1 |
Nah, H.S., Lee, H.J., Kim, K.S., Kim, J.H. and Kim, W.B. (2009a), "Method for estimating the clamping load of high strength bolts subjected to temperature variation", Int. J. Steel Struct., 9(2), 123-130.
DOI
|
2 |
Nah, H.S., Lee, H.J., Kim, K.S., Kim, J.H. and Kim, W.B. (2009b), "Evaluation of slip coefficient of slip critical joints with high strength bolts", Struct. Eng. Mech., Int. J., 32(4), 477-488.
DOI
|
3 |
Nah, H.S., Lee, H.J., Kim, K.S., Kim, J.H. and Kim, W.B. (2010), "Evaluating relaxation of high-strength bolts by parameters on slip faying surfaces of bolted connections", Int. J. Steel Struct., 10(3), 295-303.
DOI
|
4 |
RCSC Committee (2004), Specification for Structural Joints Using ASTM A325 or A490 Bolts; AISC Inc., Chicago, IL, USA.
|
5 |
Tambori, A.R. (1999), Handbook of Structural Steel Connection Design and Detail Design, MaGraw-Hill, USA.
|
6 |
Vand, E.H., Oskouei, R.H. and Chakherlou, T.N. (2008), "An experimental method for measuring clamping force in bolted connections and effect of bolt threads lubrication on its value", World Acad. Sci., Eng. Tech., 22, 457-460.
|
7 |
Yang, K.C., Hsu, R.J. and Chen, Y.J. (2011), "Shear strength of high-strength bolts at elevated temperature", Constr. Build. Mater., 25(8), 3656-3660.
DOI
|
8 |
Bickford, J.H. (2008), An Introduction to the Design and Behavior of Bolted Joints, (4th Ed.), CRC Press, New York, NY, USA.
|
9 |
Architectural Institute of Japan (2003), Guidebook on Design and Fabrication of High Strength Bolted Connections; AIJ, Japan.
|
10 |
ASTM F 2280-06 (2006), Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150ksi Minimum Tensile Strength; ASTM International, Philadelphia, PA, USA.
|
11 |
Bickford, J.H. and Nassar, S. (1998), Handbook of bolts and bolted joints, Marcel Dekker Inc., Madison Avenue, New York, NJ, USA.
|
12 |
Chakherlou, T.N., Abazadeh, B. and Vogwell, J. (2009), "The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks", Eng. Fail. Anal., 16(1), 242-253.
DOI
|
13 |
Cleary, D.B., Riddell, W.T. and Lacke, C.J. (2012), "Effect of washer placement on performance of direct tension indicators with curved protrusions", Eng. J., AISC, 49(2), 55-63.
|
14 |
Heistermann, C., Veljkovic, M., Simoes, R., Rebelo, C. and da Silva, L.S. (2013), "Design of slip resistant lap joint with long open slotted holes", J. Constr. Steel Res., 82, 223-233.
DOI
|
15 |
Khairedin, A., Dimitrios, N.K. and Charalambos, C.B. (2011), "Tightening and loosening torque of M253 bolts: experimental and analytical investigation", Inter. J. Eng. Info. Sci., 6(2), 69-83.
|
16 |
Kim, I.T., Lee, J.M., Huh, J.W. and Ahn, J.H. (2016), "Tensile behaviors of friction bolt connection with bolt head corrosion damage: Experimental research B", Eng. Fail. Anal., 59, 526-543.
DOI
|
17 |
Nah, H.S., Lee, H.J. and Choi, S.M. (2014), "Evaluating long-term relaxation of high strength bolts considering coating on slip faying surface", Steel Compos. Struct., Int. J., 16(6), 703-718.
DOI
|
18 |
Kulak, G.L., Fisher, J.W. and Struik, J.H.A. (2001), Guide to Design Criteria for Bolted and Riveted Joints, (2nd Ed.), AISC Inc., Chicago, IL, USA.
|
19 |
Minami, K., Tokutomi, Y., Shimizu, O., Kawamura, K. and Morii, S. (2013), "Bolt tightening tests of high strength bolted joint with metal sprayed contact surfaces", Civil Institute of Japan, 69(1), 133-138. [In Japanese]
|