A. and Roco-Videla, A. (2021c), "A review study of application of artificial intelligence in construction management and composite beams", Steel Compos. Struct., 39(6), 685-700. https://doi.org/10.12989/scs.2021.39.6.685.   DOI
136 Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-019-00780-7   DOI
137 Zandi, Y., M. Husem, S. Pul and M. Mehdizadeh (2011), "Effect of mix design on restrained shrinkage of concrete", http://dl.lib.mrt.ac.lk/handle/123/9526.
138 Jahandari, S., Tao, Z., Saberian, M., Shariati, M., Li, J., Abolhasani, M. and Rashidi, M. (2021), "Geotechnical properties of lime-geogrid improved clayey subgrade under various moisture conditions", Road Mater. Pave. Des., 1-19, https://www.tandfonline.com/doi/abs/10.1080/14680629.2021.1950816.
139 Jermsittiparsert, K., Ghabussi, A., Forooghi, A., Shavalipour, A., Habibi, M., won Jung, D. and Safa, M. (2020), "Critical voltage, thermal buckling and frequency characteristics of a thermally affected GPL reinforced composite microdisk covered with piezoelectric actuator", Mech. Based Des. Struct. Mach., 1-23. https://doi.org/10.1080/15397734.2020.1748052.   DOI
140 Jung, H.C., Kim, S.W., Jung, H.S., Min, K.D. and Won, J.S. (2007), "Satellite observation of coal mining subsidence by persistent scatterer analysis", Eng. Geol., 92(1-2), 1-13.   DOI
141 Kazerani, S., Fanaie, N. and Soroushnia, S. (2017), "Seismic behavior of drilled beam section in moment connections", Int. J. Numer. Meth. Civil Eng., 1(4), 1-6.
142 Khanouki, M.A., Sulong, N.R., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.   DOI
143 Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.   DOI
144 Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020l), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393. https://doi.org/10.12989/scs.2020.34.3.393.   DOI
145 Cao, Y., Zandi, Y., Gholizadeh, M., Fu, L., Du, J., Qian, X. and Issakhov, A. (2021), "Optimization algorithms for composite beam as smart active control of structures using genetic algorithms", Smart Struct. Syst., 27(6), 1041-1052. https://doi.org/10.12989/sss.2021.27.6.1041.   DOI
146 Cao, Y., Zandi, Y., Rahimi, A., Petkovic, D., Denic, N., Stojanovic, J. and Assilzadeh, H. (2021), "Evaluation and monitoring of impact resistance of fiber reinforced concrete by adaptive neuro fuzzy algorithm", Struct., 34, 3750-3756). https://doi.org/10.1016/j.istruc.2021.09.072.   DOI
147 Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct. 17(5), 623-639. http://dx.doi.org/10.12989/scs.2014.17.5.623.   DOI
148 Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Fifth Int. Confer. Advan. Civil, Struct. Mech. Eng. - CSM 2017, Zurich, Switzerland.
149 Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N.A. and Poi-Ngian, S. (2019c), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.   DOI
150 Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020n), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.   DOI
151 White, D. and Bolton, M. (2004), "Displacement and strain paths during plane-strain model pile installation in sand", Geotechnique 54(6), 375-397. https://doi.org/10.1680/geot.2004.54.6.375.   DOI
152 Najarkolaie, K.F., Mohammadi, M. and Fanaie, N. (2017), "Realistic behavior of infilled steel frames in seismic events: experimental and analytical study", B. Earthq. Eng., 15(12), 5365-5392. https://doi.org/10.1007/s10518-017-0173-z.   DOI
153 Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct. 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.   DOI
154 Sadeghian, F., Haddad, A., Jahandari, S., Rasekh, H. and Ozbakkaloglu, T. (2021), "Effects of electrokinetic phenomena on the load-bearing capacity of different steel and concrete piles: A small-scale experimental study", Canadian Geotech. J., 58(5). https://doi.org/10.1139/cgj-2019-065.   DOI
155 Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst. 22(4), 433-440. http://doi.org/10.12989/sss.2018.22.4.433.   DOI
156 Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019a), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst. 24(3), 415-425. http://doi.org/10.12989/sss.2019.24.3.415.   DOI
157 Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech. 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.   DOI
158 Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct. 27(3), 389-399. https://doi.org/10.12989/scs.2018.27.3.389.   DOI
159 Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011c), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proce. 2011 World Congress Advan. Struct. Eng. Mech.
160 Zandi, Y. (2013). "Comparison of dual system of steel moment frame and thin steel plate shear walls with dual system of steel moment frame and cross bracing or chevron with a design method based on performance levels", Bull. Environ. Pharmacol. Life Sci., 2(10), 51-57.
161 Son, M. and Cording, E.J. (2008), "Numerical model tests of building response to excavation-induced ground movements", Canadian Geotech. J., 45(11), 1611-1621. https://doi.org/10.1139/T08-074.   DOI
162 Wei, Z., Zandi, Y., Gholizadeh, M., Selmi, A., Roco-Videla, A. and Konbr, U. (2021), "On the optimization of building energy, material, and economic management using soft computing", Advan. Concrete Construct., 11(6), 455-468. https://doi.org/10.12989/acc.2021.11.6.455.   DOI
163 Franza, A., Marshall, A.M. and Zhou, B. (2019), "Greenfield tunnelling in sands: the effects of soil density and relative depth", Geotechnique 69(4), 297-307. https://doi.org/10.1680/jgeot.17.P.091.   DOI
164 Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in selangor, Malaysia", Geotech. Geolo. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.   DOI
165 Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of C-Shaped and L-Shaped angle shear connectors", PLoS One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989.   DOI
166 Toghroli, A., Nasirianfar, M.S., Shariati, A., Khorami, M., Paknahad, M., Ahmadi, M. and Zandi, Y. (2020b), "Analysis of extended end plate connection equipped with SMA bolts using component method", Steel Compos. Struct. 36(2), 213-228. http://doi.org/10.12989/scs.2020.36.2.213.   DOI
167 Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manufact., 29(8), 1793-1801. http://doi.org/10.1007/s10845-016-1217-y.   DOI
168 Xu, J., Wu, Z., Chen, H., Shao, L., Zhou, X. and Wang, S. (2021), "Triaxial shear behavior of basalt fiber-reinforced loess based on digital image technology", Ksce J. Civil Eng., 25(10), 3714-3726. https://doi.org/10.1007/s12205-021-2034-1.   DOI
169 Majedi, M.R., Afrazi, M. and Fakhimi, A., (2021), "A micromechanical model for simulation of rock failure under high strain rate loading", Int. J. Civil Eng., 19(5), 501-515. https://doi.org/10.1007/s40999-020-00551-2.   DOI
170 Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. https://doi.org/10.12989/scs.2019.30.3.271.   DOI
171 Marshall, A.M., Farrell, R.P., Klar, A. and Mair, R. (2012), "Tunnels in sands: the effect of size, depth and volume loss on greenfield displacements", Geotechnique, 62(5), 385-399. https://doi.org/10.1680/geot.10.P.047.   DOI
172 Martin, G. and Yan, L. (1999), "Simulation of Moment Rotation Behavior of a Model Footing", FLAC and Numerical Modeling in Geomechanics, http://dx.doi.org/10.1201/9781003078531-53.   DOI
173 Safa, M., Ahmadi, M., Mehrmashadi, J., Petkovic, D., Mohammadhassani, M., Zandi, Y. and Sedghi, Y. (2020a), "Selection of the most influential parameters on vectorial crystal growth of highly oriented vertically aligned carbon nanotubes by adaptive neuro-fuzzy technique", Int. J. Hydromechatronics, 3(3), 238-251. http://dx.doi.org/10.1504/IJHM.2020.10030657.   DOI
174 Qi, C., Manzano, H., Spagnoli, D., Chen, Q. and Fourie, A. (2021a), "Initial hydration process of calcium silicates in Portland cement: a comprehensive comparison from molecular dynamics simulations", Cement Concrete Res., 149, 106576. https://doi.org/10.1016/j.cemconres.2021.106576.   DOI
175 Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.   DOI
176 Rouhanifar, S., Afrazi, M., Fakhimi, A. and Yazdani, M., (2021), "Strength and deformation behaviour of sand-rubber mixture", Int. J. Geotech. Eng., 15(9), 1078-1092. https://doi.org/10.1080/19386362.2020.181219.   DOI
177 Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Azar, V.M., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.   DOI
178 Shahabi, S.E.M., Sulong, N.H.R., Shariati, M., Mohammadhassani, M. and Shah, S.N.R. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. https://doi.org/10.12989/scs.2016.20.3.651.   DOI
179 Shah, S.N.R., Sulong, N.H.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016c), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021.   DOI
180 Shah, S.N.R., Sulong, N.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016b), "Behavior of industrial steel rack connections", Mech. Syst. Signal Pr., 70-71, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.   DOI
181 Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian multiplier method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.   DOI
182 Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A., 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.   DOI
183 Wang, H., Wang, L., Cheng, Y. and Zhou, H. (2013), "Characteristics and dominant controlling factors of gas outburst in Huaibei coalfield and its countermeasures", Int. J. Mining Sci. Technol., 23(4), 591-596. https://doi.org/10.1016/j.ijmst.2013.07.019   DOI
184 Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)." Smart Struct. Syst. 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183.   DOI
185 Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020r), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.   DOI
186 Mehdizadeh, B., Jahandari, S., Vessalas, K., Miraki, H., Rasekh, H. and Samali, B. (2021), "Fresh, mechanical, and durability properties of self-compacting mortar incorporating alumina nanoparticles and rice husk ash", Materials, 14(22). https://www.mdpi.com/1996-1944/14/22/6778.
187 Meshkabadi, K. and Zandi, Y. (2019), "The effects of grout curtain parameters on uplift and piping phenomenon; case study: Sattarkhan dam", Hydrolog., 6(3), 71. https://doi.org/10.3390/hydrology6030071.   DOI
188 El-Arab, I.M.E. (2012), "Analytical methodology of seismic fragility curve for reinforcement concrete pier bridges in Egypt", Int. J. Eng. Adv. Technol.   DOI
189 Karimi, H., Rahmani, R., Othman, M.F., Zohoori, B., Mahrami, M., Kamyab, H. and Hosseini, S.E. (2016), "An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks", Plasmonics, 11(1), 95-102. https://doi.org/10.1007/s11468-015-9998-y.   DOI
190 Maslahati Roudi, A., Chelliapan, S., Wan Mohtar, W.H.M. and Kamyab, H. (2018), "Prediction and optimization of the fenton process for the treatment of landfill leachate using an artificial neural network", Water, 10(5), 595, https://doi.org/10.3390/w10050595.   DOI
191 Nouri, K., Sulong, N.H.R., Ibrahim, Z. and Shariati, M. (2021), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38. https://doi.org/10.18057/Ijasc.2021.17.1.4.   DOI
192 Yavari, S., Kamyab, H., Asadpour, R., Yavari, S., Sapari, N.B., Baloo, L. and Chelliapan, S. (2021b), "The fate of imazapyr herbicide in the soil amended with carbon sorbents", Biomass Convers. Biorefinery, 1-9. http://doi.org/10.1007/s13399-021-01587-7.   DOI
193 Ma, R., Karimzadeh, M., Ghabussi, A., Zandi, Y., Baharom, S., Selmi, A. and Maureira-Carsalade, N. (2021), "Assessment of composite beam performance using GWO-ELM metaheuristic algorithm", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01363-1.   DOI
194 Shariati, M., Ramli Sulong, N., Suhatril, M., Shariati, A., Arabnejad Khanouki, M. and Sinaei, H. (2012), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth Int. Confer. Eng. Fail. Anal., Hague, July.
195 Zhao, C., Liu, X., Zhong, S., Shi, K., Liao, D. and Zhong, Q. (2021), "Secure consensus of multi-agent systems with redundant signal and communication interference via distributed dynamic event-triggered control", ISA Trans, 112, 89-98. https://doi.org/10.1016/j.isatra.2020.11.030.   DOI
196 Shariati, A., Ebrahimi, F., Karimiasl, M., Selvamani, R. and Toghroli, A. (2020e), "On bending characteristics of smart magneto-electro-piezoelectric nanobeams system", Adv. Nano Res. 9(3), 183-191. https://doi.org/10.12989/anr.2020.9.3.183.   DOI
197 Shariati, A. (2014), Behaviour of C-shaped Angle Shear Connectors in High Strength Concrete, M.SC, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
198 Shariati, A., Barati, M.R., Ebrahimi, F., Singhal, A. and Toghroli, A. (2020a), "Investigating vibrational behavior of graphene sheets under linearly varying in-plane bending load based on the nonlocal strain gradient theory", Adv. Nano Res., 8(4), 265-276. https://doi.org/10.12989/anr.2020.8.4.265.   DOI
199 Shariati, A., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2020c), "Wave propagation analysis of electro-rheological fluid-filled sandwich composite beam", Mech. Based Des. Struct. Mach., 1-10. https://doi.org/10.1080/15397734.2020.1745646.   DOI
200 Shariati, A., Ebrahimi, F., Karimiasl, M., Vinyas, M. and Toghroli, A. (2020f), "On transient hygrothermal vibration of embedded viscoelastic flexoelectric/piezoelectric nanobeams under magnetic loading", Adv. Nano Res., 8(1), 49-58. https://doi.org/10.12989/anr.2020.8.1.049.   DOI
201 Shariati, A., Habibi, M., Tounsi, A., Safarpour, H. and Safa, M. (2021a), "Application of exact continuum size-dependent theory for stability and frequency analysis of a curved cantilevered microtubule by considering viscoelastic properties", Eng. Comput. 37(4), 3629-3648. https://doi.org/10.1007/s00366-020-01024-9.   DOI
202 Khudhair, A.B., Hadibarata, T., Yusoff, A.R.M., Teh, Z.C., Adnan, L.A. and Kamyab, H. (2015), "Pyrene metabolism by new species isolated from soil Rhizoctonia zeae SOL3", Water Air Soil Poll., 226(6), 1-9, https://doi.org/10.1007/s11270-015-2432-4.   DOI
203 Burland, J.B., Mair, R.J. and Standing, J.R. (2004), "Ground performance and building response due to tunnellin", In Advances in geotechnical engineering: The Skempton conference: Proceedings of a three day conference on advances in geotechnical engineering, organised by the Institution of Civil Engineers and held at the Royal Geographical Society, London, U.K. March.
204 Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Advan. Mater. Res., 168, 2329-2333. www.scientific.net/AMR.168-170.2329.   DOI
205 Alzo'ubi, A.K. (2014), "Stability of a Rock Slope Susceptible to Seasonal Movements", Int. J. Geomate, 6, 800-805.
206 Cao, Y., Zandi, Y., Rahimi, A., Fan, Q., Bai, Y., Guo, J. and Assilzadeh, H. (2021), "Analysis of leaking ratio of sealing device for the intake port of EMC closed integral structure turbine disk through soft computing", Advan. Nano Res., 11(3), 313. https://doi.org/10.12989/anr.2021.11.3.313.   DOI
207 Ding, S., Su, C. and Yu, J. (2011b), "An optimizing BP neural network algorithm based on genetic algorithm", Artif. Intell. Rev., 36(2), 153-162. https://doi.org/10.1007/s10462-011-9208-z.   DOI
208 Kumar, A., Sharma, T., Mulla, S.I., Kamyab, H., Pant, D. and Sharma, S. (2019), "Let's protect our earth: environmental challenges and implications", Microb. Enzymes Soil Health Bioremediat., 16, 1-10. https://doi.org/10.1007/978-981-13-9117-0_1.   DOI
209 Li, L. N., Ouyang, J.H., Chen, H.L. and Liu, D.Y. (2012), "A computer aided diagnosis system for thyroid disease using extreme learning machine", J. Med. Syst., 36(5), 3327-3337. https://doi.org/10.1007/s10916-012-9825-3.   DOI
210 Jahandari, S., Mohammadi, M., Rahmani, A., Abolhasani, M., Miraki, H., Mohammadifar, L., Kazemi, M., Saberian, M. and Rashidi, M. (2021), "Mechanical properties of recycled aggregate concretes containing silica fume and steel fibres", Material, 14(22). https://www.mdpi.com/1996-1944/14/22/7065.
211 Zhang, K., Jia, C., Song, Y., Jiang, S., Jiang, Z., Wen, M. and Liu, T. (2020), "Analysis of lower cambrian shale gas composition, source and accumulation pattern in different tectonic backgrounds: A case study of weiyuan block in the upper Yangtze region and Xiuwu Basin in the Lower Yangtze region", Fuel, 263, 115978. https://doi.org/10.1016/j.fuel.2019.115978.   DOI
212 Xie, W., Zhang, R., Zeng, D., Shi, K. and Zhong, S. (2020), "Strictly dissipative stabilization of multiple-memory Markov jump systems with general transition rates: A novel event- triggered control strategy", Int. J. Robust Nonlinear Control, 30(5), 1956-1978. https://doi.org/10.1002/rnc.4856.   DOI
213 Zheng, W., Qian, Y. and Lu, H. (2013), "Text categorization based on regularization extreme learning machine", Neural Comput. Appl., 22(3), 447-456. https://doi.org/10.1007/s00521-011-0808-y.   DOI
214 Zhou, W., Lv, Y., Lei, J. and Yu, L. (2019), "Global and local-contrast guides content-aware fusion for RGB-D saliency prediction", IEEE Transact. Syst., Man and Cybernetics: Syst., https://doi.org/10.1109/TSMC.2019.2957386.   DOI
215 Filiatrault, A., Anderson, D. and DeVall, R. (1992), "Effect of weak foundation on the seismic response of core wall type buildings", Can. J. Civil Eng., 19(3), 530-539.   DOI
216 Shariati, A., Jung, D.W., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020i), "Stability and dynamics of viscoelastic moving Rayleigh beams with an asymmetrical distribution of material parameters", Symmetry-Basel, 12(4), 586. https://doi.org/10.3390/sym12040586.   DOI
217 Wang, H., Zandi, Y., Gholizadeh, M. and Issakhov, A. (2021), "Buckling of porosity-dependent bi-directional FG nanotube using numerical method", Advan. Nano Res., 10(5), 493-507 https://doi.org/10.12989/anr.2021.10.5.493.   DOI
218 Xu, X. Z., Ding, S.F., Shi, Z.Z. and Zhu, H. (2012), "Optimizing radial basis function neural network based on rough sets and affinity propagation clustering algorithm", J. Zhejiang Univ. SCci. C, 13(2), 131-138. https://doi.org/10.1631/jzus.C1100176.   DOI
219 Ge, Y., Ashrafi, N., Oslub, K., Zandi, Y., Gholizadeh. M. and Issakhov, A. (2021), "Maximum amplitude, quasi-static indentation, and frequency information of the angle-ply laminated curved panel subjected to low-velocity impact", Mech. Based Des. Struc., 1-16. https://doi.org/10.1080/15397734.2021.1920032.   DOI
220 Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737.   DOI
221 Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499, https://doi.org/10.12989/scs.2018.26.4.485.   DOI
222 Shahgoli, A. F., Zandi, Y., Rava, A., Baharom, S., Paknahad, M., Ahmadi, M. and Wakil, K. (2021), "Estimation of the most influential parameters affecting the rotary braces damper", Iran. J. Sci. Technol. Trans. Civil Eng., 45, 2463-2475. https://doi.org/10.1007/s40996-020-00551-1.   DOI
223 Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A. and Poi-Ngian, S. (2019e), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct. 33(3), 319-332 https://doi.org/10.12989/scs.2019.33.3.319.   DOI
224 Shariati, M., Rafie, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Mehrabi, P. and Poi-Ngian, S. (2019), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Advan. Concrete Construct., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225.   DOI
225 Shariati, M., Ramli-Sulong, N.H., Arabnejad, M.M., Shafigh, P. and Sinaei, H. (2011a), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Sci. Res. Essays, 6(1), 213-220. https://doi.org/10.5897/SRE10.879.   DOI
226 Cao, Y., Selmi, A., Tohfenamarvar, R., Zandi, Y., Kasehchi, E. and Assilzahed, H. (2021), "In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets", Advan. Nano Res., 10(2), 101-114. https://doi.org/10.12989/anr.2021.10.2.101.   DOI
227 Luo, J., Li, M., Liu, X., Tian, W., Zhong, S. and Shi, K. (2020), "Stabilization analysis for fuzzy systems with a switched sampled-data control", J. Franklin I., 357(1), 39-58. https://doi.org/10.1016/j.jfranklin.2019.09.029.   DOI
228 Shariati, A., Hosseini, S.H.S., Bayrami, S.S., Ebrahimi, F. and Toghroli, A. (2021b), "Effect of residual surface stress on parametrically excited nonlinear dynamics and instability of viscoelastic piezoelectric nanoelectromechanical resonators", Eng. Comput., 37(3), 1835-1850. https://doi.org/10.1007/s00366-019-00916-9.   DOI
229 Shah, S.N.R., Sulong, N.H.R., Jumaat, M.Z. (2015), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", Plos One, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.   DOI
230 Sari, P.A., Suhatril, M., Osman, N., Mu'azu, M.A., Dehghani, H., Sedghi, Y., Safa, M., Hasanipanah, M., Wakil, K. and Khorami, M. (2019), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput. 35(4), 1521-1531. https://doi.org/10.1007/s00366-018-0677-4.   DOI
231 Shah, S.N.R., Sulong, N.H.R., Jumaat, M.Z. and Shariati, M. (2016a), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.   DOI
232 Ming, Y., Zandi, Y., Gholizadeh, M., Oslub, K., Khadimallah, M. A. and Issakhov, A. (2021), "Computer simulation for stability performance of sandwich annular system via adaptive tuned deep learning neural network optimization", Adv. Nano Res., 11(1), 83-99. https://doi.org/10.12989/anr.2021.11.1.083.   DOI
233 Zhao, C., Zhong, S., Zhang, X., Zhong, Q. and Shi, K. (2020a), "Novel results on nonfragile sampled-data exponential synchronization for delayed complex dynamical networks", Int. J. Robust Nonlinear Control, 30(10), 4022-4042. https://doi.org/10.1002/rnc.4975.   DOI
234 Jahanbakhti, E., Fanaie, N. and Rezaeian, A. (2017), "Experimental investigation of panel zone in rigid beam to box column connection", J. Constr. Steel Res., 137, 180-191. https://doi.org/10.1016/j.jcsr.2017.06.025.   DOI
235 Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S. B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.   DOI
236 Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS One, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.   DOI
237 Shariati, A., Jung, D. W., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020h), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Mater., 13(7), 1707. https://doi.org/10.3390/ma13071707.   DOI
238 Iskander, M. and Liu, J. (2010), "Spatial deformation measurement using transparent soil", Geotech. Test. J., 33(4), 314-321. http://dx.doi.org/10.1520/GTJ102745.   DOI
239 Jahandari, S., Tao, Z., Saberian, M., Shariati, M., Li, J., Abolhasani, M. and Rashidi, M. (2021), "Geotechnical properties of lime-geogrid improved clayey subgrade under various moisture conditions", Road Mater. Pavement Des., 1-19. https://doi.org/10.1080/14680629.2021.1950816.   DOI
240 Kim, C.Y., Bae, G.J., Hong, S.W., Park, C.H., Moon, H.K. and Shin, H.S. (2001), "Neural network based prediction of ground surface settlements due to tunnelling", Comput. Geotech., 28(6-7), 517-547. https://doi.org/10.1016/S0266-352X(01)00011-8.   DOI
241 Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z.Y. and Shariati, A. (2021d), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524 https://doi.org/10.1016/j.compstruct.2021.114524.   DOI
242 Shariati, M., Sulong, N.R., Shariati, A. and Khanouki, M.A. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.   DOI
243 Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proc. 4th Int. Conf. Steel Compos. Struct., Sydney, July.
244 Shariati, M., Shariati, A., Sulong, N.R., Suhatril, M. and Khanouki, M.A. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134 https://doi.org/10.1016/j.engfailanal.2014.02.017.   DOI
245 Shariati, M., Sulong, N.R. and Khanouki, M.A. (2012c), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331 https://doi.org/10.1016/j.matdes.2011.08.008.   DOI
246 Yanzhen, Q., Zandi, Y., Rahimi, A., Pourkhorshidi, S., RocoVidela, A., Khadimallah, M.A. and Assilzadeh, H. (2021), "Nano-SiO 2 for efficiency of geotechnical properties of fine soils in mining and civil engineering", Advan. Nano Res. 11(3), 301-312. https://doi.org/10.12989/anr.2021.11.3.301.   DOI
247 Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Cleaner Product., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.   DOI
248 Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M., & Shariati, M. (2013a), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.   DOI
249 Miraki, H., Shariatmadari, N., Ghadir, P., Jahandari, S., Tao, Z. and Siddique, R. (2021), "Clayey soil stabilization using alkali-activated volcanic ash and slag", Rock Mech. Geotech. Eng., https://www.sciencedirect.com/science/article/pii/S1674775521001530.
250 Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst. 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.   DOI
251 Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2013b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833.   DOI
252 Mohammadreza, H. (2012), "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring", Sci. Res. Essays, 7(21), 1997-2001. https://doi.org/10.5897/sre11.1387.   DOI
253 Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. https://doi.org/10.12989/eas.2017.13.6.531.   DOI
254 Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct. 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433.   DOI
255 Taheri, E., Esgandarzadeh Fard, S., Zandi, Y. and Samali, B. (2021), "Experimental and numerical investigation of an innovative method for strengthening cold-formed steel profiles in bending throughout finite element modeling and application of neural network based on feature selection method", Appl. Sci., 11(11), 5242. https://doi.org/10.3390/app11115242.   DOI
256 Ghobarah, A. (2001), "Performance-based design in earthquake engineering: state of development", Eng. Struct., 23(8), 878-884. https://doi.org/10.1016/S0141-0296(01)00036-0.   DOI
257 Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020s), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct. 34(3), 377-391 https://doi.org/10.12989/scs.2020.34.3.377.   DOI
258 Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020m). "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.   DOI
259 Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020o), "A novel hybrid extreme learning machine-grey wolf optimizer (ELMGWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.   DOI
260 Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N. and Poi-Ngian, S. (2019d), "Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete", Appl. Sci.-Basel, 9(24), 5534. https://doi.org/10.3390/app9245534.   DOI
261 Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct. 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067.   DOI
262 Yin, J., Tong, H., Gholizadeh, M., Zandi, Y., Selmi, A., RocoVidela, A. and Issakhov, A. (2021), "Economic construction management of composite beam using the head stud shear connector with encased cold-formed steel built-up fix beam via efficient computer simulation", Adv. Concrete Construct., 11(5), 429-445. https://doi.org/10.12989/acc.2021.11.5.429.   DOI
263 Zhang, M., Xu, P., Li, J. and Wang, R. (2019), "Mining-induced ground movements and displacements using transparent soil model test", Geotech. Res., 6(4), 252-264. https://doi.org/10.1680/jgere.18.00031.   DOI
264 Zhao, C., Zhong, S., Zhong, Q. and Shi, K. (2020b), "Synchronization of Markovian complex networks with input mode delay and Markovian directed communication via distributed dynamic event-triggered control", Nonlinear Anal. Hybrid Syst., 36, 100883. https://doi.org/10.1016/j.nahs.2020.100883.   DOI