1 |
Chhabra, D., Chandna, P. and Bhushan, G. (2011), "Design and analysis of smart structures for active vibration control using piezo-crystals", Int. J. Eng. Technol., 1(3), 153-163.
|
2 |
Daouadji, T.H., Benferhat, R. and Adim, B. (2016), "A novel higher order shear deformation theory based on the neutral surface concept of FGM plate under transverse load", Adv. Mater. Res., Int. J., 5(2), 107-120. https://doi.org/10.12989/amr.2016.5.2.107
|
3 |
Aglietti, G.S., Gabriel, S.B., Langley, R.S. and Rogers, E. (1997), "A modeling technique for active control design studies with application to spacecraft microvibrations", J. Acoust. Soc. Am., 102(4), 2158-2166. https://doi.org/10.1121/1.419631
DOI
|
4 |
Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (2000), "An efficient model of an equipment loaded panel for active control design studies", J. Acoust. Soc. Am., 108(4), 1663-1673. https://doi.org/10.1121/1.1287844
DOI
|
5 |
Daraji, A.H., Hale, J.M. and Ye, J. (2017), "New methodology for optimal placement of piezoelectric sensor/actuator pairs for active vibration control of flexible structures", J. Vib. Acoust., 140(1), 011015. https://doi.org/10.1115/1.4037510
DOI
|
6 |
Do, T.V., Bui, T.Q., Yu, T.T., Pham, D.T. and Nguyen, C.T. (2017), "Role of material combination and new results of mechanical behavior for FG sandwich plates in thermal environment", J. Computat. Sci., 21, 164-181. https://doi.org/10.1016/j.jocs.2017.06.015
DOI
|
7 |
Emdadi, M., Mohammadimehr, M. and Navi, B.R. (2019), "Free vibration of an annular sandwich plate with CNTRC facesheets and FG porous cores using Ritz method", Adv. Nano Res., Int. J., 7(2), 109-123. https://doi.org/10.12989/anr.2019.7.2.109
DOI
|
8 |
Fang, Y., Fei, J. and Hu, T. (2018), "Adaptive backstepping fuzzy sliding mode vibration control of flexible structure", J. Low Frequency Noise Vib. Active Control, 37(4), 1079-1096. https://doi.org/10.1016/j.jocs.2017.06.015
DOI
|
9 |
Mohammadimehr, M., Mohammadi-Dehabadi, A.A., Akhavan Alavi, S.M., Alambeigi, K., Bamdad, M., Yazdani, R. and Hanifehlou, S. (2018a), "Bending, buckling, and free vibration analyses of carbon nanotube reinforced composite beams and experimental tensile test to obtain the mechanical properties of nanocomposite", Steel Compos. Struct., Int. J., 29(3), 405-422. https://doi.org/10.12989/scs.2018.29.3.405
|
10 |
Mohammadimehr, M., Shahedi, S. and Rousta Navi, B. (2017c), "Nonlinear vibration analysis of FG-CNTRC sandwich Timoshenko beam based on modified couple stress theory subjected to longitudinal magnetic field using generalized differential quadrature method", Proceedings of the Institution of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 231(20), 3866-3885. https://doi.org/10.1177/0954406216653622
DOI
|
11 |
Mohammadimehr, M., Okhravi, S.V. and Akhavan Alavi, S.M. (2018b), "Free vibration analysis of magneto-electro-elastic cylindrical composite panel reinforced by various distributions of CNTs with considering open and closed circuits boundary conditions based on FSDT", J. Vib. Control, 24(8), 1551-1569. https://doi.org/10.1177/1077546316664022
DOI
|
12 |
Murray, R.M. (2006), Lecture 2 - LQR Control, California Institute of Technology Control and Dynamical Systems.
|
13 |
Nadirian, N., Biglari, H. and Hamed, M.A. (2017), "LQG vibration control of sandwich beams with transversely flexible core equipped with piezoelectric patches", J. Computat. Appl. Res. Mech. Eng. (JCARME), 7(1), 85-97. http://dx.doi.org/10.22061/JCARME.2017.643
|
14 |
Nasihatgozar, M., Khalili, S.M.R. and Fard, K.M. (2017), "General equations for free vibrations of thick doubly curved sandwich panels with compressible and incompressible core using higher order shear deformation theory", Steel Compos. Struct., Int. J., 24(2), 151-176. https://doi.org/10.12989/scs.2017.24.2.151
|
15 |
Kumar, R., Dey, T. and Panda, S.K. (2019), "Instability and vibration analyses of FG cylindrical panels under parabolic axial compressions", Steel Compos. Struct., Int. J., 31(2), 187-199. https://doi.org/10.12989/scs.2019.31.2.187
|
16 |
Yazdani, R., Mohammadimehr, M. and Navi, B.R. (2019), "Free vibration of Cooper-Naghdi micro saturated porous sandwich cylindrical shells with reinforced CNT face sheets under magneto-hydro-thermo-mechanical loadings", Struct. Eng. Mech., Int. J., 70(3), 351-365. https://doi.org/10.12989/sem.2019.70.3.351
|
17 |
Han, Y. and Elliott, J. (2007), "Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites", Computat. Mater. Sci., 39(2), 315-323. https://doi.org/10.1016/j.commatsci.2006.06.011
DOI
|
18 |
He, X., He, W., Chen, Y., Mu, X., Yu, Y. and Sun, C. (2018), "Boundary control of flexible aircraft wings for vibration suppression", Int. J. Control, 10, 1-10. https://doi.org/10.1080/00207179.2018.1442025
|
19 |
Kim, B.J. and Lee, D.G. (2008), "Characteristics of joining inserts for composite sandwich panels", Compos. Struct., 86(1), 55-60. https://doi.org/10.1016/j.compstruct.2008.03.020
DOI
|
20 |
Kumar, K.R. and Narayanan, S. (2008), "Active vibration control of beams with optimal placement of piezoelectric sensor/actuator pairs", Smart Mater. Struct., 17(5), 055008. https://doi.org/10.1088/0964-1726/17/5/055008
DOI
|
21 |
Lin, H. and Cao, D.Q. (2018), "A unified Gram-Schmidt-Ritz formulation for vibration and active flutter control analysis of honeycomb sandwich plate with general elastic support", J. Vibroeng., 20(5), 1982-2000. https://doi.org/10.1088/0964-1726/17/5/055008
DOI
|
22 |
Malekzadeh, M., Naghash, A. and Talebi, H.A. (2012), "Robust attitude and vibration control of a nonlinear flexible spacecraft", Asian J. Control, 14(2), 553-563. https://doi.org/10.1002/asjc.332
DOI
|
23 |
Marynowski, K. (2012), "Dynamic analysis of an axially moving sandwich beam with viscoelastic core", Compos. Struct., 94(9), 2931-2936. https://doi.org/10.1016/j.compstruct.2012.03.040
DOI
|
24 |
Mohammadimehr, M. and Mehrabi, M. (2017), "Stability and free vibration analyses of double-bonded micro composite sandwich cylindrical shells conveying fluid flow", Appl. Math. Model., 47, 685-709. https://doi.org/10.1016/j.apm.2017.03.054
DOI
|
25 |
Qiu, Z. and Ling, D. (2014), "Finite element modeling and robust vibration control of two-hinged plate using bonded piezoelectric sensors and actuators", Acta Mechanica Solida Sinica, 27(2), 146-161. https://doi.org/10.1016/S0894-9166(14)60025-2
DOI
|
26 |
Nguyen, K., Thai, H.T. and Vo, T. (2015), "A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates", Steel Compos. Struct., Int. J., 18(1), 91-120. http://dx.doi.org/10.12989/scs.2015.18.1.091
DOI
|
27 |
Nguyen, D.K. and Tran, T.T. (2018), "Free vibration of tapered BFGM beams using an efficient shear deformable finite element model", Steel Compos. Struct., Int. J., 29(3), 363-377. https://doi.org/10.12989/scs.2018.29.3.363
|
28 |
Niu, W., Zou, C., Li, B. and Wang, W. (2019), "Adaptive vibration suppression of time-varying structures with enhanced FxLMS algorithm", Mech. Syst. Signal Process., 118, 93-107. https://doi.org/10.1016/j.ymssp.2018.08.009
DOI
|
29 |
Rajabi, J. and Mohammadimehr, M. (2019), "Bending analysis of a micro sandwich skew plate using extended Kantorovich method based on Eshelby-Mori-Tanaka approach", Comput. Concrete, Int. J., 23(5), 361-376. https://doi.org/10.12989/cac.2019.23.5.361
|
30 |
Rashad, M., Wahab, Mostafa M.A. and Yang, T.Y. (2019), "Experimental and numerical investigation of RC sandwich panels with helical springs under free air blast loads", Steel Compos. Struct., Int. J., 30(3), 217-230. https://doi.org/10.12989/scs.2019.30.3.217
|
31 |
Selim, B.A., Zhang, L.W. and Liew, K.M. (2017), "Active vibration control of CNT-reinforced composite plates with piezoelectric layers based on Reddy's higher-order shear deformation theory", Compos. Struct., 163, 350-364. https://doi.org/10.1016/j.compstruct.2016.11.011
DOI
|
32 |
Arani, A.G., Hashemian, M., Loghman, A. and Mohammadimehr, M. (2011), "Study of dynamic stability of the double-walled carbon nanotube under axial loading embedded in an elastic medium by the energy method", J. Appl. Mech. Tech. Phys., 52(5), 815-824. https://doi.org/10.1134/S0021894411050178
DOI
|
33 |
Sharma, S., Vig, R. and Kumar, N. (2015), "Active vibration control: considering effect of electric field on PZT patches", Smart Struct. Syst., Int. J., 16(6), 1091-1105. https://doi.org/10.12989/sss.2015.16.6.1091
DOI
|
34 |
Zenkour, A.M. and Aljadani, M.H. (2018), "Mechanical buckling of functionally graded plates using a refined higher-order shear and normal deformation plate theory", Adv. Aircraft Spacecr. Sci., Int. J., 5(6), 615-632. https://doi.org/10.12989/aas.2018.5.6.615
|
35 |
Aglietti, G.S., Stoustrup, J., Langley, R.S., Rogers, E. and Gabriel, S.B. (2002), "Modelling and feedback control of microvibrations", In: The Institution of Electrical Engineers, pp. 241-274.
|
36 |
Aglietti, G.S., Langley, R.S., Rogers, E. and Gabriel, S.B. (2004), "Model building and verification for active control of microvibrations with probabilistic assessment of the effects of uncertainties", Proceedings of the Institution of Mechanical Engineers, Part C: J. Mech. Eng. Sci., 218(4), 389-399. https://doi.org/10.1177/095440620421800404
DOI
|
37 |
Arani, A.G. and Kiani, F. (2018), "Nonlinear free and forced vibration analysis of microbeams resting on the nonlinear orthotropic visco-Pasternak foundation with different boundary conditions", Steel Compos. Struct., Int. J., 28(2), 149-165. https://doi.org/10.12989/scs.2018.28.2.149
|
38 |
Aydin, M.R. and Gundogdu, O. (2018), "Vibration analysis of honeycomb sandwich composites filled with polyurethane foam by Taguchi Method", Steel Compos. Struct., Int. J., 28(4), 461-470. https://doi.org/10.12989/scs.2018.28.4.461
|
39 |
Bui, T.Q., Khosravifard, A., Zhang, C., Hematiyan, M.R. and Golub, M.V. (2013), "Dynamic analysis of sandwich beams with functionally graded core using a truly meshfree radial point interpolation method", Eng. Struct., 47, 90-104. https://doi.org/10.1016/j.engstruct.2012.03.041
DOI
|
40 |
Mohammadimehr, M. and Rahmati, A.H. (2013), "Small scale effect on electro-thermo-mechanical vibration analysis of single-walled boron nitride nanorods under electric excitation", Turkish J. Eng. Environ. Sci., 37(1), 1-15.
|
41 |
Mohammadimehr, M. and Shahedi, S. (2017), "High-order buckling and free vibration analysis of two types sandwich beam including AL or PVC-foam flexible core and CNTs reinforced nanocomposite face sheets using GDQM", Compos. Part B: Eng., 108, 91-107. https://doi.org/10.1016/j.compositesb.2016.09.040
DOI
|
42 |
Xu, Y., Li, Z. and Guo, K. (2018b), "Active vibration robust control for FGM beams with piezoelectric layers", Struct. Eng. Mech., Int. J., 67(1), 33-43. https://doi.org/10.12989/sem.2018.67.1.033
|
43 |
Shen, H.S. and Xiang, Y. (2012), "Nonlinear vibration of nanotube-reinforced composite cylindrical shells in thermal environments", Comput. Methods Appl. Mech. Eng., 213-216, 196-205. https://doi.org/10.1016/j.cma.2011.11.025
DOI
|
44 |
Tahouneh, V. (2017), "Vibration and mode shape analysis of sandwich panel with MWCNTs FG-reinforcement core", Steel Compos. Struct., Int. J., 25(3), 347-360. https://doi.org/10.12989/scs.2017.25.3.347
|
45 |
Xu, S., Cui, N., Fan, Y. and Guan, Y. (2018a), "Active vibration suppression of flexible spacecraft during attitude maneuver with actuator dynamics", IEEE Access, 6, 35327-35337. https://doi.org/10.1109/ACCESS.2018.2851665
DOI
|
46 |
Mohammadimehr, M., Monajemi, A.A. and Afshari, H. (2017b), "Free and forced vibration analysis of viscoelastic damped FGCNT reinforced micro composite beams", Microsyst. Technol., 1-15. https://doi.org/10.1007/s00542-017-3682-4
|
47 |
Mohammadimehr, M., Navi, B.R. and Arani, A.G. (2016a), "Dynamic stability of MSGT sinusoidal viscoelastic piezoelectric polymeric FG-SWNT reinforced nanocomposite plate considering surface stress and agglomeration effects under hydro-thermo-electro-magneto-mechanical loadings", Mech. Adv. Mater. Struct., 24(16), 1325-1342. http://dx.doi.org/10.1080/15376494.2016.1227507
DOI
|
48 |
Mohammadimehr, M., Rostami, R. and Arefi, M. (2016b), "Electro-elastic analysis of a sandwich thick plate considering FG core and composite piezoelectric layers on Pasternak foundation using TSDT", Steel Compos. Struct., Int. J., 20(3), 513-543. https://doi.org/10.12989/scs.2016.20.3.513
DOI
|
49 |
Mohammadimehr, M., Zarei, H.B., Parakandeh, A. and Arani, A.G. (2017a), "Vibration analysis of double-bonded sandwich microplates with nanocomposite facesheets reinforced by symmetric and un-symmetric distributions of nanotubes under multi physical fields", Struct. Eng. Mech., Int. J., 64(3), 361-379. https://doi.org/10.12989/sem.2017.64.3.361
|