Browse > Article
http://dx.doi.org/10.12989/scs.2018.27.6.675

Buckling-restrained brace with CFRP encasing: Mechanical behavior & cyclic response  

Razavi, S. Ali (Faculty of Civil Engineering, University of Tehran)
Kianmehr, Amirhossein (Faculty of Civil Engineering, University of Tehran)
Hosseini, Abdollah (Faculty of Civil Engineering, University of Tehran)
Mirghaderi, S. Rasoul (Faculty of Civil Engineering, University of Tehran)
Publication Information
Steel and Composite Structures / v.27, no.6, 2018 , pp. 675-689 More about this Journal
Abstract
Buckling-restrained braces (BRBs) have received considerable attention in seismic design of various types of structures. Conventional BRBs are composed of steel core and surrounding steel tube filled with concrete. Eliminating the steel tube can be advantageous to BRB. In this study the idea of replacing the steel tube by CFRP layers in BRBs is proposed. The advantages of this type of BRB are mentioned, and its design criteria are introduced. The construction procedure of two BRB specimens is described. The specimens are uniaxially tested based on moderate, and severe earthquake levels and the performance of the specimens is investigated. The backbone curves resulted from the hysteresis curve are presented for the design proposes. The results of this study show that CFRP layers can effectively provide the expected performance of the encasing, and the proposed BRB can be considered a viable alternative to the conventional BRBs.
Keywords
buckling-restrained brace; CFRp layers; cyclic test; design criteria;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 ACI 318 (2014), Building Code Requirements for Structural Concrete; American Concrete Institute, Farmington Hills, MI, USA.
2 AISC 341 (2010), Seismic provisions for structural steel buildings; American Institute of Steel Construction, Chicago, IL, USA.
3 ASCE 7 (2010), Minimum Design Loads for Buildings and Other Structures; American Society of Civil Engineers.
4 ASCE 41 (2013), Seismic Evaluation and Retrofit of Existing Buildings; American Society of Civil Engineers.
5 Black, C., Makris, N. and Aiken, I. (2002), "Component testing, stability analysis and characterization of buckling restrained braces", Pacific Earthquake Engineering Research Center, University of California at Berkeley, CA, USA.
6 Ekiz, E. and El-Tawil, S. (2008), "Restraining steel brace buckling using a carbon fiber-reinforced polymer composite system: Experiments and computational simulation", J. Compos. Constr., 12(5), 562-569.   DOI
7 Chou, C.C. and Chen, S.Y. (2010), "Subassemblage tests and finite element analyses of sandwiched buckling-restrained braces", Eng. Struct., 32(8), 2108-2121.   DOI
8 DIN 17100, Steel for general structural purposes: Deutsches Institut fur Normung.
9 Dusicka, P. and Wiley, B. (2008), "Concept of buckling restraint of steel braces with fiber reinforced polymers", Proceedings of the 2008 Structures Congress, Vancouver, BC, Canada, April.
10 El-Tawil, S. and Ekiz, E. (2009), "Inhibiting steel brace buckling using carbon fiber-reinforced polymers: Large-scale tests", J. Struct. Eng., 135(5), 530-538.   DOI
11 Genna, F. and Gelfi, P. (2012a), "Analysis of the Lateral Thrust in Bolted Steel Buckling-Restrained Braces. I: Experimental and Numerical Results", J. Struct. Eng., 138, 1231-1243.   DOI
12 Genna, F. and Gelfi, P. (2012b), "Analysis of the Lateral Thrust in Bolted Steel Buckling-Restrained Braces. II: Engineering Analytical Estimates", J. Struct. Eng., 138, 1244-1254.   DOI
13 ACI 544.1 R-96 (2002), State-of-the-Art Report on Fiber Reinforced Concrete; American Concrete Institute.
14 ACI 440.2 R-08 (2008), Building Code Requirements for Structural Concrete; American Concrete Institute, Farmington Hills, MI, USA.
15 ASTM A820 (2001), Standard Specification for Steel Fibers for Fiber-Reinforced Concrete.
16 Park, J., Lee, J. and Kim, J. (2012), "Cyclic test of buckling restrained braces composed of square steel rods and steel tube", Steel Compos. Struct., Int. J., 13(5), 423-436.   DOI
17 Lin, P.C., Tsai, K.C., Wang, K.J., Yu, Y.J., Wei, C.Y., Wu, A.C., Tsai, C.Y., Lin, C.H., Chen, J.C. and Schellenberg, A.H. (2011), "Seismic design and hybrid tests of a full-scale three-story buckling-restrained braced frame using welded end connections and thin profile", Earthq. Eng. Struct. Dyn., 41(5), 1001-1020.   DOI
18 Kakaletsis, D.J. (2016), "Comparative experimental assessment of seismic rehabilitation with CFRP strips and sheets on RC frames", Eartq. Struct., Int. J., 10(3), 613-628.
19 Nilson, A., Darwin, D. and Dolan, C.W. (2010), Design of Concrete Structures, Mac Graw Hil.
20 Razavi, S.A., Shemshadian, M.E., Mirghaderi, S.R. and Ahlehagh, S. (2011), "Seismic design of buckling restrained braced frames with reduced core length", Proceedings of Structural Engineering World Congres, Italy.
21 Su, L., Li, X. and Wang, Y. (2016), "Experimental study and modelling of CFRP-confined damaged and undamaged square RC columns under cyclic loading", Steel Compos. Struct., Int. J., 21(2), 411-427.   DOI
22 Tabatabaei, S.A.R., Mirghaderi, S.R. and Hosseini, A. (2014), "Experimental and numerical developing of reduced length buckling-restrained braces", Eng. Struct., 77, 143-160.   DOI
23 Tremblay, R., Bolduc, P., Neville, R. and DeVall, R. (2006), "Seismic testing and performance of buckling-restrained bracing system", Can. J. Civil Eng., 33(2), 183-198.   DOI
24 Watanabe, A., Hitomi, Y., Saeki, E., Wada, A. and Fujimoto, M. (1988), "Properties of brace encased in buckling-restraining concrete and steel tube", Proceedings of the 9th World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan, Volume 4, pp. 719-724.
25 Uang, C.M. and Nakashima, M. (2004), "Steel buckling-restrained braced frames", (Yousef Bozorgnia and Vitelmo V. Bertero Eds.), In: Earthquake Engineering from Engineering Seismology to Performance Based Engineering, CRC Press.
26 Wang, Q. and Shao, Y. (2014), "Compressive performances of concrete filled Square CFRP-Steel Tubes (S-CFRP-CFST)", Steel Compos. Struct., Int. J., 16(5), 455-480.   DOI