Browse > Article
http://dx.doi.org/10.12989/scs.2020.37.1.075

Behavior of composite CFST beam-concrete column joints  

Kim, Seung-Eock (Department of Civil and Environmental Engineering, Sejong University)
Choi, Ji-Hun (Department of Civil and Environmental Engineering, Sejong University)
Pham, Thai-Hoan (Department of Concrete Structures, National University of Civil Engineering)
Truong, Viet-Hung (Faculty of Civil Engineering, Thuyloi University)
Kong, Zhengyi (School of Civil Engineering and Architecture, Anhui University of Technology)
Duong, Nguyen-The (Faculty of Civil Engineering, Duy Tan University)
Vu, Quang-Viet (Faculty of Civil Engineering, Vietnam Maritime University)
Publication Information
Steel and Composite Structures / v.37, no.1, 2020 , pp. 75-90 More about this Journal
Abstract
This paper introduces a new composite joint, which is the composite CFST beam- concrete column joint, and it is more convenient for transportation and erection than conventionally welded joints. The main components of this joint include steel H-beams welded with CFST beams, reinforced concrete columns, and reinforced concrete slabs. The steel H-beams and CFST beams are connected with a concrete slab using shear connectors to ensure composite action between them. An experimental investigation was conducted to evaluate the proposed composite joint performance. A three-dimensional (3D) finite element (FE) model was developed and analyzed for this joint using the ABAQUS/explicit. The FE model accuracy was validated by comparing its results with the relevant test results. Additionally, the parameters that consisted of the steel box beam thickness, concrete compressive strength, steel yield strength, and reinforcement ratio in the concrete slab were considered to investigate their influence on the proposed joint performance.
Keywords
concrete-filled steel tubular; composite joints; finite element model; ABAQUS/explicit;
Citations & Related Records
Times Cited By KSCI : 16  (Citation Analysis)
연도 인용수 순위
1 ABAQUS (2014), Analysis user's manual version 6.14, Dassault Systemes
2 Ataei, A., Bradford, M.A. and Valipour, H.R. (2015), "Experimental study of flush end plate beam-to-CFST column composite joints with deconstructable bolted shear connectors", Eng. Struct., 99, 616-630. https://doi.org/10.1016/j.engstruct.2015.05.012.   DOI
3 Eom, S.S., Vu, Q.V., Choi, J.H., Park, H.H. and Kim, S.E. (2019), "Flexural behavior of concrete-filled double skin steel tubes with a joint", J. Constr. Steel Res., 155, 260-272. https://doi.org/10.1016/j.jcsr.2018.12.012.   DOI
4 Eom, S.S., Vu, Q.V., Choi, J.H., George, P. and Kim, S.E. (2019), "Behavior of composite CFST beam-steel column joints", Steel Compos. Struct., 32(5), 583-594. https://doi.org/10.12989/scs.2019.32.5.583.   DOI
5 Guo, L., Wang, J., Wang, W. and Duan, M. (2019), "Seismic evaluation and calculation models of CFDST column blind bolted to composite beam joints with partial shear interaction", Eng. Struct., 196, 109269. https://doi.org/10.1016/j.engstruct.2019.06.005.   DOI
6 Han, L.H., Tao, Z., Huang, H. and Zhao, X.L. (2004), "Concrete-filled double skin (SHS outer and CHS inner) steel tubular beam-columns", Thin-Wall. Struct., 42, 1329-1355. https://doi.org/10.1016/j.engstruct.2016.09.003.   DOI
7 Han, T.H., Stallings, J.M. and Kang, Y.J. (2010), "Nonlinear concrete model for double-skinned composite tubular columns", Constr. Build. Mater., 24, 2542-2553. https://doi.org/10.1016/j.conbuildmat.2010.06.001.   DOI
8 Jordao, S., Simoes da Silva, L. and Simoes, R. (2014), "Design formulation analysis for high strength steel welded beam-to-column joints", Eng. Struct., 70, 63-81. https://doi.org/10.1016/j.engstruct.2014.02.028.   DOI
9 Hassan, M.M, Ramadan, H.M., Naeem, M. and Mourad, S.A. (2014), "Behavior of gusset plate-T0-CCFT connections with different configurations", Steel Compos. Struct., 17(5), 735-751. https://doi.org/10.12989/scs.2014.17.5.735.   DOI
10 Hassan, M.M., Mahmoud, A.A. and Serror, M.H. (2016), "Behavior of concrete-filled double skin steel tube beam-columns", Steel Compos. Struct., 22(5), 1141-1162. https://doi.org/10.12989/scs.2016.22.5.1141.   DOI
11 Kong, Z., Hong. S., Vu, Q.V., Cao, X., Kim, S.E. and Yu, B. (2020), "New equations for predicting initial stiffness and ultimate moment of flush end-plate connections", J. Constr. Steel Res., 175(2020), 106336. https://doi.org/10.1016/j.jcsr.2020.106336.   DOI
12 Jo, E.J., Vu, Q.V. and Kim, S.E. (2020), "Effect of residual stress and geometric imperfection on the strength of steel box girders", Steel Compos. Struct., 34(3), 423-440. https://doi.org/10.12989/scs.2020.34.3.423.   DOI
13 Kim, S.E. and Nguyen, H.T. (2010), "Finite element modeling and analysis of a hybrid steel-PSC beam connection", Eng. Struct., 32, 2557-2569. https://doi.org/10.1016/j.engstruct.2010.04.029.   DOI
14 Kim, S.E. and Nguyen, H.T. (2012), "Evaluation of the connection efficiency of hybrid steel-concrete girder using finite element approach", Int. J. Mech. Sci., 61, 8-23. https://doi.org/10.1016/j.ijmecsci.2012.04.008.   DOI
15 Korean Standard KS F 2405 (2010), Korean Standards Association, Korea.
16 Korean Structural Concrete Design Code (2012), Korean Concrete Institute, Korea.
17 Korean Standard KS D 3515:2014 (2014), Korean Standards Association, Seoul, Korea.
18 Korean Buidling Code (2016), Architectural Institute of Korea, Korea.
19 Loh, H.Y., Uy, B. and Bradford, M.A. (2006), "The effects of partial shear connection in composite flush end plate joints. Part I-Experimental study", J. Constr. Steel Res., 62, 378-390. https://doi.org/10.1016/j.jcsr.2005.07.012.   DOI
20 Li, D., Wang, J., Uy, B., Aslani, F. and Patel, V. (2018), "Analysis and design of demountable circular CFST column-base connections", Steel Compos. Struct., 28(5), 559-571. https://doi.org/10.12989/scs.2018.28.5.559.   DOI
21 Thai, H.T., Uy, B., Yamesri and Aslani, F. (2017), "Behaviour of bolted endplate composite joints to square and circular CFST columns", J. Constr. Steel Res., 131, 68-82. https://doi.org/10.1016/j.jcsr.2016.12.022.   DOI
22 Moon, J., Roeder, C.W., Lehman, D.E. and Lee, H.E. (2012), "Analytical modeling of bending of circular concrete-filled steel tubes", Eng. Struct., 42, 349-361. https://doi.org/10.1016/j.engstruct.2012.04.028.   DOI
23 Tao, Z. and Han, L.H. (2006), "Behaviour of concrete-filled double skin rectangular steel tubular beam-columns", J. Constr. Steel Res., 62, 631-646. https://doi.org/10.1016/j.jcsr.2005.11.008.   DOI
24 Thai, H.T. and Uy, B. (2015), "Finite element modelling of blind bolted composite joints", J. Constr. Steel Res., 112, 339-353. https://doi.org/10.1016/j.jcsr.2015.05.011.   DOI
25 Thomas, J. and Sandeep, T.N. (2018), "Experimental study on circular CFST short columns with intermittently welded stiffeners", Steel Compos. Struct., 29(5), 659-667. https://doi.org/10.12989/scs.2018.29.5.659.   DOI
26 Truong, V.H., Papazafeiropoulos, G., Pham, V.T. and Vu, Q.V. (2019), "Effect of multiple longitudinal stiffeners on ultimate strength of steel plate girders", Structures, 22, 366-382. https://doi.org/10.1016/j.istruc.2019.09.002.   DOI
27 Korean Design Standard (2017), Korean Industrial Standards, Seoul, Korea.
28 Vu, Q.V., Papazafeiropoulos, G., Graciano, C. and Kim S.E. (2019), "Optimum linear buckling analysis of longitudinally multi-stiffened steel plates subjected to combined bending and shear", Thin-Wall. Struct., 136, 235-245. https://doi.org/10.1016/j.tws.2018.12.008.   DOI
29 Tong, L., Huang, X., Zhou, F. and Chen, Y. (2016), "Experimental and numerical investigations on extremely-low-cycle fatigue fracture behavior of steel welded joints", J. Constr. Steel Res., 119, 98-112. https://doi.org/10.1016/j.jcsr.2015.12.015.   DOI
30 Vu, Q.V., Thai, D.K. and Kim, S.E. (2018), "Effect of intermediate diaphragms on the load-carrying capacity of steel-concrete composite box girder bridges", Thin-Wall. Struct., 122, 230-241. https://doi.org/10.1016/j.tws.2017.10.024.   DOI
31 Vu, Q.V., Truong, V.H., Papazafeiropoulos, G., Graciano, C. and Kim S.E. (2019), "Bend-buckling strength of steel plates with multiple longitudinal stiffeners", J. Constr. Steel Res., 158, 41-52. https://doi.org/10.1016/j.jcsr.2019.03.006.   DOI
32 Wang, J., Uy, B. and Li, D. (2018), "Analysis of demountable steel and composite frames with semi-rigid bolted joints", Steel Compos. Struct., 28(3), 363-380. https://doi.org/10.12989/scs.2018.28.3.363.   DOI
33 Wang, J.F., Han, L.H. and Uy, B. (2009), "Behaviour of flush end plate joints to concrete-filled steel tubular columns", Journal of Constructional Steel Research. 65 925-939. https://doi.org/10.1016/j.jcsr.2008.12.008   DOI
34 Yang, J., Sheehan, T., Dai, X.H. and Lam, D. (2015), "Experimental study of beam to concrete-filled elliptical steel tubular column connections", Thin-Wall. Struct., 95, 16-23. https://doi.org/10.1016/j.tws.2015.06.009.   DOI
35 Wang, J.F., Han, L.H. and Uy, B. (2009), "Hysteretic behaviour of flush end plate joints to concrete-filled steel tubular columns", Journal of Constructional Steel Research. 65 1644-1663. https://doi.org/10.1016/j.jcsr.2008.12.008   DOI
36 Waqas, R., Uy, B. and Thai, H.T. (2019), "Experimental and numerical behaviour of blind bolted flush endplate composite connections", J. Constr. Steel Res., 153, 179-195. https://doi.org/10.1016/j.jcsr.2018.10.012.   DOI
37 Yang, C.M. and Kim, Y.M. (2007), "Cyclic behavior of bolted and welded beam-to-column joints", Int. J. Mech. Sci., 49, 635-649. https://doi.org/10.1016/j.ijmecsci.2006.09.022.   DOI
38 Yuan, F., Chen, M. and Huang, H. (2019), "Square CFST columns under cylic load and acid rain attack: Experiments", Steel Compos. Struct., 30(2), 171-183. https://doi.org/10.12989/scs.2019.30.2.171.   DOI
39 Ye, Z., Jiang, S., Heidarpour, A., Li, Y. and Li, G. (2019), "Experimental study on cyclically-damaged steel-concrete composite joints subjected to fire", Steel Composi. Struct., 30(4), 351-364. https://doi.org/10.12989/scs.2019.30.4.351.   DOI
40 Ataei, A., Bradford, M.A. and Valipour, H.R. (2016), "Finite element analysis of HSS semi-rigid composite joints with precast concrete slabs and demountable bolted shear connectors", Finite Elem. Anal. Des., 122, 16-38. https://doi.org/10.1016/j.finel.2016.08.003.   DOI
41 Elremaily, A. and Azizinamini, A. (2001), "Experimental behavior of steel beam to CFT column connections", J. Constr. Steel Res., 57, 1099-1119. https://doi.org/10.1016/S0143-974X(01)00025-6.   DOI
42 Esfandyary, R., Razzaghi, M.S. and Eslami, A. (2015), "A parametric investigation on the hysteretic behaviour of CFT column to steel beam connections", Struct. Eng. Mech., 55(11), 205-228. https://doi.org/10.12989/sem.2015.55.1.205.   DOI
43 Eurocode 2: Design of concrete structures- Part 1-1 (2004), EUROPEAN COMMITIEE FOR STANDARDIZATION.