Browse > Article
http://dx.doi.org/10.12989/scs.2019.30.5.457

Behavior of steel storage pallet racking connection - A review  

Chen, Chulin (School of Architecture and Art, Central South University)
Shi, Lei (School of Architecture and Art, Central South University)
Shariati, Mahdi (Faculty of Civil Engineering, University of Tabriz)
Toghroli, Ali (Department of Civil Engineering, South Tehran Branch, Islamic Azad University)
Mohamad, Edy Tonnizam (Centre of Tropical Geoengineering (GEOTROPIK), Faculty of Civil Engineering, Universiti Teknologi Malaysia)
Bui, Dieu Tien (Institute of Research and Development, Duy Tan University)
Khorami, Majid (Universidad UTE, Facultad de Arquitectura y Urbanismo, Calle Rumipamba s/n y Bourgeois)
Publication Information
Steel and Composite Structures / v.30, no.5, 2019 , pp. 457-469 More about this Journal
Abstract
Steel pallet racking industry has globally used from the industrial revolution and has deeply evolved from hot-rolled profile into cold-formed profile to raise the optimization in engineering field. Nowadays, some studies regarding cold-formed steel profile have been performed, but fewer studies in terms of cold-formed pallet racking specifically in connection due to the semi-rigid behavior by lug-hooked into the upright have been conducted. The objective of this study is to review the related literature on steel storage racking connection behavior.
Keywords
steel pallet racks; beam to column connection; cantilever testing; moment resistance; stiffness; ductility;
Citations & Related Records
Times Cited By KSCI : 15  (Citation Analysis)
연도 인용수 순위
1 Zhao, X., Dai, L., Wang, T., Sivakumaran, K.S. and Chen, Y. (2017), "A theoretical model for the rotational stiffness of storage rack beam-to-upright connections", J. Constr. Steel Res., 133, 269-281.   DOI
2 Zhao, J., Chen, Z., Mehrmashhadi, J. and Bobaru, F. (2018a), "Construction of a peridynamic model for transient advectiondiffusion problems", Int. J. Heat Mass Transfer, 126, 1253-1266.   DOI
3 Zhao, X., Dai, L. and Rasmussen, K.J. (2018b), "Hysteretic behaviour of steel storage rack beam-to-upright boltless connections", J. Constr. Steel Res., 144, 81-105.   DOI
4 Sharbatdar, M., Bazzaz, M., Esmaeili, H. and Bazzaz, M. (2008), "Influence of Transverse Loading on the Stability of Slender Unreinforced Masonry Walls", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran, 14, pp. 1-12.
5 Shariati, M., Tahir, M.M., Wee, T.C., Shah, S.N.R., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166.   DOI
6 Eslami, A., Mola-Abasi, H. and Shourijeh, P.T. (2014), "A polynomial model for predicting liquefaction potential from cone penetration test data", Scientia Iranica. Transact. A, Civil Eng., 21(1), 44.
7 Markazi, F.D., Beale, R.G. and Godley, M.H.R. (1997), "Experimental analysis of semi-rigid boltless connectors", Thin-Wall. Struct., 28(1), 57-87.   DOI
8 Faggiano, B., Marzo, A., Mazzolani, F.M. and Calado, L.M. (2009), "Analysis of rectangular-shaped collar connectors for composite timber-steel-concrete floors: Push-out tests", J. Civil Eng. Manag., 15(1), 47-58.   DOI
9 Sohel, K.M.A., Liew, J.R., Yan, J.B., Zhang, M.H. and Chia, K.S. (2012), "Behavior of steel-concrete-steel sandwich structures with lightweight cement composite and novel shear connectors", Compos. Struct., 94(12), 3500-3509.   DOI
10 Shifferaw, Y. (2012), Cold-formed steel beam-column applications in residential and commercial midrise buildings.
11 Talaiekhozani, A., Keyvanfar, A., Andalib, R., Samadi, M., Shafaghat, A., Kamyab, H., Majid, M.A., Zin, R.M., Fulazzaky, M.A., Lee, C.T. and Hussin, M.W. (2014), "Application of Proteus mirabilis and Proteus vulgaris mixture to design selfhealing concrete", Desalin. Water Treat., 52(19-21), 3623-3630.   DOI
12 Mola-Abasi, H., Eslami, A. and Shourijeh, P.T. (2013), "Shear wave velocity by polynomial neural networks and genetic algorithms based on geotechnical soil properties", Arab. J. Sci. Eng., 38(4), 829-838.   DOI
13 Shah, S.N.R., Sulong, N.R., Jumaat, M.Z. and Shariati, M. (2016a), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258.   DOI
14 Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014a), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809.   DOI
15 Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848.
16 Gerami, M., Bazzaz, M., Andalib, Z. and Bazzaz, M. (2008), "Retrofit of Reinforced Concrete Frame with Steel Bracing System", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran, 14, pp. 1-17.
17 Gholhaki, M., Bazzaz, M., Mousavian, M. and Shojaei, B. (2008), "Seismic Behavior of Eccentric Braced System", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran, 14, pp. 1-10.
18 Grecea, D., Stratan, A., Ciutina, A. and Dubina, D. (2004), "Rotation capacity of MR beam-to-column joints under cyclic loading", Connections in Steel Structures V, Amsterdam, 141-154.
19 Gusella, F., Orlando, M., Vignoli, A. and Thiele, K. (2018), "Flexural capacity of steel rack connections via the component method", The Open Constr. Build. Technol. J., 12(1).
20 Firouzianhaji, A., Saleh, A. and Samali, B. (2014), "Stability analysis of steel storage rack structures", Proceedings of the 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Byron Bay, Australia, December.
21 Freeman, T.J., Borowiec, J.D., Wilson, B., Arabali, P. and Sakhaeifar, M. (2016), Pavement maintenance guidelines for general aviation airport management.
22 Mohammadhassani, M., Jumaat, M.Z. and Jameel, M. (2012), "Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams", Constr. Build. Mater., 30, 265-273.   DOI
23 Cardoso, F.S. and Rasmussen, K.J. (2016), "Finite element (FE) modelling of storage rack frames", J. Constr. Steel Res., 126, 1-14.   DOI
24 Li, C., Zhang, Y., Tu, W., Jun, C., Liang, H. and Yu, H. (2017), "Soft measurement of wood defects based on LDA feature fusion and compressed sensor images", J. Forestry Res., 28(6), 1285-1292.   DOI
25 Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., Int. J., 60(3), 471-488.   DOI
26 McGuire, D.J. (1995), "Notes on Semi-Rigid Connections", Retrieved 01 March, 2015. URL: http://femci.gsfc.nasa.gov/semirigid/
27 Mehrmashhadi, J., Tang, Y., Zhao, X., Xu, Z., Pan, J.J., Van Le, Q. and Bobaru, F. (2018), "The Effect of Solder Joint Microstructure on the Drop Test Failure: a Peridynamic Analysis", IEEE Transact. Compon. Packag. Manuf. Technol.
28 Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868.   DOI
29 Arabali, P., Sakhaeifar, M., Freeman, T., Wilson, B. and Borowiec, J. (2016), "Decision-making tool for the selection of pavement preservation treatments in general aviation airport pavements", In: International Conference on Transportation and Development 2016.
30 Dai, L., Zhao, X. and Rasmussen, K.J. (2018), "Flexural behaviour of steel storage rack beam-to-upright bolted connections", Thin-Wall. Struct., 124, 202-217.   DOI
31 Ardalan, H., Eslami, A. and Nariman-Zadeh, N. (2009), "Piles shaft capacity from CPT and CPTu data by polynomial neural networks and genetic algorithms", Comput. Geotech., 36(4), 616-625.   DOI
32 Ahamed, H. and Mahendran, M. (2010), "Bolted beam-column moment connections between cold-formed steel members", Proceedings of the 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM 21), Victoria University, Melbourne, Australia.
33 Andalib, Z., Kafi, M.A., Bazzaz, M. and Momenzadeh, S. (2018), "Numerical evaluation of ductility and energy absorption of steel rings constructed from plates", Eng. Struct., 169, 94-106.   DOI
34 Bajoria, K. and Talikoti, R. (2006), "Determination of flexibility of beam-to-column connectors used in thin walled cold-formed steel pallet racking systems", Thin-Wall. Struct., 44(3), 372-380.   DOI
35 Baldassino, N., Bernuzzi, C., di Gioia, A. and Simoncelli, M. (2019), "An experimental investigation on solid and perforated steel storage racks uprights", J. Constr. Steel Res., 155, 409-425.   DOI
36 Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Steel Compos. Struct., Int. J., 17(5), 623-639.   DOI
37 El Kadi, B. and Kiymaz, G. (2015), "Behavior and design of perforated steel storage rack columns under axial compression", Steel Compos. Struct., Int. J., 18(5), 1259-1277.   DOI
38 El Kadi, B., Cosgun, C., Mangir, A. and Kiymaz, G. (2017), "Strength upgrading of steel storage rack frames in the downaisle direction", Steel Compos. Struct., Int. J., 23(2), 143-152.   DOI
39 Elias, G.C., de Almeida Neiva, L.H., Sarmanho, A.M.C., Alves, V.N. and e Castro, A.F.B. (2018), "Ultimate load of steel storage systems uprights", Eng. Struct., 170, 53-62.   DOI
40 Bao, Y., Tang, F., Chen, Y., Meng, W., Huang, Y. and Chen, G. (2016), "Concrete pavement monitoring with PPP-BOTDA distributed strain and crack sensors", Smart Struct. Syst., Int. J., 18(3), 405-423.   DOI
41 Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.A.M., Heydari, A., Wakil, K., Gebreel, S.A. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, Int. J., 21(5), 525-530.
42 Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., Int. J., 22(4), 433-440.
43 Trouncer, A.N. and Rasmussen, K.J.R. (2016), "Ultra-light gauge steel storage rack frames. Part 1: Experimental investigations", J. Constr. Steel Res., 124, 57-76.   DOI
44 Uma, S.R. and Beattie, G. (2011), "Observed performance of industrial pallet rack storage systems in the canterbury earthquakes", Bull. New Zealand Soc. Earthq. Eng., 44(4), 388-393.   DOI
45 Yin, L., Tang, G., Zhang, M., Wang, B. and Feng, B. (2016), "Monotonic and cyclic response of speed-lock connections with bolts in storage racks", Eng. Struct., 116, 40-55.   DOI
46 Shahabi, S., Sulong, N., Shariati, M. and Shah, S. (2016), "Performance of shear connectors at elevated temperatures - A review", Steel Compos. Struct., Int. J., 20(1), 185-203.   DOI
47 Haddad, A., Abbas, S. and Bazzaz, M. (2008), "Investigation of Seismic Behavior of Soil under Severe Grand Motion", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran, 14, pp. 1-6.
48 EN 1993-1-1 (2005), Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings.
49 Shah, S.N.R., Sulong, N.R., Shariati, M., Khan, R. and Jumaat, M.Z. (2016b), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin-Wall. Struct., 106, 471-483.   DOI
50 Shah, S.N.R., Sulong, N.R., Khan, R., Jumaat, M.Z. and Shariati, M. (2016c), "Behavior of industrial steel rack connections", Mech. Syst. Signal Process., 70-71, 725-740.   DOI
51 Haji Agha Mohammad Zarbaf, S.E., Norouzi, M., Allemang, R.J., Hunt, V.J. and Helmicki, A. (2017a), "Stay cable tension estimation of cable-stayed bridges using genetic algorithm and particle swarm optimization", J. Bridge Eng., 22(10), 05017008.   DOI
52 Haji Agha Mohammad Zarbaf, S.E., Norouzi, M., Allemang, R.J., Hunt, V.J., Helmicki, A. and Nims, D.K. (2017b), "Stay force estimation in cable-stayed bridges using stochastic subspace identification methods", J. Bridge Eng., 22(9), 04017055.   DOI
53 Bernuzzi, C. and Simoncelli, M. (2017), "Steel storage pallet racks in seismic zones: Advanced vs. standard design strategies", Thin-Wall. Struct., 116, 291-306.   DOI
54 Shahnazar, S., Bagheri, S., TermehYousefi, A., Mehrmashhadi, J., Karim, M.S.A. and Kadri, N.A. (2018), "Structure, mechanism, and performance evaluation of natural gas hydrate kinetic inhibitors", Rev. Inorganic Chem., 38(1), 1-19.   DOI
55 Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., Int. J., 26(4), 485-499.
56 Kanyilmaz, A., Castiglioni, C.A., Brambilla, G. and Chiarelli, G.P. (2016), "Experimental assessment of the seismic behavior of unbraced steel storage pallet racks", Thin-Wall. Struct., 108, 391-405.   DOI
57 Kheyroddin, A., Bazzaz, M., Navan, Y.S. and Bazzaz, M. (2008), "The complication and weakness of construction of steel structure", Proceedings of the 14th International Civil Engineering Student Conference, Semnan, Iran, 14, pp. 1-9.
58 Bazzaz, M., Darabi, M.K., Little, D.N. and Garg, N. (2018), "A straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures", In: Transportation Research Record. Transportation Research Board 96th Annual Meeting, 2672, pp. 481-492.
59 Bernuzzi, C. and Castiglioni, C.A. (2001), "Experimental analysis on the cyclic behaviour of beam-to-column joints in steel storage pallet racks", Thin-Wall. Struct., 39(10), 841-859.   DOI
60 Bernuzzi, C. and Simoncelli, M. (2016), "An advanced design procedure for the safe use of steel storage pallet racks in seismic zones", Thin-Wall. Struct., 109, 73-87.   DOI
61 Bertocci, L., Comparini, D., Lavacchini, G., Orlando, M., Salvatori, L. and Spinelli, P. (2017), "Experimental, numerical, and regulatory P-Mx-My domains for cold-formed perforated steel uprights of pallet-racks", Thin-Wall. Struct., 119, 151-165.   DOI
62 Yin, L., Tang, G., Li, Z. and Zhang, M. (2018), "Responses of cold-formed steel storage racks with spine bracings using speedlock connections with bolts I: Static elastic-plastic pushover analysis", Thin-Wall. Struct., 125, 51-62.   DOI
63 Sarangapani, G. and Ganguli, R. (2017), "Detection of local matrix cracks in composite beam using modal data and modular radial basis neural networks", ISSS J. Micro Smart Syst., 6(2), 127-140.   DOI
64 Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y., Wakil, K. and Khorami, M. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., Int. J., 28(4), 439-447.
65 Zhao, X., Wang, T., Chen, Y. and Sivakumaran, K.S. (2014), "Flexural behavior of steel storage rack beam-to-upright connections", J. Constr. Steel Res., 99, 161-175.   DOI
66 Lewis, D.R. (1991), Fail-safe storage rack for irradiated fuel rod assemblies; U.S. Patent, West Mifflin, PA, USA.
67 Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., Int. J., 27(5), 537-543.
68 Paknahad, M., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., Int. J., 28(4), 483-494.
69 Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424.
70 Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688.   DOI
71 Sedghi, Y., Zandi, Y., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340.
72 Shah, S.N.R., Sulong, N.R., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422.   DOI
73 Kumar, P.S.R.S.K.a.P.A.R.S. (2013), nptel.iitm.ac.in