Browse > Article
http://dx.doi.org/10.12989/scs.2021.40.1.045

Nonlinear seismic behavior of elliptic-braced moment resisting frame using equivalent braced frame  

Jouneghani, Habib Ghasemi (Department of Civil Engineering, Faculty of Civil Engineering, Shahid Rajaee Teacher Training University)
Haghollahi, Abbas (Department of Civil Engineering, Faculty of Civil Engineering, Shahid Rajaee Teacher Training University)
Kalaleh, Mohammad Talebi (Department of Civil Engineering, Sharif University of Technology)
Beheshti-Aval, S. Bahram (Department of Civil Engineering, Faculty of Civil Engineering, K. N. Toosi University of Technology)
Publication Information
Steel and Composite Structures / v.40, no.1, 2021 , pp. 45-64 More about this Journal
Abstract
Recently, the elliptic-braced moment resisting frame (ELBRF) which is a new lateral bracing system installed in the middle bay of the frame in the facade of buildings is introduced. This system not only prevents a solution for opening space problem in view of architectural aspects, but also improves the structural behavior. The main drawback of its using in view of numerical modeling in multistory buildings is lack of curved frame element in design and analysis software. To overcome this shortcoming, in this paper, for the first time, an equivalent element for elliptic brace is presented for ELBRF through a laboratory program and nonlinear finite element analysis, which will contribute to its accurate and easy modelling and design. To evaluate the hysteresis behavior of the equivalent element, an experimental test on a ½ scale was conducted for a single-story single-bay ELBRF specimen under cyclic quasi-static loading and the results were compared with those for the equivalent element in a story base model. Good agreement was observed between the experimental and analytical outcomes. The seismic demand analyses of ELBRF and frame with equivalent bracing system in 3, 5, 7, and 10 stories were carry out through different loading patterns in Nonlinear Static Pushover Analysis (NSPA) and Nonlinear Time History Analysis (NTHA) with 20 earthquake records using OpenSees software. Story drift, displacement, and story shear were evaluated. Relatively accurate estimations were achieved by NSPA in comparison with NTHA. Also, the seismic performance of the equivalent element for the ELBRF system against earthquake was examined and then response modification factor (R factor) was acquired. The values of 8.5 and 12.2 for the R factor were calculated at the ultimate and the allowable stress limit states, respectively.
Keywords
elliptic braced moment resisting frame; equivalent element; seismic demand; nonlinear static pushover analysis; nonlinear time history analysis; response modification factor;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Christopoulos, C., Tremblay, R., Kim, H.J. and Lacerte, M. (2008), "Self-Centering Energy Dissipative Bracing System for the Seismic Resistance of Structures: Development and Validation", J. Struct. Eng., 134(1). https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(96).   DOI
2 Shaw, S.M., Kanvinde, A.M. and Fell, B.V. (2010), "Earthquake-induced net section fracture in brace connections-experiments and simulations", J. Constr. Steel Res., 66(12), 1492-1501. https://doi.org/10.1016/j.jcsr.2010.06.002.   DOI
3 Kang, C.K. and Choi, B.J. (2011), "New approach to evaluate the response modification factors for steel moment resisting frames", Int. J. Steel Struct., 11(3), 275-286. https://doi.org/10.1007/s13296-011-3003-1.   DOI
4 Bertero, V.V., and Popov, E.P. (1997), "Seismic behaviour of ductile moment-resisting reinforced concrete frames", Reinforced concrete structures in seismic zones. Detroit: ACI Publication SP-53, American Concrete Institute.
5 Alavi, E. and Nateghi. F. (2013), "Experimental study on diagonally stiffened steel plate shear walls with central perforation", J. Constr. Steel Res., 89, 9-20. https://doi.org/10.1016/j.jcsr.2013.06.005.   DOI
6 Applied Technology Council. (1992), "Guidelines for cyclic seismic testing of component of steel structures". Redwood City, CA: ATC-24.
7 BHRC: Iranian Code of Practice for Seismic Resistance Design of Buildings, Standard No. 2800, 4rd ed., (2013), Building and Housing Research Center.
8 Asgarian, B., Aghakouchack, A. and Bea, R. (2005), "Inelastic postbuckling and cyclic behavior of tubular braces", J. Offshore Mech. Arctic Eng., 127, 256-262. https://doi.org/10.1115/1.1904637.   DOI
9 Attia, W.A. and Irheem, M.M.M. (2016), "Boundary condition effect on response modification factor of X-braced steel frames", HBRC J, 14(1), 104-121. https://doi.org/10.1016/j.hbrcj.2016.03.002.   DOI
10 Azad, S. and Topkaya, C. (2017), "A review of research on steel eccentrically braced frames", J. Constr. Steel Res., 128, 53-73. https://doi.org/10.1016/j.jcsr.2016.07.032.   DOI
11 CBC: California Building Code, International Building Code (2007).
12 Asgarian, B. Sadrinezhad, A. and Alanjari, P. (2010), "Seismic performance evaluation of steel moment resisting frames through incremental dynamic analysis", J. Constr. Steel Res., 66(2), 178-190. https://doi.org/10.1016/j.jcsr.2009.09.001.   DOI
13 Xu, L.H., Xie, X.S. and Li, Z.X. (2018), "Development and experimental study of a self-centering variable damping energy dissipation brace", J. Eng. Struct., 160(1), 270-280. https://doi.org/10.1016/j.engstruct.2018.01.051.   DOI
14 Abdollahzadeh, G. and Abbasi, M. (2015), "Response modification factor of suspended zipper braced frames", J. Steel Compos. Struct., 18(1), 165-185. https://doi.org/10.12989/scs.2015.18.1.165.   DOI
15 Antoniou, S. and Pinho, R. (2004), Software Seismosignal.
16 Balendra, T. and Huang, X. (2003), "Overstrength and ductility factors for steel frames designed according to BS 5950", J. Struct. Eng., 129(8), 1019-1035. https://doi.org/10.1061/(ASCE)07339445(2003)129:8.   DOI
17 Daneshmand, A. and Hashemi, B.H. (2012), "Performance of intermediate and long links in eccentrically braced frames", J. Constr. Steel Res., 70(3), 167-176. https://doi.org/10.1016/j.jcsr.2011.10.011.   DOI
18 Dowrick, D.J. (1977), "Earthquake resistant design: A manual for engineers and architects". New York: Wiley.
19 Di Cesare, A., Ponzo, F.C., Lamarucciola, N. and Nigro, D. (2020), "Experimental seismic response of a resilient 3-storey post-tensioned timber framed building with dissipative braces", J. Bull. Earth. Eng., 18(15), 6825-6848. https://doi.org/10.1007/s10518-020-00969-y.   DOI
20 Di Cesare, A. and Ponzo, F.C. (2017), "Seismic retrofit of reinforced concrete frame buildings with hysteretic bracing systems: design procedure and behaviour factor", J. Shock Vib., 17, 1-20. https://doi.org/10.1155/2017/2639361.   DOI
21 Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016), "Theoretical assessment of the behavior of cable bracing system with central steel cylinder", J. Adv. Struct. Eng., 19(3), 463-472. https://doi.org/10.1177/1369433216630052.   DOI
22 Fanaie, N. and Ezzatshoar, S. (2014), "Studying the seismic behavior of gate braced frames by incremental dynamic analysis (IDA)", J. Constr. Steel Res., 99, 111-120. https://doi.org/10.1016/j.jcsr.2014.04.008.   DOI
23 Ghasemi, J.H. and Haghollahi, A. (2020), "Experimental study on hysteretic behavior of steel moment frame equipped with elliptical brace", Steel Compos. Struct., 34(6), 891-907. https://doi.org/10.12989/scs.2019.31.2.149.   DOI
24 Akiyama, H. (1985), "Earthquake resistant limit state design for buildings". Tokyo: University of Tokyo Press.
25 Ghasemi, J.H., Haghollahi, A., Moghaddam, H. and Sarvghad Moghadam, A.R. (2016), "Study of the seismic performance of steel frames in the elliptic bracing", JVE Int. LTD. J. Vibro Eng., 18(5), 2974-2985. https://doi.org/10.21595/jve.2016.16858.   DOI
26 Gerami, M., Mashayekhi, A.H. and Siahpolo, N. (2017) "Computation of R Factor for Steel Moment Frames by Using Conventional and Adaptive Pushover Methods", Arab J. Sci. Eng., 42, 1025-1037. https://doi.org/10.1007/s13369-016-2257-5.   DOI
27 Vetr, M.G., Nouri, A.R. and Kalantari, A. (2016), "Seismic evaluation of rocking structures through performance assessment and fragility analysis", J. Earth. Eng. Eng. Vib., 15, 115-127. https://doi.org/10.1007/s11803-016-0309-1.   DOI
28 Han, S.W., Kim, W.T. and Foutch, D.A. (2007), "Seismic behavior of HSS bracing members according towidth-thickness ratio under symmetric cyclic loading", J. Struct. Eng. ASCE, 133(2), 264-273. https://doi.org/10.1061/(ASCE)07339445(2007)133:2(264).   DOI
29 Ibarra, L.F. and Krawinkler, H. (2005), "Global collapse of frame structures under seismic excitations", Technical Report 152, The John A. Blume Earthquake Engineering Research Center, Department of Civil Engineering, Stanford University, Stanford, CA.
30 IBC: Structure Engineering Design Provision, International Building Code (2015).
31 Wang, F., Su, M.Z., Guo, Y. and Li, S. (2016), "Cyclic behavior of y-shaped eccentrically braced frames fabricated with high-strength steel composite", J. Constr. Steel Res., 120(2), 176-187. https://doi.org/10.1016/j.jcsr.2016.01.007.   DOI
32 Xu, LH., Fan, XW. and Li, ZX. (2017) "Cyclic behavior and failure mechanism of self-centering energy dissipation braces with pre-pressed combination disc springs", J. Earth. Eng. Struct. Dyn., 46(7), 1065-1080. https://doi.org/10.1002/eqe.2844.   DOI
33 Xu, L.H., Xie, X.S. and Li, Z.X. (2018), "A self-centering brace with superior energy dissipation capability: development and experimental study", J. Smart Mater. Struct., 27(9). https://doi.org/10.1088/1361-665X/aad5b0.   DOI
34 Lehman, D.E., Roeder, C.W., Herman, D., Johnson, S. and Kotulka, B. (2008), "Improved Seismic Performance of Gusset Plate Connections", J. Struct. Eng. ASCE, 134(6), 890-901. https://doi.org/10.1061/(ASCE)07339445(2008)134:6(890).   DOI
35 Berman, J.W. and Bruneau, M. (2007), "Experimental and analytical investigation of tubular links for eccentrically braced frames", J. Eng. Struct., 29(8), 1929-1938. https://doi.org/10.1016/j.engstruct.2006.10.012.   DOI
36 FEMA P695 (2009), Quantification of Building Seismic Performance Factors. FEMA P695. prepared by the Applied Technology Council for the Federal Emergency Management Agency, Washington, D.C.
37 Izadinia, M., Rahgozar, M.A. and Mohammadrezaei, O. (2012), "Response modification factor for steel moment-resisting frames by different pushover analysis methods", J. Constr. Steel Res., 79, 83-90. https://doi.org/10.1016/j.jcsr.2012.07.010.   DOI
38 Khoshnoudian, F. and Kafaeikivi, M. (2016), "Evaluation of Proposed Lateral Load Pattern for Estimating Seismic Demands on RC-Tall Buildings with Shear Walls in Pushover Analysis", J. Adv. Struct. Eng., 14(6), 1017-1029. https://doi.org/10.1260/1369-4332.14.6.1017.   DOI
39 Konai, S., Sengupta, A. and Deb, K. (2018), "Behavior of Braced Excavation in Sand Under a Seismic Condition: Experimental and Numerical Studies", J. Earth. Eng. Eng. Vib., 17(2), 311-324. https://doi.org/10.1007/s11803-018-0443-z.   DOI
40 Longo, A., Montuori, R. and Piluso, V. (2008b), "Influence of Design Criteria on Seismic Reliability of X-Braced Frames", J. Earth. Eng., 12(3), 406-431. https://doi.org/10.1080/13632460701457231.   DOI
41 Mahmoudi, M. and Zaree, M. (2010), "Evaluating response modification factors of concentrically braced steel frames" J. Constr. Steel Res. 66(10), 1196-1204. DOI: https://doi.org/10.1016/j.jcsr.2010.04.004.   DOI
42 Zahiri-Hashemi, R., Kheyroddin, A. and Shayanfar, M.A. (2014), "Effect of Inelastic Behavior on the Code-Based Seismic Lateral Force Pattern of Buckling Restrained Braced Frames", Arab J. Sci. Eng., 39, 8525-8536. https://doi.org/10.1007/s13369-014-1433-8.   DOI
43 Mahmoudi, M. and Abdi, M.G. (2012) "Evaluating response modification factors of TADAS frames", J. Constr. Steel Res., 71, 162-170. https://doi.org/10.1016/j.jcsr.2011.10.015.   DOI
44 Mansour, N., Christopoulos, C., and Tremblay, R. (2011), "Experimental Validation of Replaceable Shear Links for Eccentrically Braced Steel Frames", J. Struct. Eng., 137(10), 1141-1152. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000350.   DOI
45 Goel, R.K. and Chopra, A.K. (2004), "Evaluation of modal and FEMA pushover analyses: SAC buildings", J. Earth. Spectra, 20, 225-254. https://doi.org/10.1193/1.1646390.   DOI
46 Ibarra, L.F. and Krawinkler, H. (2005), "Global collapse of frame structures under seismic excitations", Pacific Earthquake Engineering Research (PEER) Center, Berkeley, CA.
47 Kim, J. and Choi, H. (2005), "Response modification factors of chevron-braced frames", J. Eng. Struct., 27(2), 285-300. https://doi.org/10.1016/j.engstruct.2004.10.009.   DOI
48 Longo, A., Montuori, R. and Piluso, V. (2008a), "Failure Mode Control of X-Braced Frames under Seismic Actions", J. Earth. Eng., 12(5), 728-759. https://doi.org/10.1080/13632460701572955.   DOI
49 Mazzoni, S., McKenna, F., Scott, M.H. and Fenves, G.L. (2013), "Jeremic B. Opensees command language manual", MHUD: Iranian National Building Code, Part 10, Steel Structure Design, Tehran (Iran), (2013), Ministry of Housing and Urban Development.
50 Newmark, NM. and Hall, WJ. (1982), Earthquake spectra and design. El Cerrito, Calif: J. Earthq. Eng. Res. Institute.
51 Speicher, M.S. and Iii, J.L.H. (2016), "Collapse prevention seismic performance assessment of new eccentrically braced frames using ASCE 41", J. Eng. Struct., 117(6), 344-357. https://doi.org/10.1016/j.engstruct.2016.02.018.   DOI
52 Nip, K.H., Gardner, L. and Elghazouli, A.Y. (2010), "Cyclic testing and numerical modelling of carbon steel and stainless steel tubular bracing members", J. Eng. Struct., 32(2) 424-441. https://doi.org/10.1016/j.engstruct.2009.10.005.   DOI
53 Palazzo, G., Lopez-Almansa, F., Cahis, X. and Crisafulli, F. (2009), "A low-tech dissipative buckling restrained brace. Design, analysis, production and testing", J. Eng. Struct., 31(9), 2152-2161. https://doi.org/10.1016/j.engstruct.2009.03.015.   DOI
54 Paulay, T. and Priestley, M.J.N. (1995), "Seismic design of reinforced concrete and masonry buildings", New York: Wiley.
55 Mazzoni, S., et al. (2006), "OpenSees Command Language Manual. Pacific Earthquake Engineering Research (PEER) Center" Berkeley.
56 Naderpour, M.N. and Aghakouchak, A. (2018), "Probabilistic damage assessment of concentrically braced frames with built up braces", J. Constr. Steel Res., 147, 191-202. https://doi.org/10.1016/j.jcsr.2018.04.011.   DOI
57 Rosenblueth, E. (1980), "Design of earthquake resistant structures". London: Pentech Press.
58 Tremblay, R. (2008), "Influence of brace slenderness on the fracture life of rectangular tubular steel bracing members subjected to seismic inelastic loading", Proceedings of the ASCE, Structures Congress, Vancouver, Canada.
59 Wakabayashi, M. (1986), "Design of earthquake resistant buildings". New York: McGraw-Hill.
60 FEMA 350 (2001), Seismic Design Criteria for New MomentResisting Steel Frame Construction. Federal Emergency Management Agency, FEMA.
61 Fanaie, N., Aghajani, S. and Dizaj, E.A. (2016), "Strengthening of moment-resisting frame using cable-cylinder bracing", J. Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177/1369433216649382.   DOI
62 Mastrandrea, L. and Piluso, V. (2009), "Plastic design of eccentrically braced frames, II: Failure mode control", J. Constr. Steel Res., 65(5), 1015-1028. https://doi.org/10.1016/j.jcsr.2008.10.001.   DOI
63 Ghasemi, J.H., Haghollahi, A., Moghaddam, H. and Sarvghad Moghadam, A.R. (2019), "Assessing seismic performance of elliptic braced moment resisting frame through pushover method", J. Rehabilit. Civil Eng. (JRCE), 2, 1-17. https://doi.org/10.22075/JRCE.2018.13030.1232.   DOI
64 Nobahara, E., Farahib, M. and Mofid, M. (2016), "Quantification of seismic performance factors of the buildings consisting of disposable knee bracing frames", J. Constr. Steel Res., 124, 132-141. https://doi.org/10.1016/j.jcsr.2016.05.007.   DOI
65 Engineers, A.S.o.C. (2005), Minimum design loads for buildings and other structures, Vol 7 ed. Amer Society of Civil Engineers (ASCE).
66 Fakhraddini, A., Saffari, H. and Fadaee, M.J. (2019), "Peak displacement patterns for the performance-based seismic design of steel eccentrically braced frames", J. Earth. Eng. Eng., 18(2), 379-393. https://doi.org/10.1007/s11803-019-0510-0.   DOI
67 Fanaie, N. and Dizaj, E.A. (2014), "Response modification factor of the frames braced with reduced yielding segment BRB", J. Struct. Eng. Mech., 50, 1-17. https://doi.org/10.12989/sem.2014.50.1.001.   DOI
68 Fell, B.V., Kanvinde, A.M., Deierlein, G.G. and Myers, A.T. (2009), "Experimental investigation of inelastic cyclic buckling and fracture of steel braces", J. Struct. Eng. ASCE, 135(1), 19-32. https://doi.org/10.1061/(ASCE)07339445(2009)135:1(19).   DOI
69 FEMA 356 (2000), Commentary for the Seismic Rehabilitation of Buildings. Federal Emergency Management Agency (FEMA), Washington, DC, FEMA.
70 Ghasemi J.H. and Haghollahi, A. (2020), "Assessing the seismic behavior of Steel Moment Frames equipped by elliptical brace through incremental dynamic analysis (IDA)", J. Earth. Eng. and Eng. Vibration (EEEV), 19(2), 435-449. https://doi.org/10.1007/s11803-020-0572-z.   DOI
71 Longo, A., Montuori, R. and Piluso, V. (2008), "Plastic design of seismic resistant V-braced frames", J. Earth. Eng., 12(8), 1246-1266. https://doi.org/10.1080/13632460802211867.   DOI
72 Ghasemi, J.H., Haghollahi, A. and Beheshti-Aval, S.B. (2020) "Experimental study of Failure Mechanisms in Elliptic-Braced Steel Frame", Steel Compos. Struct., 37(2), 175-191. https://doi.org/10.12989/scs.2020.37.2.175.   DOI
73 Ghasemi, J.H. and Haghollahi, A. (2020) "Experimental and analytical study in determining the seismic demand and performance of the ELBRF-E and ELBRF-B braced frames", Steel Compos. Struct., 37(5), 571-587. https://doi.org/10.12989/scs.2020.37.5.571.   DOI
74 Kheyroddin, A. and Mashhadiali, N. (2018), "Response modification factor of concentrically braced frames with hexagonal pattern of braces", J. Constr. Steel Res., 148, 658-668. https://doi.org/10.1016/j.jcsr.2018.06.024.   DOI
75 Uang, C.M. (1991), "Establishing R (or Rw) and Cd factors for building seismic provisions", J. Struct. Eng., 117(1), 19-28. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:1(19).   DOI