Retrofitted built-up steel angle members for enhancing bearing capacity of latticed towers: Experiment |
Wang, Jian-Tao
(Department of Civil Engineering, Xi'an Jiaotong University)
Wu, Xiao-Hong (School of Aerospace, Xi'an Jiaotong University) Yang, Bin (Department of Civil Engineering, Xi'an Jiaotong University) Sun, Qing (Department of Civil Engineering, Xi'an Jiaotong University) |
1 | Moon, B.W., Park, J.H., Lee, S.K., Kim, J., Kim, T. and Min, K. W. (2009), "Performance evaluation of a transmission tower by substructure test", J. Constr. Steel. Res., 65(1), 1-11. https://doi.org/10.1016/j.jcsr.2008.04.003. DOI |
2 | Taranath, B.S. (2016), Structural Analysis and Design of Tall Buildings: Steel and Composite Construction, CRC press, Boca Raton, Florida, USA. |
3 | Zhang, Y., Xu, C. and Lu, X. (2007), "Experimental study of hysteretic behaviour for concrete-filled square thin-walled steel tubular columns", J. Constr. Steel. Res., 63(3), 317-325. https://doi.org/10.1016/j.jcsr.2006.04.014. DOI |
4 | Zhuge, Y., Mills, J.E. and Ma, X. (2012), "Modelling of steel lattice tower angle legs reinforced for increased load capacity", Eng. Struct., 43, 160-168. https://doi.org/10.1016/j.engstruct.2012.05.017. DOI |
5 | Ban, H., Shi, G., Shi, Y. and Wang, Y. (2012), "Overall buckling behavior of 460 MPa high strength steel columns: Experimental investigation and design method", J. Constr. Steel. Res., 74, 140-150. https://doi.org/10.1016/j.jcsr.2012.02.013. DOI |
6 | Baran, E., Akis, T., Sen, G. and Draisawi, A. (2016), "Experimental and numerical analysis of a bolted connection in steel transmission towers", J. Constr. Steel. Res., 121, 253-260. https://doi.org/10.1016/j.jcsr.2016.02.009. DOI |
7 | Choi, J.Y. and Kwon, Y.B. (2018), "Direct strength method for high strength steel welded section columns", Steel Compos. Struct., 29(4), 509-526. https://doi.org/10.12989/scs.2018.29.4.509. DOI |
8 | Johnston, B.G. (1983), "Column buckling theory: historic highlights", J. Struct. Eng., 109(9), 2086-2096. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:9(2086). DOI |
9 | Dostanti, C. (2011), "Analysis, design and strengthening of communication towers", Ph.D. Dissertation; University of Windsor, Ontario, Canada. |
10 | Gayathri, B. and Ramalingam, R. (2018), "Joint stress based deflection limits for transmission line towers", Steel Compos. Struct., 26(1), 45-53. https://doi.org/10.12989/scs.2018.26.1.045. DOI |
11 | Kitipornchai, S. and Albermani, F.G. (2006), "Upgrading of transmission towers using tension bracing diaphragm", Proceedings of the 19th Australasian Conference on the Mechanics of Structures and Materials, Christchurch, New Zealand, November. |
12 | Szafran, J. and Rykaluk, K. (2016), "A full-scale experiment of a lattice telecommunication tower under breaking load", J. Constr. Steel. Res., 120, 160-175. https://doi.org/10.1016/j.jcsr.2016.01.006. DOI |
13 | Xie, Q. and Sun, L. (2012a), "Experimental study on the mechanical behavior and failure mechanism of a latticed steel transmission tower", J. Struct. Eng., 139(6), 1009-1018. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000722. DOI |
14 | ANSI/TIA 222-G (2005), Structural standard for antenna supporting structures and antennas, American National Standards Institute (ANSI); Arlington, USA. |
15 | Lu, C., Ma, X. and Mills, J.E. (2014), "The structural effect of bolted splices on retrofitted transmission tower angle members", J. Constr. Steel. Res., 95, 263-278. https://doi.org/10.1016/j.jcsr.2013.12.011. DOI |
16 | Lu, C., Ma, X. and Mills, J. E. (2015), "Modeling of retrofitted steel transmission towers", J. Constr. Steel. Res., 112, 138-154. https://doi.org/10.1016/j.jcsr.2015.04.005. DOI |
17 | Meshmesha, H.M., Kennedy, J.B., Sennah, K. and Moradi, S. (2019), "Static and dynamic analysis of guyed steel lattice towers", Struct. Eng. Mech., 69(5), 567-577. https://doi.org/10.12989/sem.2019.69.5.567. DOI |
18 | Mills, J.E., Ma, X. and Zhuge, Y. (2012), "Experimental study on multi-panel retrofitted steel transmission towers", J. Constr. Steel. Res., 78, 58-67. https://doi.org/10.1016/j.jcsr.2012.06.004. DOI |
19 | Park, J. H., Moon, B. W., Min, K. W., Lee, S. K. and Kim, C. K. (2007), "Cyclic loading test of friction-type reinforcing members upgrading wind-resistant performance of transmission towers", Eng. Struct., 29(11), 3185-3196. https://doi.org/10.1016/j.engstruct.2007.03.022. DOI |
20 | Ballio, G. and Mazzolani, F.M. (1983), Theory and Design of Steel Strucutres, Taylor & Francis, Oxford, Oxfordshire, England. |
21 | Fu, X., Li, H.N. and Li, G. (2016), "Fragility analysis and estimation of collapse status for transmission tower subjected to wind and rain loads", Struct. Saf., 58, 1-10. https://doi.org/10.1016/j.strusafe.2015.08.002. DOI |
22 | Ananthi, G., Roy, K. and Lim, J. B. (2019a), "Experimental and numerical investigations on axial strength of back-to-back built-up cold-formed steel angle columns", Steel Compos. Struct., 31(6), 601-615. https://doi.org/10.12989/scs.2019.31.6.601. DOI |
23 | Xie, Q. and Sun, L. (2012b), "Failure mechanism and retrofitting strategy of transmission tower structures under ice load", J. Constr. Steel. Res., 74, 26-36. https://doi.org/10.1016/j.jcsr.2012.02.003. DOI |
24 | Chen, S. (2017), Principles of Steel Structure Design, Science Press, Beijing, China. |
25 | Han, J., Zhao, X., Tang, Z., Ma, H. and Li, Z. (2017), "Study on the bearing capacity of cold-formed steel under different boundary conditions in transmission towers", Earthq. Struct., 12(6), 665-672. https://doi.org/10.12989/eas.2017.12.6.665. DOI |
26 | Komatsu, H., Ishii, K. and Fukushima, A. (2009), "Experimental study on buckling strength of angle steel compression members with built-up bracing", Kou kouzou rombunshuu, 16(62), 27-34. https://doi.org/10.11273/jssc.16.62_27. DOI |
27 | Lu, C., Ma, X. and Mills, J.E. (2018), "Cyclic performance of bolted cruciform and splice connectors in retrofitted transmission tower legs", Thin-Wall. Struct., 122, 264-285. https://doi.org/10.1016/j.tws.2017.10.020. DOI |
28 | GB 50017-2017 (2017), Standard for Design of Steel Structures, Ministry of Housing and Urban-Rural Development of the People's Republic of China (MOHURD); Architecture Industry Press of China, Beijing, China. |
29 | Alam, M.J. and Santhakumar, A.R. (1996), "Reliability analysis and full-scale testing of transmission tower", J. Struct. Eng., 122(3), 338-344. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(338). DOI |
30 | Albermani, F., Mahendran, M. and Kitipornchai, S. (2004), "Upgrading of transmission towers using a diaphragm bracing system", Eng. Struct., 26(6), 735-744. https://doi.org/10.1016/j.engstruct.2004.01.004. DOI |
31 | Ananthi, G., Roy, K., Chen, B. and Lim, J. B. (2019b), "Testing, simulation and design of back-to-back built-up cold-formed steel unequal angle sections under axial compression", Steel Compos. Struct., 33(4), 595-614. https://doi.org/10.12989/scs.2019.33.4.595. DOI |