Effect of web hole spacing on axial capacity of back-to-back cold-formed steel channels with edge-stiffened holes |
Chi, Yaohui
(College of Harbour and Coastal Engineering, Jimei University)
Roy, Krishanu (Department of Civil and Environmental Engineering, The University of Auckland) Chen, Boshan (Department of Civil and Environmental Engineering, The University of Auckland) Fang, Zhiyuan (Department of Civil and Environmental Engineering, The University of Auckland) Uzzaman, Asraf (School of Computing, Engineering and Physical Sciences, University of the West of Scotland) Ananthi, G. Beulah Gnana (Division of Structural Engineering, College of Engineering Guindy Campus, Anna University) Lim, James B.P. (Department of Civil and Environmental Engineering, The University of Auckland) |
1 | Stone, T. A. and LaBoube, R. A. (2005), "Behavior of cold-formed steel built-up I-sections", Thin-Wall. Struct., 43, 1805-1817. https://doi.org/10.1016/j.tws.2005.09.001. DOI |
2 | Zhang, J.H. and Young, B. (2015), "Numerical investigation and design of cold-formed steel built-up open section columns with longitudinal stiffeners", Thin-Wall. Struct., 89, 178-191. https://doi.org/10.1016/j.tws.2014.12.011. DOI |
3 | Fratamico, D.C., Torabian, S., Zhao, X., Rasmussen, K.J.R. and Schafer, B.W. (2018b), "Experimental study on the composite action in sheathed and bare built-up cold-formed steel columns", Thin-Wall. Struct., 127, 290-305. https://doi.org/10.1016/j.tws.2018.02.002. DOI |
4 | BS EN (2001), Tensile testing of metallic materials method of test at ambient temperature, British Standards Institution, London, UK. |
5 | Zhang, J.H. and Young, B. (2018), "Finite element analysis and design of cold-formed steel built-up closed section columns with web stiffeners", Thin-Wall. Struct., 131, 223-237. https://doi.org/10.1016/j.tws.2018.06.008. DOI |
6 | Chen, B., Roy, K., Uzzaman, A., Raftery, G.M., Nash, D.G., Clifton, C., Pouladi, P. and Lim, J.B.P. (2019), "Effects of edgestiffened web openings on the behaviour of cold-formed steel channel sections under compression", Thin-Wall. Struct., 144, 106307. https://doi.org/10.1016/j.tws.2019.106307. DOI |
7 | Zhang, J.H. and Young, B. (2012), "Compression tests of coldformed steel I-shaped open sections with edge and web stiffeners", Thin-Walled Struct., 52,1-11. https://doi.org/10.1016/j.tws.2011.11.006. DOI |
8 | Huang, X., Bai, L., Yang, J., Wang, F., Zhu, J. and Liu, Q. (2019), "Distortional-buckling analysis of channel sections with web stiffened by longitudinal ribs subjected to axial compression or bending", Thin-Wall. Struct., 144, 106322. https://doi.org/10.1016/j.tws.2019.106322. DOI |
9 | Dabaon, M., Ellobody, E. and Ramzy, K. (2015b), "Nonlinear behaviour of built-up cold-formed steel section battened columns", J. Constr. Steel Res., 110, 16-28. https://doi.org/10.1016/j.jcsr.2015.03.007. DOI |
10 | Fratamico, D.C., Torabian, S., Zhao, X., Rasmussen, K.J.R. and Schafer, B.W. (2018a), "Experiments on the global buckling and collapse of built-up cold-formed steel columns", J. Constr. Steel Res., 144, 65-80. https://doi.org/10.1016/j.jcsr.2018.01.007. DOI |
11 | Li, Y., Li, Y., Wang, S. and Shen, Z. (2014), "Ultimate loadcarrying capacity of cold-formed thin-walled columns with built-up box and I section under axial compression", Thin-Wall. Struct., 79, 202-217. https://doi.org/10.1016/j.tws.2014.02.003. DOI |
12 | Moen, C.D. and Schafer, B.W. (2008), "Experiments on coldformed steel columns with holes", Thin-Wall. Struct., 46, 1164-1182. https://doi.org/10.1016/j.tws.2008.01.021. DOI |
13 | Moen, C.D. and Schafer, B.W. (2011), "Direct strength method for design of cold-formed steel columns with holes", J. Struct. Eng., 137(5), 559-570. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000310. DOI |
14 | Roy, K., Lau, H.H. and Lim, J.B.P. (2019), "Numerical investigations on the axial strength of back-to-back gapped built-up cold-formed stainless steel channels", Adv. Struct. Eng., 22(10), 2289-2310. https://doi.org/10.1177/1369433219837390. DOI |
15 | Roy, K., Ting, T.C.H., Lau, H.H. and Lim, J.B.P. (2018b), "Effect of thickness on the behaviour of axially loaded back-to-back cold-formed steel built-up channel sections-experimental and numerical investigation", Struct., 16, 327-346. https://doi.org/10.1016/j.istruc.2018.09.009. DOI |
16 | Roy, K., Ting, T.C.H., Lau, H.H. and Lim, J.B.P. (2018c), "Nonlinear behavior of back-to-back gapped built-up coldformed steel channel sections under compression", J. Constr. Steel Res., 147, 257-276. https://doi.org/10.1016/j.jcsr.2018.04.007. DOI |
17 | Zhang, X., Liu, S., Zhao, M. and Chiew, S.P. (2016), "Residual stress of cold-formed thick-walled steel rectangular hollow sections", Steel Compos. Struct., 22(4), 837-853. https://doi.org/10.12989/scs.2016.22.4.837. DOI |
18 | Zhou, W. and Jiang, L. (2017), "Distortional buckling of coldformed lipped channel columns subjected to axial compression", Steel Compos. Struct., 23(3), 331-338. https://doi.org/10.12989/scs.2017.23.3.331. DOI |
19 | Ye, J., Hajirasouliha, I. and J. Becque. (2018a), "Experimental investigation of local-flexural interactive buckling of coldformed steel channel columns", Thin-Wall. Struct., 125, 245-258. https://doi.org/10.1016/j.tws.2018.01.020. DOI |
20 | Ting, T.C.H., Roy, K., Lau, H.H. and Lim, J.B.P. (2018), "Effect of screw spacing on behavior of axially loaded back-to-back coldformed steel built-up channel sections", Adv. Struct. Eng., 21, 474-487. https://doi.org/10.1177/1369433217719986. DOI |
21 | Wang, C.G., Guo, Q.L., Zhang, Z.G. and Guo, Y.T. (2019), "Experimental and numerical investigation of perforated coldformed steel built-up I-section columns with web stiffeners and complex edge stiffeners", Adv. Struct. Eng., 22, 2205-2221. https://doi.org/10.1177/1369433219836174. DOI |
22 | Ye, J., Mojtabaei, S.M. and I. Hajirasouliha, I. (2018b), "Localflexural interactive buckling of standard and optimised coldformed steel columns", J. Constr. Steel Res., 144, 106-118. https://doi.org/10.1016/j.jcsr.2018.01.012. DOI |
23 | Anbarasu, M. and Venkatesan, M. (2019), "Behaviour of coldformed steel built-up I-section columns composed of four Uprofiles", Adv. Struct. Eng., 22(3), 613-625. https://doi.org/10.1177/1369433219865696. DOI |
24 | Orlando, Maurizio, Lavacchini, Giovanni, Hwang, Soon-Hee. and Spinelli, Paolo. (2017), "Experimental capacity of perforated cold-formed steel open sections under compression and bending", Steel Compos. Struct., 24(2), 201-211. https://doi.org/10.12989/scs.2017.24.2.201. DOI |
25 | Anbarasu, M., Kanagarasu, K. and Sukumar, S. (2014), "Investigation on the behaviour and strength of cold-formed steel web stiffened built-up battened columns", Mater. Struct., 12, 4029-4038. https://doi.org/10.1177/1369433218795568. DOI |
26 | ABAQUS (2018), Version 6.14-2, SIMULIA, Providence, RI, USA. |
27 | AISI S100-16 (2016), North American Specification for the Design of Cold-Formed Steel Structural Members, American Iron and Steel Institute, Washington D.C., USA. |
28 | Ananthi, G.B.G., Roy, K., Chen, B. and Lim, J.B.P. (2019), "Testing, simulation and design of back-to-back built-up coldformed steel unequal angle sections under axial compression", Steel Compos. Struct., 33(4), 595-614. https://doi.org/10.12989/scs.2019.33.4.595. DOI |
29 | AS/NZS 3000: 2018 (2018), Australian/New Zealand Standard: Cold-Formed Steel Structures, Jointly published by Standards Australia, Sydney, Australia; Australia and Standards New Zealand, Wellington, New Zealand. |
30 | Dabaon, M., Ellobody, E. and Ramzy, K. (2015a), "Experimental investigation of built-up cold-formed steel section battened columns", Thin-Wall. Struct., 92, 137-145. https://doi.org/10.1016/j.tws.2015.03.001. DOI |
31 | Lu, Y., Zhou, T.H., Li, W.C. and Wu, H.H. (2017), "Experimental investigation and a novel direct strength method for coldformed built-up I-section columns", Thin-Wall. Struct., 112, 125-139. https://doi.org/10.1016/j.tws.2016.12.011. DOI |
32 | Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347. DOI |
33 | Roy, K., Ting, T.C.H., Lau, H.H. and Lim, J.B.P. (2018a), "Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections", Steel Compos. Struct., 28(2), 233-250. https://doi.org/10.12989/scs.2018.28.2.233. DOI |
![]() |