1 |
Patrick, M. (2000), "Experimental investigation and design of longitudinal shear reinforcement in composite edge beams", Progress Struct. Eng. Mater., 2(2), 196-217. https://doi.org/10.1002/1528-2716(200004/06)2:2<196::AID-PSE22>3.0.CO;2-2.
DOI
|
2 |
Qureshi, J. (2010), "Finite element modelling of steel-concrete composite structures", PhD Thesis, University of Leeds, Leeds, UK. Retrieved from http://etheses.whiterose.ac.uk/id/eprint/21112.
|
3 |
Qureshi, J., Lam, D. and Ye, J. (2011), "Effect of shear connector spacing and layout on the shear connector capacity in composite beams", J. Constr. Steel Res., 67(4), 706-719. https://doi.org/10.1016/j.jcsr.2010.11.009.
DOI
|
4 |
Rambo-Roddenberry, M.D. (2002), "Behavior and Strength of Welded Stud Shear Connectors", PhD Thesis, Virginia Polytechnic and State University, Blancksburg, Virginia, USA. Retrieved from https://vtechworks.lib.vt.edu/handle/10919/26989.
|
5 |
Shen, M.H. and Chung, K.F. (2017a), "Structural Behaviour of Stud Shear Connections with Solid and Composite Slabs Under Co-Existing Shear and Tension Forces", Structures, 9, 79-90. https://doi.org/10.1016/j.istruc.2016.09.011.
DOI
|
6 |
Smith, A.L. and Couchman, G.H. (2010), "Strength and ductility of headed stud shear connectors in profiled steel sheeting", J. Constr. Steel Res., 66(6), 748-754. https://doi.org/10.1016/j.jcsr.2010.01.005.
DOI
|
7 |
Stark, J. and Van Hove, B.W.E.M. (1991)., Statistical analysis of push-out tests on stud connectors in composite steel and concrete structures. TNO Building and Construction Research Report BI-91-163, Delft, The Netherlands.
|
8 |
Sun, Q., Nie, X., Denavit, M.D., Fan, J. and Liu, W. (2019), "Monotonic and cyclic behavior of headed steel stud anchors welded through profiled steel deck", J. Constr. Steel Res., 157, 121-131. https://doi.org/10.1016/j.jcsr.2019.01.022.
DOI
|
9 |
Shen, M.H. and Chung, K.F. (2017b), "Experimental investigation into stud shear connections under combined shear and tension forces", J. Constr. Steel Res., 133, 434-447. https://doi.org/10.1016/j.jcsr.2017.02.021.
DOI
|
10 |
ANSI/AISC 360-16. (2016), Specification for Structural Steel Buildings. American Institute of Steel Construction (AISC), Chicago, Illinois, USA.
|
11 |
Bonilla, J., Bezerra, L.M., Mirambell, E. and Massicotte, B. (2018), "Review of stud shear resistance prediction in steel-concrete composite beams", Steel Compos. Struct., 27(3), 355- 370. https://doi.org/10.12989/scs.2018.27.3.355.
DOI
|
12 |
Bradford, M.A., Filonov, A. and Hogan, T.J. (2006), "Push testing procedure for composite beams with deep trapezoidal slabs", Proceedings of the 11th, International Conference On Metal Structures; Progress In Steel, Composite And Aluminium Structures (ICMS-2006), Rzeszow, Poland.
|
13 |
BS EN 1992-1-1. (2004), Eurocode 2: Design of concrete structures, Part 1-1: General rules and rules for buildings, British Standards Institution, London, UK.
|
14 |
BS EN 1994-1-1. (2004), Eurocode 4: Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings, British Standards Institution, London, UK.
|
15 |
Ernst, S., Bridge, R.Q. and Wheeler, A. (2009), "Push-out tests and a new approach for the design of secondary composite beam shear connections", J. Constr. Steel Res., 65(1), 44-53. https://doi.org/10.1016/j.jcsr.2008.04.010.
DOI
|
16 |
BS EN ISO 6892-1. (2009), Metallic materials - Tensile testing. Part 1: Method of test at ambient temperature, British Standards Institution, London, UK.
|
17 |
David Collings. (2013), Steel-concrete Composite Bridges: Designing with Eurocodes. ICE Publishing, London, UK.
|
18 |
Easterling, W.S., Gibbings, D.R. and Murray, T.M. (1993), "Strength of shear studs in steel deck on composite beams and joists", Eng. J., 30(2), 44-54.
|
19 |
Ernst, S., Bridge, R.Q. and Wheeler, A. (2010), "Correlation of beam tests with pushout tests in steel-concrete composite beams", J. Struct. Eng., 136(2), 183-192. https://doi.org/10.1061/(ASCE)0733-9445(2010)136:2(183).
DOI
|
20 |
Hicks, S. (2007), "Strength and ductility of headed stud connectors welded in modern profiled steel sheeting", Structural Engineer, 85(10), 32-38.
|
21 |
Hicks, S. and Couchman, G. (2004), "The shear resistance and ductility requirements of headed studs used with profiled steel sheeting", Proceedings of the 5th International Conference on Composite Construction in Steel and Concrete, Kruger National Park, Berg-en-Dal, Mpumalanga, South Africa, July 18-23.
|
22 |
Hicks, S.J. and Smith, A.L. (2014), "Stud shear connectors in composite beams that support slabs with profiled steel sheeting", Structural Engineering International: Journal of the International Association for Bridge and Structural Engineering (IABSE), 24(2), 246-253. https://doi.org/10.2749/101686614X13830790993122.
DOI
|
23 |
Lloyd, R.M. and Wright, H.D. (1990), "Shear connection between composite slabs and steel beams", J. Constr. Steel Res., 15(4), 255-285. https://doi.org/10.1016/0143-974X(90)90050-Q.
DOI
|
24 |
Huo, J., Wang, H., Li, L. and Liu, Y. (2019), "Experimental study on impact behaviour of stud shear connectors in composite beams with profiled steel sheeting", J. Constr. Steel Res., 161, 436-449. https://doi.org/10.1016/j.jcsr.2018.04.029.
DOI
|
25 |
Johnson, R.P. and Yuan, H. (1998), "Models and design rules for stud shear connectors in troughs of profiled sheeting", Proceedings of the Institution of Civil Engineers - Structures and Buildings, 128(3), 252-263. https://doi.org/10.1680/istbu.1998.30459.
DOI
|
26 |
Kingspan. (2011), "Multideck Technical Handbook, Manufactures of Multideck Composite Metal Decking." North Yorkshire, United Kingdom, (Sep. 4, 2019).
|
27 |
Nellinger, S., Eggert, F., Kuhlmann, U., Odenbreit, C. and Obiala, R. (2018), "Short-span composite beam tests to evaluate stud resistances", Proceedings of the Institution of Civil Engineers: Structures and Buildings, 171(1). https://doi.org/10.1680/jstbu.16.00173.
|
28 |
Nellinger, S., Odenbreit, C. and Lawson, R.M. (2014), "Push-out tests with modern deck sheeting and realistic transverse loading", Proceedings of the 12th International Conference on Steel, Space and Composite Structures, Prague, Czech Republic, 28-30 May.
|
29 |
Nellinger, S., Odenbreit, C., Obiala, R. and Lawson, M. (2017), "Influence of transverse loading onto push-out tests with deep steel decking", J. Constr. Steel Res., 28, 335-353. https://doi.org/10.1016/j.jcsr.2016.08.021.
|