1 |
Abas, F.M., Gilbert, R.I., Foster, S.J. and Bradford, M.A. (2013), "Strength and serviceability of continuous composite slabs with deep trapezoidal steel decking and steel fibre reinforced concrete", Eng. Struct., 49, 866-875. https://doi.org/10.1016/j.engstruct.2012.12.043.
DOI
|
2 |
Altoubat, S., Ousmane, H. and Barakat, S. (2015), "Effect of fibers and welded-wire reinforcements on the diaphragm behavior of composite deck slabs", Steel Compos. Struct., 19(1), 153-171. https://doi.org/10.12989/scs.2015.19.1.153.
DOI
|
3 |
Carmona, R.L., Branco, J.C. and Simoes, R. (2009), "Lajes mistas com chapa colaborante: Solucoes para melhorar o seu comportamento", In VII Congresso de Construcao Metalica e Mista (pp. II-593-II-604). Lisbon, Portugal: CMM - Associacao portuguesa de Construcao Metalica e Mista.
|
4 |
CEN. (2002), EN 1990: Eurocode - Basis of structural design. Bruxelas: European Commitee for Standardization.
|
5 |
CEN. (2004a), EN 1992-1-1. Eurocode 2: Design of concrete structures - Part 1-1-: General rules and rules for buildings. Brussels: European Commitee for Standardization.
|
6 |
CEN. (2004b), EN 1994-1-1: Eurocode 4: Design of Composite Steel and Concrete Structures - Part 1-1: General Rules and Rules for Buildings. Brussels: European Commitee for Standardization.
|
7 |
CEN. (2006), EN 1993-1-3: Eurocode 3 - Design of steel structures; Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting Eurocode. Brussels: European Commitee for Standardization.
|
8 |
Chen, S. (2003), "Load carrying capacity of composite slabs with various end constraints", J. Constr. Steel Res., 59(3), 385-403. https://doi.org/10.1016/S0143-974X(02)00034-2.
DOI
|
9 |
Chuan, D.L.Y., Abdullah, R. and Bakar, K.B. (2008), "Behaviour and load bearing capacity of composite slab enhanced with shear screws, 8(6), 501-549.
|
10 |
Ferrer, M., Marimon, F. and Casafont, M. (2018), "An experimental investigation of a new perfect bond technology for composite slabs", Constr. Build. Mater., 166, 618-633. https://doi.org/10.1016/j.conbuildmat.2018.01.104.
DOI
|
11 |
Ferrer, M., Marimon, F. and Crisinel, M. (2006), "Designing cold-formed steel sheets for composite slabs: An experimentally validated FEM approach to slip failure mechanics", Thin-Wall. Struct., 44(12), 1261-1271. https://doi.org/10.1016/j.tws.2007.01.010.
DOI
|
12 |
Fonseca, A., Marques, B. and Simoes, R. (2015), "Improvement of the behaviour of composite slabs : A new type of end anchorage", Steel Compos. Struct., 19(6), 1381-1402. https://doi.org/10.12989/scs.2015.19.6.1381.
DOI
|
13 |
ISO. (2009), ISO 6892-1. Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature. Switzerland.
|
14 |
Johnson, R.P. and Shepherd, A.J. (2013), "Resistance to longitudinal shear of composite slabs with longitudinal reinforcement", J. Constr. Steel Res., 82, 190-194. https://doi.org/10.1016/j.jcsr.2012.12.005.
DOI
|
15 |
Salonikios, T.N., Sextos, A.G. and Kappos, A.J. (2012), "Tests on composite slabs and evaluation of relevant eurocode 4 provisions", Steel Compos. Struct., 13(6), 571-586. https://doi.org/10.12989/scs.2012.13.6.571.
DOI
|
16 |
Jolly, C.K. and Lawson, R.M. (1992), "End anchorage in composite slabs: an increased loadcarrying capacity", Struct. Eng., 70(11), 202-205.
|
17 |
Porter, M.L. and Greimann, L.F. (1984), "Shear-bond Strength of Studded Steel Deck Slabs", Proceedings of the 7th International Specialty Conference on Cold-Formed Steel Structures. St. Louis, Estados Unidos da America.
|
18 |
Rana, M.M., Uy, B. and Mirza, O. (2015), "Experimental and numerical study of end anchorage in composite slabs", J. Constr. Steel Res., 115, 372-386.
DOI
|
19 |
Saravanan, M., Marimuthu, V., Prabha, P., Arul Jayachandran, S., and Datta, D. (2012), "Experimental investigations on composite slabs to evaluate longitudinal shear strength", Steel Compos. Struct., 13(5), 489-500. https://doi.org/10.12989/scs.2012.13.5.489.
DOI
|
20 |
Simoes da Silva, L., Rebelo, C., Nethercot, D., Marques, L., Simoes, R. and Real, P.M.M.V. (2009), "Statistical evaluation of the lateral - torsional buckling resistance of steel I-beams , Part 2 : Variability of steel properties", J. Constr. Steel Res., 65(4), 832-849. https://doi.org/10.1016/j.jcsr.2008.07.017.
DOI
|
21 |
Simoes da Silva, L., Tankova, T., Marques, L. and Rebelo, C. (2018), "Safety assessment of EUROCODE 3 stability design rules for the lateral- torsional buckling of prismatic beams", Adv. Steel Constr., 14(4), 668-693. https://doi.org/10.18057/IJASC.2018.14.9.
|
22 |
Yang, Y., Liu, R., Huo, X., Zhou, X. and Roeder, C.W. (2018), "Static experiment on mechanical behavior of innovative flat steel plate-concrete composite slabs", Int. J. Steel Struct., 18(2), 473-485. https://doi.org/10.1007/s13296-018-0012-3.
DOI
|