Browse > Article
http://dx.doi.org/10.12989/scs.2018.27.1.049

A practical model for simulating nonlinear behaviour of FRP strengthened RC beam-column joints  

Shayanfar, Javad (Department of Civil Engineering, University of Mazandaran)
Bengar, Habib Akbarzadeh (Department of Civil Engineering, University of Mazandaran)
Publication Information
Steel and Composite Structures / v.27, no.1, 2018 , pp. 49-74 More about this Journal
Abstract
Generally, beam-column joints are taken into account as rigid in assessment of seismic performance of reinforced concrete (RC) structures. Experimental and numerical studies have proved that ignoring nonlinearities in the joint core might crucially affect seismic performance of RC structures. On the other hand, to improve seismic behaviour of such structures, several strengthening techniques of beam-column joints have been studied and adopted in practical applications. Among these strengthening techniques, the application of FRP materials has extensively increased, especially in case of exterior RC beam-column joints. In current paper, to simulate the inelastic response in the core of RC beam-column joints strengthened by FRP sheets, a practical joint model has been proposed so that the effect of FRP sheets on characteristics of an RC joint were considered in principal tensile stress-joint rotation relations. To determine these relations, a combination of experimental results and a mechanically-based model has been developed. To verify the proposed model, it was applied to experimental specimens available in the literature. Results revealed that the model could predict inelastic response of as-built and FRP strengthened joints with reasonable precision. The simple analytic procedure and the use of experimentally computed parameters would make the model sufficiently suitable for practical applications.
Keywords
beam-column joint; nonlinear analysis; fiber-reinforced polymer (FRP); principal tensile stress; practical model;
Citations & Related Records
Times Cited By KSCI : 8  (Citation Analysis)
연도 인용수 순위
1 El-Amoury, T. (2003), "Seismic rehabilitation of concrete frame beam-column joints", Ph.D. Dissertation; McMaster University, ON, Canada.
2 El-Amoury, T. and Ghobarah, A. (2002), "Seismic rehabilitation of beam-column joint using GFRP sheets", Eng. Struct., 24, 1397-1407.   DOI
3 Elmorsi, M., Kianoush, M.R. and Tso, W.K. (2000), "Modeling bond-slip deformations in reinforced concrete beam-column joints", Can. J. Civ. Eng., 273, 490-505.
4 Elwood, K. (2002), "Shake table tests and analytical studies on the gravity load collapse of reinforced concrete frames", Ph.D. Dissertation; University of California, Berkeley, CA, USA.
5 Eslami, A. and Ronagh, H.R. (2014), "Experimental investigation of an appropriate anchorage system for flange-bonded carbon fiber reinforced polymers in retrofitted RC beam-column joints", J. Comps. Constr., 18(4), 04013056.   DOI
6 Eslami, A. and Ronagh, H. (2015), "Numerical Investigation on the Seismic Retrofitting of RC Beam-Column Connections Using Flange-Bonded CFRP Composites", J. Compos. Constr., 20(1), 04015032.
7 Eslami, A., Dalalbashi, A. and Ronagh, H.R. (2013), "On the effect of plastic hinge relocation in RC buildings using CFRP", Compos. Part B: Eng., 52, 350-361.   DOI
8 Fakharifar, M., Sharbatdar, M.K., Lin Z., Dalvand, A., Sivandi-Pour, A. and Chen, G. (2014), "Seismic performance and global ductility of RC frames rehabilitated with retrofitted joints by CFRP laminates", Earthq. Eng. Vib., 13(1), 59-73.   DOI
9 Favvata, M.J., Izzuddin, B.A. and Karayannis, C.G. (2008), "Modelling exterior beam-column joints for seismic analysis of RC frame structures", Earthq. Eng. Struct. Dyn., 37(13), 1527-1548.   DOI
10 Galal, K., Arafa, A. and Ghobarah, A. (2005), "Retrofit of RC square short columns", Eng. Struct., 27(5), 801-813.   DOI
11 Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain behavior of confined concrete", J. Struct. Eng., 114(8), 1804-1826.   DOI
12 Lowes, L.N. and Altoontash, A. (2003), "Modeling reinforcedconcrete beam-column joints subjected to cyclic loading", J. Struct. Eng., 1686-1697.
13 Lynn, A.C. (2001), "Seismic evaluation of existing reinforced concrete building columns", Ph.D. Dissertation; University of California, Berkeley, CA, USA.
14 Mahini, S.S. and Ronagh, H.R. (2011), "Web-bonded FRPs for relocation of plastic hinges away from the column face in exterior RC joints", Compos. Struct., 93, 2460-2472.   DOI
15 Manfredi, G. and Realfonzo, R. (2001), "Modellazione del comportamento di elementi presso-inflessi in c.a. confinati con tessuti in materiale composito", Tech. Rep., 10 Convegno Nazionale "L'ingegneria Sismica in Italia", Potenza-Matera, Italy.
16 Melo, J., Varum, H., Rossetto, T. and Costa, A. (2012), "Cyclic response of RC beam-column joints reinforced with plain bars: an experimental testing campaign", Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
17 Garcia, R., Jemaa, Y., Helal, Y., Maurizio, G. and Pilakoutas, K. (2013), "Seismic strengthening of severely damaged beamcolumn RC joints using CFRP", J. Comps. Constr., 18(2), 04013048.
18 Mitra, N. and Lowes, L. (2007), "Evaluation, calibration, and verification of a reinforced concrete beam-column joint model", J. Struct. Eng., 133(1), 105-120.   DOI
19 Moretti, M. and Tassios, T.P. (2007), "Behaviour of short columns subjected to cyclic shear displacements: Experimental results", Eng. Struct., 29(8), 2018-2029.   DOI
20 Murty, C.V.R, Rai, D, Bajpai, K.K. and Jain, S.K. (2003), "Effectiveness of reinforcement details in exterior reinforced concrete beam-column joints for earthquake resistance", ACI Struct. J., 100(2), 149-156.
21 Genesio, G. (2012), "Seismic assessment of RC exterior beamcolumn joints and retrofit with haunches using post-installed anchors", Ph.D. Dissertation; University of Stuttgart, Stuttgart, Germany.
22 George, I., Kalogeropoulos, G., Tsonos, A.G., Konstandinidis, D. and Tsetines, S. (2016), "Pre-earthquake and post-earthquake retrofitting of poorly detailed exterior RC beam-to-column joints", Eng. Struct., 109, 1-15.   DOI
23 Gergely, B.J., Pantelides, C.P. and Reaveley, L.D. (2000), "Shear strengthening RCT-joints using CFRP composites", J. Compos. Constr., 4, 56-64.   DOI
24 Ghobarah, A. and Said, A. (2002), "Shear strengthening of beam- column joints", Eng. Struct., 24, 881-888.   DOI
25 Ghobarah, A. and El-Amoury, T. (2005), "Seismic rehabilitation of deficient exterior concrete frame joints", J. Compos. Constr., 9, 408-416.   DOI
26 Ghobarah, A. and Galal, K. (2004), "Seismic rehabilitation of short rectangular RC columns", J. Earthq. Eng., 8, 45-68.
27 Ghobarah, A. and Said, A. (2001), "Seismic rehabilitation of beam-column joints using FRP laminates", J. Earthq. Eng., 5(1), 113-129.   DOI
28 Ha, G.J., Cho, C.G., Kang, H.W. and Feo, L. (2013), "Seismic improvement of RC beam-column joints using hexagonal CFRP bars combined with CFRP sheets", Compos. Struct., 95, 464-470.   DOI
29 Hadi, M.N.S. and Tran, T.M. (2015), "Seismic rehabilitation of reinforced concrete beam-column joints by bonding with concrete covers and wrapping with FRP composites", Mater. Struct., 49, 1-19.
30 Najafgholipour, M.A., Dehghan, S.M., Dooshabi, A. and Niroomandi, A. (2017), "Finite element analysis of reinforced concrete beam-column connections with governing joint shear failure mode", Latin Am. J. Solids Struct., 14(7), 1200-1225.   DOI
31 Neubauer, U. and Rostasy, F.S. (1997), "Design aspects of concrete structures strengthened with externally bonded CFRPplates", Proceedings of the 7th International conference on Structural Faults and Repair, London, England, July.
32 Niroomandi, A., Maheri, A., Maheri, M.R. and Mahini, S.S. (2010), "Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets", Eng. Struct., 32, 2326-2336.   DOI
33 Niroomandi, A., Najafgholipour, M.A. and Ronagh, H.R. (2014), "Numerical investigation of the affecting parameters on the shear failure of nonductile RC exterior joints", Eng. Failure Anal., 46, 62-75.   DOI
34 Akbarzadeh, B.H., Shayanfar, J. and Seyedpour, S.M. (2015), "An artificial neural network (ANN) model for predicting the moment-rotation of exterior RC beam-column joints strengthened by CFRP composites", Proceedings of the 2th International and the 6th National Conference on Earthquake & Structures, Kerman, Iran, October.
35 ACI 440.2R-02 (2002), Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures, Committee 440 Report; American Concrete Institute, Detroit, MI, USA.
36 Adhikary, B.B., Mutsuyoshi, H. and Ashraf, M. (2004), "Shear strengthening of reinforced concrete beams using fiberreinforced polymer sheets with bonded anchorage", Struct. J., 101(5), 660-668.
37 Akbarzadeh, B.H. and Shayanfar, J. (2015), "Seismic performance of RC frames joints retrofitted by CFRP composites", Proceedings of the 2th International and the 6th National Conference on Earthquake & Structures, Kerman, Iran, October.
38 Akbarzadeh, B.H., Abdollahtabar, M. and Shayanfar, J. (2016), "Predicting the Ductility of RC Beams Using Nonlinear Regression and ANN", Iran. J. Sci. Technol. Transact. Civil Eng., 40(4), 297-310.   DOI
39 Akguzel, U. (2011), "Seismic performance of FRP retrofitted exterior RC beam-column joints under varying axial and bidirectional loading", Ph.D. Dissertation; University of Canterbury, Christchurch, SI, USA.
40 Niroomandi, A., Pampanin, S., Dhakal, R, and Soleymani Ashtiani, M. (2015), "Comparison of alternative assessment procedures to predict seismic performance of RC columns", In: Proceedings of Tenth Pacific Conference on Earthquake Engineering, Sydney, Australia.
41 Omidi, B. and Behnamfar, F. (2015), "A numerical model for simulation of RC beam-column connections", Eng. Struct., 88, 51-73.   DOI
42 O'Reilly, G.J. and Sullivan, T.J. (2017), "Modeling techniques for the seismic assessment of the existing Italian RC frame structures", J. Earthq. Eng.,1-35.
43 Pantazopoulou, S. and Bonacci, J. (1992), "Consideration of questions about beam-column joints", ACI Struct. J., 89(1), 27-36.
44 Parvin, A. and Granata, P. (2000), "Investigation on the effects of fiber composites at concrete joints", Compos. Part. B: Eng., 31, 499-509.   DOI
45 Al-Salloum, Y.A. and Almusallam, T.H. (2007), "Seismic response of interior beam-column joints upgraded with FRP sheets. II: Analysis and parametric study", J. Compos. Constr., 11(6), 575-590.   DOI
46 Akguzel, U. and Pampanin, S. (2010), "Effects of variation of axial load and bi-directional loading on seismic performance of GFRP retrofitted reinforced concrete exterior beam-column joints", J. Compos. Constr., 14(1), 94-104.   DOI
47 Akguzel, U. and Pampanin, S. (2012), "Assessment and design procedure for the seismic retrofit of reinforced concrete beam- column joints using FRP composite materials", J. Compos. Constr., 16, 21-34.   DOI
48 Allington, C.J. (2003), "Seismic performance of moment resisting frame members produced from lightweight aggregate concrete", Ph.D. Dissertation; University of Canterbury, Christchurch, SI, USA.
49 Antonopoulos, C.P. and Triantafillou, T.C. (2002), "Analysis of FRP strengthened beam-column joints", J. Compos. Constr., 6(1), 41-51.   DOI
50 Antonopoulos, C.P. and Triantafillou, T.C. (2003), "Experimental investigation of FRP strengthened RC beam column joints", J. Compos. Constr., 7, 39-49.   DOI
51 Biddah, A., and Ghobarah, A. (1999), "Modelling of shear deformation and bond slip in reinforced concrete joints", Struct. Eng. Mech., Int. J., 7(4), 413-432.   DOI
52 Bousselham, A. (2010), "State of research on seismic retrofit of RC beam-column joints with externally bonded FRP", J. Compos. Constr., 14, 49-61.   DOI
53 Calvi, G.M., Magenes, G. and Pampanin, S. (2002), "Relevance of beam-column joint damage and collapse in RC frame assessment", J. Earthq. Eng., 6, 75-100.
54 Clyde, C., Pantelides, C.P. and Reaveley, L.D. (2000), "Performance-based evaluation of exterior reinforced concrete building joints for seismic excitation", Report PEER 2000/05; Pacific Earthquake Engineering Research Center.
55 Campione, G., Cavaleri, L. and Papia, M. (2015), "Flexural response of external R.C. beam-column joints externally strengthened with steel cages", Eng. Struct., 104, 51-64.   DOI
56 Chalioris, C.E., Favvata, M. and Karayannis, C.G. (2008), "Reinforced concrete beam-column joints with crossed inclined bars under cyclic deformations", J. Earthq. Eng. Struct. Dyn., 37, 881-897.   DOI
57 Chen, W.F. (1982), Plasticity in Reinforced Concrete, McGraw-Hill, New York, NY, USA, pp. 204-205.
58 Computer and Structures Inc. (SAP2000) (2008), Analysis References, Berkeley, CA, USA.
59 Dalalbashi, A., Eslami, A. and Ronagh, H.R. (2013), "Numerical investigation on the hysteretic behavior of RC joints retrofitted with different CFRP con figurations", J. Compos. Constr., 17, 371-382.   DOI
60 De Risi, M.T. and Verderame, G.M. (2017), "Experimental assessment and numerical modelling of exterior nonconforming beam-column joints with plain bars", Eng. Struct., 150, 115-134.   DOI
61 Tasligedik, A.S. (2017), "Capacity estimation of FRP strengthened RC beam-column joints using hierarchy of strength assessment", Bull. Earthq. Eng., 1-18.
62 Tasligedik, A.S., Akguzel, U., Kam, W.Y. and Pampanin, S. (2016), "Strength hierarchy at reinforced concrete beam-column joints and global capacity", J. Earthq. Eng., 1-34.
63 Triantafillou, T.C. (1998), "Shear strength of reinforced concrete beams using epoxy-bonded FRP composites", ACI Struct. J., 95(2), 107-115.
64 Tsonos, A.G. (2002b), "Seismic repair of exterior R/C beam-tocolumn joints using two sided jackets", Struct. Eng. Mech., Int. J., 13(1), 17-34.   DOI
65 Hadi, M.N. and Tran, T.M. (2016), "Seismic rehabilitation of reinforced concrete beam-column joints by bonding with concrete covers and wrapping with FRP composites", Mater. Struct., 49(1-2), 467-485.   DOI
66 Hadigheh, S.A., Mahini, S.S. and Maheri, M.R. (2014), "Seismic behavior of FRP-retrofitted reinforced concrete frames", J. Earthq. Eng., 18(8), 1171-1197.   DOI
67 Truong, G.T., Dinh, N.H., Kim, J.C. and Choi, K.K. (2017), "Seismic performance of exterior RC beam-column joints retrofitted using various retrofit solutions", Int. J. Concrete Struct. Mater., 11(3), 415-433.   DOI
68 Tsonos, A.G. (2001), "Seismic rehabilitation of reinforced concrete joints by the removal and replacement technique", Eur. Earthq. Eng., 3, 29-43.
69 Tsonos, A.G. (2002a), "Seismic repair of exterior R/C beam-tocolumn joints using two sided and three-sided jackets", Struct. Eng. Mech., Int. J., 13, 17-34.   DOI
70 Tsonos, A.G. (2014), "An innovative solution for strengthening old R/C structures and for improving the FRP strengthening method", Struct. Monit. Mainten. Int. J., 1(3), 323-338.
71 Wang, Y.C. and Restrepo, J.I. (2001), "Investigation of concentrically loaded reinforced concrete columns confined with glass fiber-reinforced polymer jackets", ACI Struct. J., 98(3), 377-385.
72 Wong, H.F. (2005), "Shear strength and seismic performance of non-seismically designed reinforced concrete beam-column joints", Ph.D. Dissertation; Hong Kong University of Science and Technology, Kwoloon, Hong Kong.
73 Ho, J.C.M. and Pam, H.J. (2003), "Inelastic design of low-axially loaded high-strength reinforced concrete columns", Eng. Struct., 25(8), 1083-1096.   DOI
74 Hassan, W.M. (2011), "Analytical and experimental assessment of seismic vulnerability of beam-column joints without transverse reinforcement in concrete buildings", Ph.D. Dissertation; University of California, Berkeley, CA, USA.
75 Helal, Y. (2012), "Seismic strengthening of deficient exterior RC beam-column sub-assemblages using posttensioned metal strips", Ph.D. Dissertation; Department of Civil & Structural Engineering, University of Sheffield, England.
76 Hognestad, E. (1951), "A Study of Combined Bending and Axial Load in Reinforced Concrete Members", Bulletin 399, Engineering Experimental Station, University of Illinois, IL, USA.
77 Holzenkampfer, P. (1994), "Ingenieurmodelle des verbundes geklebterbewehrung fur betonbauteile", Ph.D. Dissertation; TU Braunshwieg. [In German]
78 Kam, W.Y. (2010), "Selective Weakening and Post-tensioning for the Seismic Retrofit of Non-Ductile RC Frames", Ph.D. Dissertation; University of Canterbury, Christchurch, New Zealand.
79 Karayannis, C.G. and Sirkelis, G. (2008), "Strengthening and rehabilitation of RC beam-column joints using carbon-FRP jacketing and epoxy resin injection", Earthq. Eng. Struct. Dyn., 37(5), 769-790.   DOI
80 Karayannis, C.G., Chalioris, C.E. and Sideris, K.K. (1998), "Effectiveness of RC beam-column connection repair using epoxy resin injections", J. Earthq. Eng., 2(2), 217-240.   DOI
81 Pampanin, S., Bolognini, D. and Pavese, A. (2007), "Performancebased seismic retrofit strategy for existing RC frame systems using FRP composites", J. Compos. Constr., 11(2), 211-226.   DOI
82 Parvin, A. and Wu, S. (2008), "Ply angle effect on fiber composite wrapped reinforced concrete beam-column connections under combined axial and cyclic loads", Compos. Struct., 82(4), 532-538.   DOI
83 Parvin, A., Altay, S., Yalcin, C. and Kaya, O. (2010), "CFRP Rehabilitation of concrete frame joints with inadequate shear and anchorage details", J. Compos. Constr., 14(1), 72-82.   DOI
84 Pampanin, S., Calvi, G.M. and Moratti, M. (2002), "Seismic behavior of RC beam-column joints designed for gravity only", Proceedings of the 12th European Conference on Earthquake Engineering (ECEE), London, UK.
85 Pampanin, S., Magenes, G. and Carr, A. (2003), "Modelling of shear hinge mechanism in poorly detailed RC beam-column joints", Fib Symposium on Concrete Structures in Seismic Regions, Athens, Greece, May.
86 Pampanin, S., Christopoulos, C. and Chen, T.H. (2006), "Development and validation of a metallic haunch seismic retrofit solution for existing under-designed RC frame buildings", Earthq. Eng. Struct. D., 35, 1739-1766.   DOI
87 Pantelides, C.P., Hansen, J., Nadauld, J. and Reaveley, L.D. (2002), "Assessment of reinforced concrete building exterior joints with substandard details", Report no. PEER 2002/18; Pacific Earthquake Engineering Research Center.
88 Park, S. and Mosalam, K.M. (2012), "Parameters for shear strength prediction of exterior beam-column joints without transverse reinforcement", Eng. Struct., 36, 198-209.   DOI
89 Park, R., Priestley, M.J.N. and Gill, W.D. (1982), "Ductility of square-confined concrete columns", J. Struct. Eng., 108, 929-950.
90 Shafaei, J., Zareian, M.S., Hosseini, A. and Marefat, M.S. (2014), "Effects of joint flexibility on lateral response of reinforced concrete frames", Eng. Struct., 81, 412-431.   DOI
91 Sharma, A. (2013), "Seismic behavior and retrofitting of RC frame structures with emphasis on beam-column joints - experiments and numerical modeling", Ph.D. Dissertation; University of Stuttgart, Stuttgart, Germany.
92 Sharma, A., Eligehausen, R. and Reddy, G.R. (2011), "A new model to simulate joint shear behavior of poorly detailed beam- column connections in RC structures under seismic loads, part I: exterior joints", Eng. Struct., 33, 1034-1051.   DOI
93 Shayanfar, J. and Akbarzadeh, B.H. (2016a), "Numerical model to simulate shear behaviour of RC joints and columns", Comput. Concrete, 18(4), 877-901.   DOI
94 Shayanfar, J. and Akbarzadeh, B.H. (2016b), "Nonlinear analysis of RC frames considering shear behaviour of members under varying axial load", Bull. Earthq. Eng., 1-24.
95 Shayanfar, J., Akbarzadeh B.H. and Niroomandi, A. (2016), "A proposed model for predicting nonlinear behavior of RC joints under seismic loads", Mater. Des., 95, 563-579.   DOI
96 Shin, M. and LaFave, J.M. (2004), "Testing and modelling for cyclic joint shear deformations in RC beam-column connections", Proceedings of the 13th world conference on earthquake engineering, London, England, August.
97 Shrestha, R., Smith, S.T. and Samali, B. (2009), "Strengthening RC beam-column connections with FRP strips", Proceedings of the Institution of Civil Engineers - Structures and Buildings 162(5), 323-334.   DOI
98 Sung, Y.C., Liu, K.Y., Su, C.K., Tsai, I.C. and Chang, K.C. (2005), "A study on pushover analyses of reinforced concrete columns", J. Struct. Eng. Mech., 21, 35-52.   DOI
99 De Risi, M.T., Ricci, P. and Verderame, G.M. (2017), "Modelling exterior unreinforced beam-column joints in seismic analysis of non-ductile RC frames", Earthq. Eng. Struct. Dyn., 46(6), 899-923.   DOI
100 De Risi, M.T., Ricci, P., Verderame, G.M. and Manfredi, G. (2016), "Experimental assessment of unreinforced exterior beam-column joints with deformed bars", Eng. Struct., 112, 215-232.   DOI
101 Del Zoppo, M., Di Ludovico, M., Balsamo, A., Prota, A. and Manfredi, G. (2017), "FRP for seismic strengthening of shear controlled RC columns: Experience from earthquakes and experimental analysis", Compos. Part B: Eng., 129, 47-57.   DOI
102 Del Vecchio, C., Di Ludovico, M., Balsamo, A., Prota, A., Manfredi, G. and Dolce, M. (2014), "Experimental investigation of exterior RC beam-column joints retrofitted with FRP systems", J. Compos. Constr., 18, 1-13.
103 Del Vecchio C., Di Ludovico, M., Prota, A. and Manfredi, G. (2015), "Analytical model and design approach for FRP strengthening of non-conforming RC corner beam-column joints", Eng. Struct., 87, 8-20.   DOI
104 Del Vecchio, C., Di Ludovico, M., Prota, A. and Manfredi, G. (2016), "Modelling beam-column joints and FRP strengthening in the seismic performance assessment of RC existing frames", Compos. Struct., 142, 107-116.   DOI
105 Del Vecchio, C., Gentile, E.R. and Pampanin, S. (2017), "The simplified lateral mechanism analysis (SLaMa) for the seismic performance assessment of a case study building damaged in the 2011 Christchurch earthquake", Research Report 2016-02; Civil & Natural Resources Engineering.
106 Di Ludovico, M., Balsamo, A., Prota, A., Verderame, G.M., Dolce, M. and Manfredi, G. (2012), "Preliminary results of an experimental investigation on RC beam-column joints", CICE Rome: International Institute for FRP in Construction, p. 1-9.
107 Kheyroddin, A., Khalili, A., Emami, E. and Sharbatdar, M.K. (2016), "An innovative experimental method to upgrade performance of external weak RC joints using fused steel prop plus sheets", Steel Compos. Struct., Int. J., 21(2), 443-460.   DOI
108 Yurdakul, O. and Avsar, O. (2016), "Strengthening of substandard reinforced concrete beam-column joints by external posttension rods", Eng. Struct., 107, 9-22.   DOI
109 Karayannis, C.G., Chalioris, C.E. and Sirkelis, G.M. (2008), "Local retrofit of external RC beam column joints using thin RC jackets: An experimental study", J. Earthq. Eng. Struct. Dyn., 37(5), 727-746.   DOI
110 Kaya, O., Yalcin, C., Parvin, A. and Altay, S. (2008), "Repairing of shear-damaged RC joint panel zone using chemical epoxy injection methodology", Proceedings of 14th World Conference on Earthquake Engineering, Beijing, China.
111 Kim, C.G., Eom, T.S., Park, H.G. and Kim, T.W. (2016), "Seismic Performance of Lightly Reinforced Concrete Beam-Column Connections for Low-Rise Buildings", J. Architect. Inst. Korea Struct. Constr., 32(3), 19-30.   DOI
112 Kwan, A.K.H., Dong, C.X. and Ho, J.C.M. (2015), "Axial and lateral stress-strain model for FRP confined concrete", Eng. Struct., 99, 285-295.   DOI
113 Laterza, M., D'Amato, M. and Gigliotti, R. (2017), "Modeling of gravity-designed RC sub-assemblages subjected to lateral loads", Eng. Struct., 130, 242-260.   DOI
114 Lee, J.H. and Shin, S.J. (2010), "Shear Strength Prediction of FRP RC Baem without Shear Reinforcements", J. Korea Concrete Inst., 22(3), 313-324.   DOI
115 Priestley, M.J.N., Verma, R. and Xiao, Y. (1994), "Seismic shear strength of reinforced concrete columns", J. Struct. Eng., 120(8), 2310-2329.   DOI
116 Park, H., Yu, E. and Choi, K. (2012), "Shear-strength degradation model for RC columns subjected to cyclic loading", Eng. Struct., 34, 187-197.   DOI
117 Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley Publications, New York, NY, USA.
118 Le-Trung, K., Lee, K., Lee, J., Lee, D.H. and Woo, S. (2010), "Experimental study of RC beam-column joints strengthened using CFRP composites", Compos. Part B: Eng., 41(1), 76-85.   DOI
119 Liu, C. (2006), "Seismic behaviour of beam-column joint subassemblies reinforced with steel fibers", Master Thesis; University of Canterbury, Christchurch, New Zealand.
120 Priestley, M.J.N. (1997), "Displacement based seismic assessment of reinforced concrete buildings", J. Earthq. Eng., 1(1), 157-192.   DOI
121 Priestley, M.J.N., Seible, F. and Calvi, G.M. (1996), Seismic Design and Retrofit of Bridge Structures, John Wiley and Sons, New York, NY, USA.
122 Realfonzo, R., Napoli, A, and Pinilla, J.G.R. (2014), "Cyclic behavior of RC beam-column joints strengthened with FRP systems", Constr. Build. Mater., 54, 282-297.   DOI
123 Ricci, P., De Risi, M.T., Verderame, G.M. and Manfredi, G. (2016), "Experimental tests of unreinforced exterior beam- column joints with plain bars", Eng. Struct., 118, 178-194.   DOI
124 Ronagh, H.R. and Eslami, A. (2013), "Flexural retrofitting of RC buildings using GFRP/CFRP - A comparative study", Compos. Part B: Eng., 46, 188-196.   DOI
125 Sezen, H. (2002), "Seismic behavior and modeling of reinforced concrete building columns", Ph.D. Dissertation; University of California, Berkeley, CA, USA.
126 Park, H., Choi, K. and Wight, J.K. (2006), "Strain-based shear strength model for slender beams without web reinforcement", ACI Struct. J., 103(6), 783-793.
127 Sezen, H. and Moehle, J.P. (2004), "Shear strength model for lightly reinforced concrete columns", J. Struct. Eng., 130(11), 1692-1703.   DOI