Browse > Article
http://dx.doi.org/10.12989/scs.2017.25.4.403

Multi-objective durability and layout design of fabric braided braking hose in cyclic motion  

Cho, J.R. (Department of Naval Architecture and Ocean Engineering, Hongik University)
Kim, Y.H. (Graduate School of Mechanical Engineering, Pusan National University)
Publication Information
Steel and Composite Structures / v.25, no.4, 2017 , pp. 403-413 More about this Journal
Abstract
The fabric braided braking hose that delivers the driver's braking force to brake cylinder undergoes the large deformation cyclic motion according to the steering and bump/rebound motions of vehicle. The cyclic large deformation of braking hose may give rise to two critical problems: the interference with other adjacent vehicle parts and the micro cracking stemming from the fatigue damage accumulation. Hence, both the hose deformation and the fatigue damage become the critical issue in the design of braking hose. In this context, this paper introduces a multi-objective optimization method for minimizing the both quantities. The total length of hose and the helix angles of fabric braided composite layers are chosen for the design variables, and the maximum hose deformation and the critical fatigue life cycle are defined by the individual single objective functions. The trade-off between two single objective functions is made by introducing the weighting factors. The proposed optimization method is validated and the improvement of initial hose design is examined through the benchmark simulation. Furthermore, the dependence of optimum solutions on the weighting factors is also investigated.
Keywords
fabric braided rubber hose; cyclic motion; multi-objective optimization; durability and deformed layout; helix angle and hose length;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Stalnaker, D.O. and Turner, J.L. (2002), "Vehicle and course characterization process for indoor tire wear simulation", Tire Sci. Technol. TSTCA, 30(2), 100-121.   DOI
2 Sugiyama, S. and Otaki, T. (1992), "Mathematical model for brake hose layout", SAE Technical Paper 922123.
3 Sun, H., Di, S., Zhang, N., Pan, N. and Wu, C. (2003), "Micromechanics of braided composites via multivariable FEM", Comput. Struct., 81(20), 2021-2027.   DOI
4 Yang, P., Dyke, S.V. and Elhajjar, F. (2015), "An investigation into the mechanics of fiber reinforced composite disct springs", Steel Compos. Struct., 18(3), 775-791.   DOI
5 Zhang, C. and Xu, X. (2013), "Finite element analysis of 3D braided composites based on three unit-cell models", Compos. Struct., 98, 130-142.   DOI
6 Cho, J.R., Yoon, Y.H., Seo, C.W. and Kim, Y.G. (2015), "Fatigue
7 Nguyen Xuan, H., Coulomb, J.L., Gerbaud, L. and Crebier, J.C. (2010), "Application of progressive quadratic response surface method for an oscillation problem optimization", XI-th Int. Workshop Optimin. Inverse Prob. Electromagnetism.
8 Smith, K.N., Watson, P. and Topper, T.H. (1970), "A stress-strain function for the fatigue of materials", J. Mater., 5, 767-778.
9 Annie Peter, G.J., Lakshmanan N. and Iyer, N.R. (2016), "Behavior of light weight sandwich panels under out of plane bending loading", Steel Compos. Struct., 21(4), 775-789.   DOI
10 Altinkok, N. (2016), "Application of the full factorial design to modeling of Al2O3/SiC particle reinforced al-matrix composites", Steel Compos. Struct., 21(6), 1327-1345.   DOI
11 Entwistle, K.M. (1981), "The behavior of braided hydraulic hose reinforced with steel wires", Int. J. Mech. Sci., 23, 229-241.   DOI
12 Cho, J.R., Jee, Y.B., Kim, W.J., Han, S.R. and Lee, S.B. (2013), "Homogenization of braided fabric composite for reliable large deformation analysis of reinforced rubber hose", Composites: Part B, 53, 112-120.   DOI
13 Cho, J.R., Song, J.I. and Choi, J.H. (2006), "Prediction of effective mechanical properties of reinforced braid by 3-D finite element analysis", Key Eng. Mater., 306-308, 799-804.   DOI
14 Cho, J.R., Yoon, Y.H.,, Seo, C.W. and Kim, Y.G. (2015), " Fatigue life assessment of fabric braided composite rubber hose in compliecated large deformation cyclic motion", Finite Elem. Anal. Des., 100, 65-76.   DOI
15 D'Amato, E. (2001), "Finite element modeling of textile composites", Compos. Struct., 54(4), 467-475.   DOI
16 Daniel, I.M. and Ishai, O. (1994), Engineering Mechanics of Composite Materials, Oxford University Press. New York.
17 Ghazijahani, T.G., Jiao, H. and Holloway, D. (2015), "Fatigue tests of damaged tubes under flexural loading", Steel Compos. Struct., 19(1), 2015.
18 Ivanov, I. and Tabiel, A. (2002), "Flexible woven fabric micromechanical material model with fiber reorientation", Mech. Adv. Mater. Struct., 9(1), 37-51.   DOI
19 Keil, M., Rodriguez, J. and Hemmye, M. (2002), "Modeling and validation of large hydraulic hose deflections", SAE Technical Paper 2002-01-2589.
20 Kwack, S.B. and Choi, N.S. (2009), "Micro-damage formation of a rubber hose assembly for automotive hydraylic brakes under a durability test", Eng. Fail. Anal., 16(4), 1262-1269.   DOI
21 Li, D.S., Fang, D.N., Jiang, N. and Xuefeng, Y. (2011), "Finite element modeling of mechanical properties of 3D fivedirectional rectangular braided composites", Composites Part B, 42(6), 1373-1385.   DOI
22 Malagi, R.R. and Danawade, B.A. (2015), "Fatigue behavior of circular tube and wood filled circular hollow steel tube", Steel Compos. Struct., 19(3), 585-599.   DOI
23 Mayyas, A., Qattawi, A., Omar, M. and Shan, D. (2012), "Design for sustainability in automotive industry: A comprehensive review", Renew. Sust. Energ. Rev., 16(4), 1845-1862.   DOI
24 Midas IT (2011), User's Manual of midas NFX, Gyeonggi.
25 Palgren, A. (1926), "Die lebensdauer von Kugellagern", Zeitschr VDI, 68, 339-341.