Browse > Article
http://dx.doi.org/10.12989/scs.2020.34.6.795

Axisymmetric bending of a circular plate with symmetrically varying mechanical properties under a concentrated force  

Magnucki, Krzysztof (Lukasiewicz Research Network - Institute of Rail Vehicles TABOR)
Stawecki, Wlodzimierz (Lukasiewicz Research Network - Institute of Rail Vehicles TABOR)
Lewinski, Jerzy (Lukasiewicz Research Network - Institute of Rail Vehicles TABOR)
Publication Information
Steel and Composite Structures / v.34, no.6, 2020 , pp. 795-802 More about this Journal
Abstract
The subject of the paper is a circular plate with symmetrically thickness-wise varying mechanical properties. The plate is simply supported and carries a concentrated force located in its centre. The axisymmetric bending problem of the plate with consideration of the shear effect is analytically and numerically studied. A nonlinear function of deformation of the straight line normal to the plate neutral surface is assumed. Two differential equations of equilibrium based on the principle of stationary potential energy are obtained. The system of equations is analytically solved and the maximum deflections and shear coefficients for example plates are derived. Moreover, the maximum deflections of the plates are calculated numerically (FEM), for comparison with the analytical results.
Keywords
circular plate; bending; functionally graded materials; shear effect; nonlinear theory;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Beni, N.N and Dehkordi, M.B. (2018), "An extension of Carrera unified formulation in polar coordinate for analysis of circular sandwich plate with FGM core using GDQ method", Comp. Struct. 185, 41-434. https://doi.org/10.1016/j.compstruct.2017.11.044.
2 Debowski D., Magnucki K. and Malinowski M. (2010), „Dynamic stability of a metal foam rectangular plate", Steel Compos. Struct., 10(2), 151-168. https://doi.org/10.12989/scs.2010.10.2.151.   DOI
3 Ferreira, A.J.M., Roque, C.M.C. and Martins, P.A.L.S. (2003), "Analysis of composite plates using higher-order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method", Comp. Part B Eng., 34(7), 627-636. https://doi.org/10.1016/S1359-8368(03)00083-0.   DOI
4 Feyzi, M.R. and Khorshidvand, A.R. (2017), "Axisymmetric postbuckling behavior of saturated porous circular plates", Thin-Walled Struct., 112, 149-158. https://doi.org/10.1016/j.tws.2016.11.026.   DOI
5 Gunes, R. and Aydin, M. (2010), "Elastic response of functionally graded circular plates under a drop-weight", Compos. Struct., 92(10), 2445-2456. https://doi.org/10.1016/j.compstruct.2010.02.015.   DOI
6 Jabbari, M., Mojahedin, A., Khorshidvand, A.R. and Eslami, M.R. (2014), "Buckling analysis of a functionally graded thin circular plate made of saturated porous materials", J. Eng. Mech. -ASCE, 140(2), 287-295. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000663.   DOI
7 Jha, D.K., Kant, T. and Singh, R.K. (2013), "A critical review of recent research on functionally graded plates", Compos. Struct., 96, 833-849. https://doi.org/10.1016/j.compstruct.2012.09.001.   DOI
8 Krivoshapko, S.N. (2007), "Research on general and axisymmetric ellipsoidal shells used as domes, Pressure vessels and tanks", Appl. Mech. Rev., 60(6), 336-355. https://doi.org/10.1115/1.2806278.   DOI
9 Magnucka-Blandzi, E., Wisniewska-Mleczko, K. and Smyczynski, M.J. (2018), "Buckling of symmetrical circular sandwich plates with variable mechanical properties of the core in the radial direction", Compos. Struct. 204, 88-94. https://doi.org/10.1016/j.compstruct.2018.07.020.   DOI
10 Magnucka-Blandzi, E. (2008), "Axi-symmetrical deflection and buckling of circular porous-cellular plate", Thin-Wall. Struct. 46(3), 333-337. https://doi.org/10.1016/j.tws.2007.06.006.   DOI
11 Magnucki, K. (2018), "Elastic buckling of a cylindrical panel with symmetrically varying mechanical properties - analytical study", Compos. Struct., 204, 217-222. https://doi.org/10.1016/j.compstruct.2018.07.073.   DOI
12 Magnucki, K. and Lewinski, J. (2019), "Bending of beams with symmetrically varying mechanical properties under generalized load - shear effect", Eng. Trans., 67(3), 441-457. https://doi.10.24423/EngTrans.987.20190509.
13 Magnucki, K., Szyc, W. and Lewinski, J. (2002), "Minimization of stress concentration factor in cylindrical pressure vessels with ellipsoidal heads", Int. J. Press. Vessel Pip., 79(12), 841-846. https://doi.org/10.1016/S0308-0161(02)00101-1.   DOI
14 Reddy, J.N. (2010), "Nonlocal nonlinear formulations for bending of classical and shear deformation theories of beams and plates", Int. J. Eng. Sci., 48(11), 1507-1518. https://doi.org/10.1016/j.ijengsci.2010.09.020.   DOI
15 Magnucki, K., Witkowski, D. and Magnucka-Blandzi, E. (2019), "Buckling and free vibrations of rectangular plates with symmetrically varying mechanical properties - Analytical and FEM studies", Compos. Struct., 220, 355-361. https://doi.org/10.1016/j.compstruct.2019.03.082.   DOI
16 Maturi, D.A., Ferreira, A.J.M., Zenkour, A.M. and Mashat, D.S. (2014), "Analysis of sandwich plates with a new layerwise formulation", Compos. Part B Eng., 56, 484-489. https://doi.org/10.1016/j.compositesb.2013.08.086.   DOI
17 Mojahedin, A., Jabbari, M., Khorshidvand, A.R. and Eslami, M.R. (2016), "Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher order shear deformation theory", Thin-Wall. Struct., 99, 83-90. https://doi.org/10.1016/j.tws.2015.11.008.   DOI
18 Reddy, J.N. and Berry, J. (2012), "Nonlinear theories of axisymmetric bending of functionally graded circular plates with modified couple stress", Compos. Struct., 94(12), 3664-3668. https://doi.org/10.1016/j.compstruct.2012.04.019.   DOI
19 Sahraee, S. and Saidi, A.R. (2009), "Axisymmetric bending analysis of thick functionally graded circular plates using fourth-order shear deformation theory", Europ. J. Mech. -A/Solids, 28(5), 974-984. https://doi.org/10.1016/j.euromechsol.2009.03.009.   DOI
20 Saidi, A.R., Rasouli, A. and Sahraee, S. (2009), "Axisymmetric bending and buckling analysis of thick functionally graded circular plates using unconstrained third-order shear deformation plate theory", Compos. Struct., 89(1), 110-119. https://doi.org/10.1016/j.compstruct.2008.07.003.   DOI
21 Yun, W., Rongqiao, X. and Haojiang, D. (2010), "Threedimensional solution of axisymmetric bending of functionally graded circular plates", Compos. Struct., 92(7), 1683-1693. https://doi.org/10.1016/j.compstruct.2009.12.002.   DOI
22 Shen, H.S. (2009), Functionally Graded Materials nonlinear analysis of plates and shells, CRC Press, Boca Raton, London, New York, USA.
23 Timoshenko, S. and Woinowsky-Krieger, S. (1959), Theory of plates and shells, (Second Edition), McGraw-Hill Book Company, Inc., New York, Toronto, London.
24 Ventsel, E. and Krauthammer, T. (2001), Thin plates and shells. Theory, analysis, and applications, Marcel Dekker Inc., New York, Basel, USA.
25 Wu, C.-P. and Liu, Y.-C. (2016), "A state space meshless method for the 3D analysis of FGM axisymmetric circular plates", Steel Comp. Struct., 22(1), 161-182. https://doi.org/10.12989/scs.2016.22.1.161.   DOI
26 Wu, C.P. and Yu, L.T. (2018), "Quasi-3D static analysis of twodirectional functionally graded circular plates", Steel Compos. Struct., 27(6), 89-801. https://doi.org/10.12989/scs.2018.27.6.789.
27 Zenkour, A.M. (2006), "Generalized shear deformation theory for bending analysis of functionally graded plates", Appl. Math. Model. 30(1), 67-84. https://doi.org/10.1016/j.apm.2005.03.009.   DOI
28 Zingoni, A. (2002), "Discontinuity effects at cone-cone axisymmetric shell junctions", Thin-Wall. Struct., 40(10), 877-891. https://doi.org/10.1016/S0263-8231(02)00022-8.   DOI
29 Zingoni, A. (2002), "Parametric stress distribution in shell-ofrevolution sludge digesters of parabolic ogival form", Thin-Wall. Struct., 40(7-8), 691-702. https://doi.org/10.1016/S0263-8231(02)00020-4.   DOI
30 Sowinski, K. and Magnucki, K. (2018), "Shaping of dished heads of the cylindrical pressure vessel for diminishing of the edge effect", Thin-Wall. Struct., 131, 746-754. https://doi.org/10.1016/j.tws.2018.07.018.   DOI
31 Zingoni, A., Enoma, N. and Govender, N. (2015), "Equatorial bending of an elliptic toroidal shell", Thin-Wall. Struct., 96, 286-294. https://doi.org/10.1016/j.tws.2015.08.017.   DOI
32 Zingoni, A., Mokhothu, B. and Enoma, N. (2015), "A theoretical formulation for the stress analysis of multi-segmented spherical shells for high-volume liquid containment", Eng. Struct., 87, 21-31. https://doi.org/10.1016/j.engstruct.2015.01.002.   DOI