Browse > Article
http://dx.doi.org/10.12989/scs.2019.30.5.433

An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections  

Xie, Qiang (School of Civil Engineering, Central South University)
Sinaei, Hamid (Department of Civil Engineering, Sirjan Branch, Islamic Azad University)
Shariati, Mahdi (Faculty of Civil Engineering, University of Tabriz)
Khorami, Majid (Universidad UTE, Facultad de Arquitectura y Urbanismo, Calle Rumipamba s/n y Bourgeois)
Mohamad, Edy Tonnizam (Centre of Tropical Geoengineering (GEOTROPIK), Faculty of Civil Engineering, Universiti Teknologi Malaysia)
Bui, Dieu Tien (Institute of Research and Development, Duy Tan University)
Publication Information
Steel and Composite Structures / v.30, no.5, 2019 , pp. 433-441 More about this Journal
Abstract
The aim of this research is reinforcing of concrete with variety of fiber reinforced polymer (FRP) configurations and investigates the load capacity and ductility of these connections using an experimental investigation. Six scaled-down RC exterior joints were tested under moderately monotonic loads. The results show that, the shape of the FRP had a different effect on the joint capacity and the connection ductility coefficient. The greatest effect on increasing the ductility factor was seen in the sample where two reinforcement plates were used on both sides of the beam web (RCS5 sample). For the sample with the presence of FRP plates at the top and bottom of the beam (RCS3 sample), the ductility factor was reduced even the load capacity of this sample increased. Except for the RCS3 sample, the rest of the samples exhibited an increase in the ductility factor due to the FRP reinforcement.
Keywords
CFRP plate; plastic hinge relocation; finite element; rehabilitation; strengthening;
Citations & Related Records
Times Cited By KSCI : 10  (Citation Analysis)
연도 인용수 순위
1 Hui, Y. and Irawan, P. (2001), "Behaviour of full-scale lightly reinforced concrete beam-column joints", Civil Engineering Research; Nanyang Technological University, Singapore, pp. 44-45.
2 Ismail, M., Shariati, M., Awal, A., Chiong, C., Chahnasir, E., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., Int. J., 28(6), 681-690.
3 Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.R. (2015), "Behavior of Tilted Angle Shear Connectors", PLoS one, 10(12), 1-11.
4 Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M.M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., Int. J., 23(1), 67-85.   DOI
5 Lee, H.-J. and Hwang, J.-S. (1999), "A study on the effect of fracture delay of intelligent FRP by transparent photoelastic experimental method", Transact. Kor. Soc. Mech. Eng. A, 23(11), 1904-1911.   DOI
6 McCormac, J.C. and Brown, R.H. (2015), Design of Reinforced Concrete, John Wiley & Sons.
7 Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848.
8 Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., Int. J., 27(5), 537-543.
9 Nordin, H. (2005), "Strengthening structures with externally prestressed tendons: literature review."
10 Sadeghipour, E.S., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424.
11 Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688.   DOI
12 Sedghi, Y., Zandi, Y., Toghroli, A., Safa, M., Mohamad, E.T., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340.
13 Shahabi, S.E.M., Ramli Sulong, N.H., Shariati, M., Mohammadhassani, M. and Shah, S.N.R. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., Int. J., 20(3), 651-669.   DOI
14 Shariati, A., Ramli Sulong, N.R., Suhatril, M. and Shariati, M. (2012a), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831.
15 Shahabi, S., Sulong, N., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., Int. J., 20(1), 185-203.   DOI
16 Shariati, M. (2013), "Behaviour of C-shaped Shear Connectors in Stell Concrete Composite Beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
17 Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad, K.M.M., Mehdi, M. and Shafigh, P. (2011), "Behavior of Channel Shear Connectors in Normal and Light Weight Aggregate Concrete (Experimental and Analytical Study)", Adv. Mater. Res., 168, 2303-2307.   DOI
18 Shariati, M., Ramli Sulong, N., Suhatril, M., Shariati, A., Arabnejad Khanouki, M. and Sinaei, H. (2012b), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the 5th International Conference on Engineering Failure Analysis, The Hague, The Netherlands, July.
19 Shariati, M., Ramli Sulong, N.R., Suhatril, M., Shariati, A., Khanouki, M.A. and Sinaei, H. (2012c), "Behaviour of Cshaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73.   DOI
20 Shariati, M., Shariati, A., Ramli Sulong, N.R., Suhatril, M. and Arabnejad, K.M.M. (2014), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134.   DOI
21 Shariati, M., Ramli Sulong, N.R., Shariati, A. and Arabnejad, K.M.M. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926.
22 Tang, W.C., Balendran, R.V., Nadeem, A. and Leung, H.Y., (2006), "Flexural strengthening of reinforced lightweight polystyrene aggregate concrete beams with near-surface mounted GFRP bars", Build. Environ., 41(10), 1381-1393.   DOI
23 Shariati, M., Ramli Sulong, N.R., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392.   DOI
24 Shariati, M., Toghroli, A., Jalali A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
25 Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.R. and Tahir, M.M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PloS one, 11(8), e0156989.   DOI
26 Thomas, P. and Priestley, M. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, New York Wiley-Interscience, USA.
27 Wang, M., Shi, X., Zhou, J. and Qiu, X. (2018), "Multi-planar detection optimization algorithm for the interval charging structure of large-diameter longhole blasting design based on rock fragmentation aspects", Eng. Optimiz., 50(12), 2177-2191.   DOI
28 Wang, M., Shi, X. and Zhou, J. (2019), "Optimal Charge Scheme Calculation for Multiring Blasting Using Modified Harries Mathematical Model", J. Perform. Constr. Facil., 33(2), 04019002.   DOI
29 Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., Int. J., 27(3), 389-399.
30 Ardalan, H., Eslami, A. and Nariman-Zadeh, N. (2009), "Piles shaft capacity from CPT and CPTu data by polynomial neural networks and genetic algorithms", Comput. Geotech., 36(4), 616-625.   DOI
31 Daly, A. and Witarnawan, W. (1997), "Strengthening of bridges using external post-tensioning", Paper PA3307/97, Transportation Research Laboratory, Berkshire, UK.
32 Zhou, J., Li, E., Wang, M., Chen, X., Shi, X. and Jiang, L. (2019), "Feasibility of Stochastic Gradient Boosting Approach for Evaluating Seismic Liquefaction Potential Based on SPT and CPT Case Histories", J. Perform. Constr. Facil., 33(3), 04019024.   DOI
33 Arabnejad, K.M.M., Ramli Sulong, N.R., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162.   DOI
34 Aslam, M., Shafigh, P., Jumaat, M.Z. and Shah, S.N.R. (2015), "Strengthening of RC beams using prestressed fiber reinforced polymers-A review", Constr. Build. Mater., 82, 235-256.   DOI
35 Bazzaz, M., Andalib, Z., Kheyroddin, A. and Kafi, M.A. (2015), "Numerical comparison of the seismic performance of steel rings in off-centre bracing system and diagonal bracing system", Steel Compos. Struct., Int. J., 19(4), 917-937.   DOI
36 Bezerra, L.M., Barbosa, W.C., Bonilla, J. and Cavalcante, O.R. (2018), "Truss-type shear connector for composite steelconcrete beams", Constr. Build. Mater., 167, 757-767.   DOI
37 Engindeniz, M., Kahn, L.F. and Abdul-Hamid, Z. (2005), "Repair and strengthening of reinforced concrete beam-column joints: State of the art", ACI Struct. J., 102(2).
38 Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int. J., 19(2), 485-501.   DOI
39 Hadi, M.N. and Tran, T.M. (2016), "Seismic rehabilitation of reinforced concrete beam-column joints by bonding with concrete covers and wrapping with FRP composites", Mater. Struct., 49(1-2), 467-485.   DOI
40 Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., Int. J., 26(4), 485-499.