Browse > Article
http://dx.doi.org/10.12989/scs.2020.35.2.171

Burst capacity of pipe under corrosion defects and repaired with thermosetting liner  

Akram, Ali (Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS)
Mustaffa, Zahiraniza (Department of Civil and Environmental Engineering, Universiti Teknologi PETRONAS)
Albarody, Thar M. Badri (Department of Mechanical Engineering, Universiti Teknologi PETRONAS)
Publication Information
Steel and Composite Structures / v.35, no.2, 2020 , pp. 171-186 More about this Journal
Abstract
This paper aims at providing insights on the use of thermosetting liner for the repair of offshore pipelines exposed to corrosion and leakage. The work which covers both experimental and numerical approaches were aspired due to the high cost of repair for pipelines, limitations of thermoplastic material and limited study of reinforced thermosetting liner. The experiment involves a destruction test called the burst test, carried out on an API 5L X42 carbon steel pipe under four case studies, namely (i) intact pipe, (ii) pipe with corrosion defect, (iii) pipe with corrosion defect and repaired with thermosetting liner and (iv) pipe with leakage and repaired with thermosetting liner. The numerical simulation was developed to first validate the experimental results and later to optimize the design of the thermosetting liner in terms of the number of layers required to restore the original strength of the pipe. The burst test shows an improvement in 23% of the burst capacity for the pipe with corrosion defects, after being repaired with a three-layer thermosetting liner. The parametric studies conducted showed that with an addition of thermosetting layers, the burst capacity improves by an average of 1.85 MPa. In conclusions, the improvement in strength can be further increased with increasing thickness of the thermosetting liner. The thermosetting liner was also determined to fail first inside the host pipe.
Keywords
pipeline; corrosion; leakage; burst capacity; repair; thermosetting liner;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Duell, J., Wilson, J. and Kessler, M. (2008), "Analysis of a carbon composite overwrap pipeline repair system", Int. J. Press. Vessels Piping, 85(11), 782-788. https://doi.org/10.1016/j.ijpvp.2008.08.001.   DOI
2 Farhidzadeh, A., Dehghan-Niri, E., Zhong, Z., Salamone, S., Aref, A. and Filiatrault, A. (2014), "Post-earthquake evaluation of pipelines rehabilitated with cured in place lining technology using acoustic emission", Constr. Build. Mater., 54, 326-338. https://doi.org/10.1016/j.conbuildmat.2013.12.048.   DOI
3 Frost, S., Savidis, Y., Illson, T.F., Ashworth, R., Heath, S., Cambers, J. and Boot, J.C. (2000), COREL (Corrosion Resistant Liners) Joint Industry Project (JIP)", NACE International.
4 Hancox, N. (1991), "Elevated temperature polymer composites", Mater. Design, 12(6), 317-321.   DOI
5 Hopkins, P. (2005), "High design factor pipelines: integrity issues", 44.
6 Kaw, A. K. (1997), Mechanics of Composite Materials. Taylor & Francis.
7 Keykha, A.H. (2017), "CFRP strengthening of steel columns subjected to eccentric compression loading", Steel Compos. Struct., 23(1), 87-94. https://doi.org/10.12989/scs.2017.23.1.087.   DOI
8 Kim, W., Kim, Y., Kho, Y. and Choi, J. (2002), "Full scale burst test and finite element analysis on corroded gas pipeline", Proceedings of the 4th International Pipeline Conference, Parts A and B, 1501-1508.
9 Li, X., Bai, Y., Su, C. and Li, M. (2016), "Effect of interaction between corrosion defects on failure pressure of thin wall steel pipeline", Int. J. Press. Vessels Piping, 138, 8-18.   DOI
10 Mazurkiewicz, L., Tomaszewski, M., Malachowski, J., Sybilski, K., Chebakov, M., Witek, M. and Dmitrienko, R. (2017), "Experimental and numerical study of steel pipe with part-wall defect reinforced with fibre glass sleeve", Int. J. Press. Vessels Piping, 149, 108-119. https://doi.org/10.1016/j.ijpvp.2016.12.008.   DOI
11 Mehdi, M.S. and Al-dossary, A.K. (2013), "Thermoplastic lined pipework for corrosive applications", Corros, (2197), 1-7.
12 Mohammadi, K. (2011), "Repair methods for damaged pipeline beyond diving depth" University of Stavanger.
13 Muren, J. (2007), "Flexible pipes failure modes, inspection, testing and monitoring", PSA - Norway, 30.
14 Netto, T., Ferraz, U. and Estefen, S. (2005), "The effect of corrosion defects on the burst pressure of pipelines", J. Constr. Steel Res., 61(8), 1185-1204. https://doi.org/10.1016/j.jcsr.2005.02.010.   DOI
15 Nienartowicz, B. (2012), "Rehabilitation of sewer channels, Investigations of load capacity of channels renovated with GRP liners", in Underground infrastructure of urban areas 2 (pp. 185-194). Boca Raton, FL: CRC Press.
16 Nienartowicz, B. (2015), "Analysis of selected aspects of the operations of pipelines renewed with the relining method on the basis of laboratory testing results", in Underground infrastructure of urban areas 3. (Eds., Boca Raton: C. Madryas, B. Przbyla, and A. Szot), CRC Press.
17 Obrien, P., Meldrum, E., Overton, C., Picksley, J., Anderson, K., and MacLeod, I. (2011), "Outcomes from the SureFlex joint industry project - an international initiative on flexible pipe integrity assurance", Offshore Technology Conference.
18 Setvati, M.R. and Mustaffa, Z. (2018), "Rehabilitation of notched circular hollow sectional steel beam using CFRP Patch", Steel Compos. Struct., 26(2), 151-161. https://doi.org/10.12989/scs.2018.26.2.151.   DOI
19 Palmer, A.C. and King, R.A. (2004), Subsea Pipeline Engineering.
20 Popineau, D., Wiet, P. and Boulet d'Aurias, S. (2012), "Subsea pipeline repair by composite system", Society of Petroleum Engineers.
21 Walters, R.A. (2015), "$IFL^{TM}$ - A novel approach to the rehabilitation of sub-sea hydrocarbon pipelines using high performance solef PVDF flexible kevlar reinforced liners", Society of Petroleum Engineers (SPE).
22 Silva, R., Guerreiro, J. and Loula, A. (2007), "A study of pipe interacting corrosion defects using the FEM and neural networks", Adv. Eng. Softw., 38(11-12), 868-875. https://doi.org/10.1016/j.advengsoft.2006.08.047.   DOI
23 Simonsen, A., Janssen, E. and Paton, C. (2012), "Inspection and monitoring techniques for un-bonded risers and pipelines", University of Stavanger.
24 Sulaiman, N.S. and Tan, H. (2014), "Third party damages of offshore pipeline 海底管道的第三方损伤", J. Energy Challenges Mech, 1(1), 1-6.
25 Wang, E., Nelson, T. and Rauch, R. (2004), "Back to Elements - Tetrahedra vs. Hexahedra", CAD-FEM GmbH, Munich, Ger, 16.
26 Yang, Y., et al. (2017), "Study of the design and mechanical performance of a GFRP-concrete composite deck" Steel Compos. Struct., 24(6), 679-688. https://doi.org/10.12989/scs.2017.24.6.679.   DOI
27 4 Subsea. (2013), "Un-bonded flexible risers - Recent field experience and actions for increased robustness", for PSA - Norway, Stavange.
28 Abdalla Filho, J., Machado, R., Bertin, R. and Valentini, M. (2010), "Evaluation of residual strength of pipelines containing corrosion defects", Proceedings of the 10th International Conference on Computational Structures Technology.
29 Wright, J.R., Karim, K.A. and Kennedy, S. (2014), "A case study detailing the design, planning, installation and cost and environmental benefit analysis of a reinforced thermoplastic pipe pulled through the inside of an existing offshore steel flow line in the East Malaysia Samarang Field", Offshore Technology Conference-Asia.
30 Xu, L. and Cheng, Y. (2012), "Reliability and failure pressure prediction of various grades of pipeline steel in the presence of corrosion defects and pre-strain", Int. J. Press. Vessels Piping, 89, 75-84. https://doi.org/10.1016/j.ijpvp.2011.09.008.   DOI
31 Barsoum, I., Dymock, J., Walters, R. and Seibi, A. (2016), "Finite element analysis of the installation process of a corrosion protective kevlar reinforced liner", Abu Dhabi International Petroleum Exhibition & Conference.
32 Abdalla Filho, J., Machado, R., Bertin, R. and Valentini, M. (2014), "On the failure pressure of pipelines containing wall reduction and isolated pit corrosion defects", Comput. Struct., 132, 22-33. https://doi.org/10.1016/j.compstruc.2013.10.017.   DOI
33 Abel, T. (2015), "Laboratory tests of pipelines reinforced with close-fit Trolining liner", Archiv. Civil Mech. Eng., 15(2), 427-435. https://doi.org/10.1016/j.acme.2014.11.002.   DOI
34 Abel, T. (2015), "Changes in strength parameters of pipelines rehabilitated with close-fit trolining liners - Numerical analysis based on laboratory tests", Archiv. Civil Mech. Eng., 16(1), 30-40. https://doi.org/10.1016/j.acme.2015.09.002.   DOI
35 Al-Owaisi, S., Becker, A. and Sun, W. (2016), "Analysis of shape and location effects of closely spaced metal loss defects in pressurised pipes", Eng. Fail. Anal., 68, 172-186. https://doi.org/10.1016/j.engfailanal.2016.04.032.   DOI
36 Anderson, T. D., Kulkarni, M.G. and Macia, M. L. (2012), "Reinforced liners for long-distance pipeline rehabilitation", Proceedings of the 22nd International Offshore and Polar Engineering Conference (ISOPE), 4, 395-400.
37 Bedairi, B., Cronin, D., Hosseini, A and Plumtree, A. (2012), "Failure prediction for crack-in-corrosion defects in natural gas transmission pipelines", Int. J. Pressure Vessels Piping, 96-97, 90-99. https://doi.org/10.1016/j.ijpvp.2012.06.002.   DOI
38 Belachew, C.T., Ismail, M.C. and Karuppanan, S. (2011), "Burst strength analysis of corroded pipelines by finite element method", J. Appl. Sci., 11(10), 1845-1850. DOI: 10.3923/jas.2011.1845.1850.   DOI
39 Carpenter, C. (2016), "Mechanical characterization and corrosion effects on glass reinforced vinyl ester liners used for oil and gas production", Society of Petroleum Engineers (SPE) Annual Technical Conference and Exhibition.
40 Belachew, C.T., Mokhtar, C.I. and Karuppanan, S. (2016), "Strength assessment of a corroded pipeline through the burst test: case study", J. Pipeline Syst. Eng. Practice, 7(3), 3-8. https://doi.org/10.1061/(ASCE)PS.1949-1204.0000232.
41 Chen, M. and Das, S. (2009), "Experimental Study on repair of corroded steel beam using CFRP." Steel Compos. Struct., 9(2), 103-118. https://doi.org/10.12989/scs.2009.9.2.103.   DOI
42 Chen, Y., Zhang, H., Zhang, J., Liu, X., Li, X. and Zhou, J. (2015), "Failure assessment of X80 pipeline with interacting corrosion defects", Eng. Fail. Anal., 47, 67-76. https://doi.org/10.1016/j.engfailanal.2014.09.013.   DOI
43 Choi, J., Goo, B., Kim, J., Kim, Y. and Kim, W. (2003), "Development of limit load solutions for corroded gas pipelines", Int. J. Press. Vessels Piping, 80(2), 121-128. https://doi.org/10.1016/S0308-0161(03)00005-X.   DOI
44 Chouchaoui, B. and Pick, R. (1996), "Behaviour of longitudinally aligned corrosion pits". Int. J. Press. Vessels Piping, 67(1), 17-35. https://doi.org/10.1016/0308-0161(94)00057-3.   DOI
45 Cronin, D.S. (2000), "Assessment of corrosion defects in pipelines", PhD thesis, University of Waterloo.
46 De Andrade, E.Q., Benjamin, A.C., Machado, P.R., Pereira, L.C., Jacob, B.P., Carneiro, E.G. and Noronha, D.B. (2006), "Finite element modeling of the failure behavior of pipelines containing interacting corrosion defects", Proceedings of the 25th International Conference on Offshore Mechanics and Arctic Engineering (OMAE).
47 Do, A.T., Bernard, G. and Hanonge, D. (2013), "Carbon fiber armors applied to presalt flexible pipe developments", Offshore Technology Conference, 6-9.