1 |
Adali, S. and Makins, R.K. (1991), "Buckling of unsymmetrical, cross-ply laminates with matrix cracks", Int. J. Mech. Sci., 33(10), 851-861.
DOI
|
2 |
Arani, A.G., Kolahdouzan, F. and Abdollahian, M. (2018), "Buckling and free vibration analysis of FG-CNTRC-micro sandwich plate", Steel Compos. Struct., Int. J., 26(3), 273-287.
|
3 |
Asadi, H. (2017), "Numerical simulation of the fluid-solid interaction for CNT reinforced functionally graded cylindrical shells in thermal environments", Acta Astronautica, 138 214-224.
DOI
|
4 |
Asadi, H. and Wang, Q. (2017a), "An investigation on the aeroelastic flutter characteristics of FG-CNTRC beams in the supersonic flow", Compos. Part B: Eng., 116, 486-499.
DOI
|
5 |
Moradi-Dastjerdi, R. and Payganeh, G. (2017), "Thermoelastic dynamic analysis of wavy carbon nanotube reinforced cylinders under thermal loads", Steel Compos. Struct., Int. J., 25(3), 315-326.
|
6 |
Nikrad, S.F. and Asadi, H. (2015), "Thermal postbuckling analysis of temperature dependent delaminated composite plates", Thin-Wall. Struct., 97, 296-307.
DOI
|
7 |
Nikrad, S.F., Asadi, H., Akbarzadeh, A.H. and Chen, Z.T. (2015), "On thermal instability of delaminated composite plates", Compos. Struct., 132, 1149-1159.
DOI
|
8 |
Nikrad, S.F., Keypoursangsari, S., Asadi, H., Akbarzadeh, A.H. and Chen, Z.T. (2016), "Computational study on compressive instability of composite plates with off-center delaminations", Comput. Methods Appl. Mech. Eng., 310, 429-459.
DOI
|
9 |
Nikrad, S.F., Asadi, H. and Wang, Q. (2017), "Postbuckling behaviors of open section composite struts with edge delamination using a layerwise theory", Int. J. Non-Linear Mech., 95, 315-326.
DOI
|
10 |
Shen, H.-S. (2009a), "A comparison of buckling and postbuckling behavior of FGM plates with piezoelectric fiber reinforced composite actuators", Compos. Struct., 91(3), 375-384.
DOI
|
11 |
Shen, H.-S. (2009b), "Nonlinear bending of functionally graded carbon nanotube-reinforced composite plates in thermal environments", Compos. Struct., 91(1), 9-19.
DOI
|
12 |
Budiansky, B. and O'Connell, R.J. (1976), "Elastic moduli of a cracked solid", Int. J. Solids Struct., 12(2), 81-97.
DOI
|
13 |
Asadi, H. and Wang, Q. (2017), "Dynamic stability analysis of a pressurized FG-CNTRC cylindrical shell interacting with supersonic airflow", Compos. Part B: Eng., 118, 15-25.
DOI
|
14 |
Asadi, H., Souri, M. and Wang, Q. (2017), "A numerical study on flow-induced instabilities of supersonic FG-CNT reinforced composite flat panels in thermal environments", Compos. Struct., 171, 113-125.
DOI
|
15 |
Bahrami, M.N., Allahkarami, F. and Saryazdi, M.G. (2018), "Nonlinear forced vibration of FG-CNTs-reinforced curved microbeam based on strain gradient theory considering out-ofplane motion", Steel Compos. Struct., Int. J., 26(6), 673-691.
|
16 |
Dvorak, G.J., Laws, N. and Hejazi, M. (1985), "Analysis of progressive matrix cracking in composite laminates I. Thermoelastic properties of a ply with cracks", J. Compos. Mater., 19(3), 216-234.
DOI
|
17 |
Ebrahimi, F. and Farazmandnia, N. (2018), "Thermal buckling analysis of functionally graded carbon nanotube-reinforced composite sandwich beams", Steel Compos. Struct., Int. J., 27(2), 149-159.
|
18 |
Efraim, E. and Eisenberger, M. (2007), "Exact vibration analysis of variable thickness thick annular isotropic and FGM plates", J. Sound Vib., 299(4-5), 720-738.
DOI
|
19 |
Gayathri, P., Umesh, K. and Ganguli, R. (2010), "Effect of matrix cracking and material uncertainty on composite plates", Reliabil. Eng. Syst. Safe., 95(7), 716-728.
DOI
|
20 |
Tahouneh, V. (2018), "3-D Vibration analysis of FGMWCNTs/ Phenolic sandwich sectorial plates", Steel Compos. Struct., Int. J., 26(5), 649-662.
|
21 |
Keleshteri, M.M., Asadi, H. and Wang, Q. (2017b), "Postbuckling analysis of smart FG-CNTRC annular sector plates with surface-bonded piezoelectric layers using generalized differential quadrature method", Comput. Methods Appl. Mech. Eng., 325, 689-710.
DOI
|
22 |
Gudmundson, P. and Weilin, Z. (1993), "An analytic model for thermoelastic properties of composite laminates containing transverse matrix cracks", Int. J. Solids Struct., 30(23), 3211-3231.
DOI
|
23 |
Kashtalyan, M. and Soutis, C. (2013), "Predicting residual stiffness of cracked composite laminates subjected to multiaxial inplane loading", J. Compos. Mater., 47(20-21), 2513-2524.
DOI
|
24 |
Keleshteri, M.M., Asadi, H. and Wang, Q. (2017a), "Large amplitude vibration of FG-CNT reinforced composite annular plates with integrated piezoelectric layers on elastic foundation", Thin-Wall. Struct., 120, 203-214.
DOI
|
25 |
Keleshteri, M.M., Asadi, H. and Wang, Q. (2018), "On the snapthrough instability of post-buckled FG-CNTRC rectangular plates with integrated piezoelectric layers", Comput. Methods Appl. Mech. Eng., 331, 53-71.
DOI
|
26 |
Laws, N. and Dvorak, G.J. (1988), "Progressive transverse cracking in composite laminates", J. Compos. Mater., 22(10), 900-916.
DOI
|
27 |
Laws, N., Dvorak, G.J. and Hejazi, M. (1983), "Stiffness changes in unidirectional composites caused by crack systems", Mech. Mater., 2(2), 123-137.
DOI
|
28 |
Lee, J.-W. and Daniel, I.M. (1990), "Progressive transverse cracking of crossply composite laminates", J. Compos. Mater., 24(11), 1225-1243.
DOI
|
29 |
Lei, Z.X., Zhang, L.W. and Liew, K.M. (2016b), "Parametric analysis of frequency of rotating laminated CNT reinforced functionally graded cylindrical panels", Compos. Part B: Eng., 90, 251-266.
DOI
|
30 |
Lei, Z.X., Zhang, L.W. and Liew, K.M. (2016a), "Analysis of laminated CNT reinforced functionally graded plates using the element-free kp-Ritz method", Compos. Part B: Eng., 84, 211-221.
DOI
|
31 |
Liu, W.K., Jun, S., Li, S., Adee, J. and Belytschko, T. (1995), "Reproducing kernel particle methods for structural dynamics", Int. J. Numer. Methods Eng., 38(10), 1655-1679.
DOI
|
32 |
Makins, R.K. and Adali, S. (1991), "Bending of cross-ply laminated plates with matrix cracks", J. Strain Anal. Eng. Des., 26(4), 253-257.
DOI
|
33 |
Mehri, M., Asadi, H. and Wang, Q. (2016a), "Buckling and vibration analysis of a pressurized CNT reinforced functionally graded truncated conical shell under an axial compression using HDQ method", Methods Appl. Mech. Eng., 303, 75-100.
DOI
|
34 |
Mehri, M., Asadi, H. and Wang, Q. (2016b), "On dynamic instability of a pressurized functionally graded carbon nanotube reinforced truncated conical shell subjected to yawed supersonic airflow", Compos. Struct., 153, 938-951.
DOI
|
35 |
Mehri, M., Asadi, H. and Kouchakzadeh, M.A. (2017), "Computationally efficient model for flow-induced instability of CNT reinforced functionally graded truncated conical curved panels subjected to axial compression", Comput. Methods Appl. Mech. Eng., 318, 957-980.
DOI
|
36 |
Mohammadzadeh-Keleshteri, M., Asadi, H. and Aghdam, M.M. (2017), "Geometrical nonlinear free vibration responses of FGCNT reinforced composite annular sector plates integrated with piezoelectric layers", Compos. Struct., 171, 100-112.
DOI
|