Browse > Article
http://dx.doi.org/10.12989/scs.2020.36.6.703

Strain rate effect of steel-concrete composite panel indented by a hemispherical rigid body  

Zhao, Weiyi (Department of Civil Engineering, Qingdao University of Technology)
Wang, Lin (Beihang School, Beihang University)
Yang, Guotao (Department of Civil Engineering, Qingdao University of Technology)
Wang, Ziguo (Department of Civil Engineering, Qingdao University of Technology)
Gao, Zepeng (Department of Civil Engineering, Qingdao University of Technology)
Guo, Quanquan (School of Transportation Science and Engineering, Beihang University)
Publication Information
Steel and Composite Structures / v.36, no.6, 2020 , pp. 703-710 More about this Journal
Abstract
This paper presents numerical and theoretical investigations on the strain rate in steel-concrete composite (SC) panels under low-velocity impact of a hemispherical rigid body. Finite element analyses were performed on five specimens with different loading rates. The impact energy was kept constant to eliminate its influence by simultaneously altering the velocity and mass of the projectile. Results show that the strain rate in most parts of the specimens was low and its influence on bearing capacity and energy dissipation was limited in an average sense of space and time. Therefore, the strain rate effect can be ignored for the analyses of global deformation. However, the strain rate effect should be considered in local contact problems. Equations of the local strain and strain rate were theoretically derived.
Keywords
steel-concrete composite panel; finite element analysis; low-velocity impact; strain rate; theoretical method;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Sadiq, M., Xiuyun, Z. and Rong, P. (2014), "Simulation analysis of impact tests of steel plate reinforced concrete and reinforced concrete slabs against aircraft impact and its validation with experimental results", Nucl. Eng. Des., 273, 653-667. https://doi.org/10.1016/j.nucengdes.2014.03.031.   DOI
2 Sohel, K.M.A. and Liew, J.Y.R. (2014), "Behavior of steel- concrete-steel sandwich slabs subject to impact load", J. Constr. Steel Res., 100, 163-175. https://doi.org/10.1016/j.jcsr.2014.04.018.   DOI
3 Varma, A.H., Malushte, S.R., Sener, K.C. and Lai, Z. (2014), "Steel-plate composite (SC) walls for safety related nuclear facilities: Design for in-plane forces and out-of-plane moments", Nucl. Eng. Des., 269, 240-249. https://doi.org/10.1016/j.nucengdes.2013.09.019.   DOI
4 Yan, J.B. and Liew, J.Y.R. (2016), "Design and behavior of steel- concrete-steel sandwich plates subject to concentrated loads", Compos. Struct., 150, 139-152. https://doi.org/10.1016/j.compstruct.2016.05.004.   DOI
5 Yu, T. and Chen, F. (1990), "Analysis of the large deflection dynamic plastic response of simply-supported circular plates by the "membrane factor method", Acta Mechanica Sinica. 6 (4), 333-342. https://doi.org/10.6052/0459-1879-1990-5-1995-984.   DOI
6 Zhao, W., Guo, Q., Dou, X., Zhou, Y. and Ye, Y. (2018), "Impact response of steel-concrete composite panels: Experiments and FE analyses", Steel Compos. Struct., 26(3), 255-263. https://doi.org/10.12989/scs.2018.26.3.255.   DOI
7 Banthia, N.P. (1987), "Impact resistance of concrete", Ph.D. Dissertation; University of British Columbia, Canada.
8 Abrate, S. (1998), Impact on Composite Structures, Cambridge University Press, USA.
9 ACI 349-01 (2006), Code Requirements for Nuclear Safety-Related Concrete Structures and Commentary, American Concrete Institute; Farmington Hills, MI, USA.
10 ANSI/AISC N690s1-15 (2015), Specification for Safety-Related Steel Structures for Nuclear Facilities, American Institute of Steel Construction; Chicago, Illinois, USA.
11 Bruhl, J.C., Varma, A.H. and Kim, J.M. (2015), "Static resistance function for steel-plate composite (SC) walls subject to impactive loading", Nucl. Eng. Des., 295, 843-859. https://doi.org/10.1016/j.nucengdes.2015.07.037.   DOI
12 Davies, G.A.O. and Olsson, R. (2004), "Impact on Composite Structures", Aeronautical J., 108, (1089), 541-563. https://doi.org/10.1017/S0001924000000385.   DOI
13 Fujikake, K., Li, B. and Soeun, S. (2009), "Impact response of reinforced concrete beam and its analytical evaluation", J. Struct. Eng., 135(8), 938-950. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000039.   DOI
14 Guo, Q. and Zhao, W.Y. (2019), "Design of steel-concrete composite walls subjected to low-velocity impact", J. Constr. Steel Res., 154, 190-196. https://doi.org/10.1016/j.jcsr.2018.12.001.   DOI
15 Jones, N. (1989), Structural Impact, Cambridge University Press, UK.
16 Hilo, S.J., Badaruzzaman, W.H.W., Osman, S.A., Al-Zand, A.W., Samir, M. and Hasan, Q.A. (2015), "A state-of-the-art review on double-skinned composite wall systems", Thin-Wall. Struct., 97, 74-100. https://doi.org/10.1016/j.tws.2015.09.007.   DOI
17 Hrynyk, T.D. and Vecchio, F.J. (2014), "Behavior of steel fiber-reinforced concrete slabs under impact load", ACI Struct. J., 111(5), 1213-1224. https://doi.org/10.14359/51686923.   DOI
18 Jiang, H. and Chorzepa, M.G. (2014), "Aircraft impact analysis of nuclear safety-related concrete structures: A review", Eng. Failure Anal., 46, 118-133. https://doi.org/10.1016/j.engfailanal.2014.08.008.   DOI
19 Micallef, K., Sagaseta, J., Ruiz, M.F. and Muttoni, A. (2014), "Assessing punching shear failure in reinforced concrete flat slabs subjected to localised impact loading", Int. J. Impact Eng., 71(6), 17-33. https://doi.org/10.1016/j.ijimpeng.2014.04.003.   DOI
20 Ozbolt, J. and Sharma, A. (2011), "Numerical simulation of reinforced concrete beams with different shear reinforcements under dynamic impact loads", Int. J. Impact Eng., 38(12), 940-950. https://doi.org/10.1016/j.ijimpeng.2011.08.003.   DOI
21 Remennikov, A.M. and Kong, S.Y. (2012), "Numerical simulation and validation of impact response of axially-restrained steel- concrete-steel sandwich panels", Compos. Struct., 94(12), 3546-3555. https://doi.org/10.1016/j.compstruct.2012.05.011.   DOI
22 Hallquist, J.O. (2010), LS-DYNA keyword user's manual, vol. 1, Version 971, Livermore Software Technology Corporation (LSTC)
23 Remennikov, A.M., Kong, S.Y. and Uy, B. (2013), "The response of axially restrained non-composite steel-concrete-steel sandwich panels due to large impact loading", Eng. Struct., 49, 806-818. http://dx.doi.org/10.1016/j.engstruct.2012.11.014.   DOI