1 |
Li, G., Zhu, L.H. and Li, H.N. (2019), "Displacement-based seismic design for buildings installed hysteretic dampers with hardening post-yielding stiffness", Adv. Struct. Eng., 22(16), 3420-3434. https://doi.org/10.1177/1369433219852715.
DOI
|
2 |
Dong, Z.Q., Li, G. and Li, H.N. (2021), "Dynamic test for collapse prevention performance of a low-ductility steel concentrically braced frame". Eng. Struct., 240, 112420.
DOI
|
3 |
Xu, Y.L. and Ng, C.L. (2008), "Seismic protection of a building complex using variable friction damper: Experimental investigation", J. Eng. Mech., 134(8), 637-649. https://doi.org/10.1061/(ASCE)0733-9399(2008)134:8(637).
DOI
|
4 |
Mirzai, N.M. and Hu, J.W. (2019), "Pilot study for investigating the inelastic response of a new axial smart damper combined with friction devices", Steel Compos. Struct., 32(3), 373-388. https://doi.org/10.12989/scs.2019.32.3.373.
DOI
|
5 |
Park, J.H., Min, K.W., Chung, L., Lee, S.K., Kim, H.S. and Moon, B.W. (2007), "Equivalent linearization of a friction damperbrace system based on the probability distribution of the extremal displacement", Eng. Struct., 29(6), 1226-1237.
DOI
|
6 |
Richter, P.J., Nims, D.K., Kelly, J.M. and Kallenbach, R.M. (1990). "The EDR-energy dissipating restraint. A new device for mitigation of seismic effects", Proceedings of the 1990 SEAOC Convention.
|
7 |
Soong, T.T. and Dargush, G.F. (1997), Passive energy dissipation systems in structural engineering, John Wiley & Sons, New York.
|
8 |
Wu, B. and Ou, J. (2003), "The pseudo-viscous frictional energy dissipator: a new device for mitigating seismic effects", Earthq. Eng. Struct. D., 32(1), 31-48. https://doi.org/10.1002/eqe.213.
DOI
|
9 |
Cao, L., Laflamme, S., Taylor, D. and Ricles, J. (2016), "Simulations of a Variable Friction Device for Multihazard Mitigation", J. Struct. Eng., 142(12), H4016001.
DOI
|
10 |
Zhu, L.H., Li, G. and Li, H.N. (2018), "A lattice-shaped friction device and its performance in weak-story prevention", Struct. Des. Tall Spec. Build., 27(15), e1535. https://doi.org/10.1002/tal.1535.
DOI
|
11 |
Filiatrault, A. and Cherry, S. (1987), "Performance Evaluation of Friction Damped Braced Steel Frames Under Simulated Earthquake Loads", Earthq. Spectra, 57-78. https://doi.org/10.1193/1.1585419.
DOI
|
12 |
Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Skelton, R.E., Soong, T.T., Spencer, B.F. and Yao, J.T.P. (1997), "Structural control: past, present, and future", J. Eng. Mech., 123(9), 897-971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897).
DOI
|
13 |
Lee, C.H., Ryu, J., Kim, D.H. and Ju, Y.K. (2018), "Improving seismic performance of non-ductile reinforced concrete frames through the combined behavior of friction and metallic dampers", Eng. Struct., 172, 304-320. https://doi.org/10.1016/j.engstruct.2018.06.045.
DOI
|
14 |
Anoushehei, M., Daneshjoo, F., Mahboubi, S. and Khazaeli, S. (2017), "Experimental investigation on hysteretic behavior of rotational friction dampers with new friction materials", Steel Compos. Struct., 24(2), 239-248. https://doi.org/10.12989/scs.2017.24.2.239.
DOI
|
15 |
Mirtaheri, M., Zandi, A.P., Samadi, S.S. and Samani, H.R. (2011), "Numerical and experimental study of hysteretic behavior of cylindrical friction dampers", Eng. Struct., 33(12), 3647-3656. https://doi.org/10.1016/j.engstruct.2011.07.029.
DOI
|
16 |
National Standard of the People's Republic of China (2010), Code for seismic design of buildings: GB 50011-2010, China Architecture & Building Press, Beijing.
|
17 |
Aiken, I.D. (1990), Earthquake simulator testing and analytical studies of two energy-absorbing systems for multistory structures, Earthquake Engineering Research Center, College of Engineering, University of California.
|
18 |
Ng, C.L. and Xu, Y.L. (2006), "Seismic response control of a building complex utilizing passive friction damper: Experimental investigation", Earthq. Eng. Struct. D., 35(6), 657-677. https://doi.org/10.1002/eqe.549.
DOI
|
19 |
Okazaki, T., Lignos, D.G., Hikino, T. and Kajiwara, K. (2013), "Dynamic Response of a Chevron Concentrically Braced Frame", J. Struct. Eng., 139(4), 515-525. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000679.
DOI
|
20 |
Sadjadi, M., Fadaee, M., Ghannad, M.A. and Jahankhah, H. (2019), "Numerical Study of Stiff Diaphragm Walls Used to Improve the Performance of Rocking Foundation Systems", J. Earthq. Eng., 1-23. https://doi.org/10.1080/13632469.2019.1631233.
DOI
|
21 |
Eldin, M.N., Kim, J. and Kim, J. (2018), "Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost", Steel Compos. Struct. 27(5), 633-646.
DOI
|
22 |
Lee, C.H., Kim, J., Kim, D.H., Ryu, J. and Ju, Y.K. (2016), "Numerical and experimental analysis of combined behavior of shear-type friction damper and non-uniform strip damper for multi-level seismic protection", Eng. Struct., 114, 75-92. https://doi.org/10.1016/j.engstruct.2016.02.007.
DOI
|
23 |
Macrae, G.A., Kimura, Y. and Roeder, C. (2004), "Effect of Column Stiffness on Braced Frame Seismic Behavior", J. Struct. Eng., 130(130), 381-391. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(381).
DOI
|
24 |
Li, H.N. and Li, G. (2007), "Experimental study of structure with "dual function" metallic dampers", Eng. Struct., 29(8), 1917- 1928. https://doi.org/10.1016/j.engstruct.2006.10.007.
DOI
|
25 |
Lee, C.H., Ryu, J., Oh, J., Yoo, C.H. and Ju, Y.K. (2016), "Friction between a new low-steel composite material and milled steel for SAFE Dampers", Eng. Struct., 122, 279-295. https://doi.org/10.1016/j.engstruct.2016.04.056.
DOI
|
26 |
Lee, J., Kang, H. and Kim, J. (2017), "Seismic performance of steel plate slit-friction hybrid dampers", J. Constr. Steel Res., 136(5), 128-139. https://doi.org/10.1016/j.jcsr.2017.05.005.
DOI
|
27 |
Li, G. and Li, H.N. (2013), "Experimental study and application of metallic yielding-friction damper", J. Earthq. Tsunami, 7(3), 132-141. https://doi.org/10.1142/S1793431113500127.
DOI
|
28 |
Li, G., Dong, Z.Q. and Li, H.N. (2018), "Simplified collapse prevention evaluation for the reserve system of low-ductility steel concentrically braced frames". J. Struct. Eng. - ASCE, 144(7), 04018071. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002062.
DOI
|
29 |
Monir, H.S. and Zeynali, K. (2013), "A modified friction damper for diagonal bracing of structures", J. Constr. Steel Res., 87(6), 17-30. https://doi.org/10.1016/j.jcsr.2013.04.004.
DOI
|